Align documentation with clean baseline

AGENTS.md

@@ -33,17 +33,12 @@ It must support circuits, device rows, project devices, drag-and-drop restructur
 - General application repositories also require an explicit `AppDatabase`;
   `src/server/composition/application-repositories.ts` owns their runtime
   instances, and controllers never import the global SQLite client.
-- The upgrade-only legacy migration service follows the same dependency rule;
-  its concrete repositories are instantiated only in
-  `scripts/db-migrate-legacy-consumers.ts`.
 - General Circuit, CircuitDeviceRow, CircuitList and DistributionBoard
   repositories expose only active reads. Runtime writes belong in typed command
   repositories; direct integration fixtures belong under `tests/support`.
 
-The supported runtime model is Circuit-First. The former Consumer UI and API are
+The supported runtime model is Circuit-First. The former Consumer UI, API,
-removed. Retained `consumers` rows, migration mappings and reports are upgrade-only
+tables and upgrade tooling are removed; do not reintroduce them.
-data accessed by `npm run db:migrate:legacy-consumers`; do not build application
-features on them.
 
 See `docs/current-architecture.md` for the complete module and request flow.
 
@@ -250,14 +245,14 @@ Immutable revision metadata is available through the paginated
 stored command payloads.
 Named logical snapshots can be created and listed through project-scoped API
 endpoints. Their schema-versioned payload contains the complete supported
-project runtime state and a SHA-256, excludes global/upgrade-only data and does
+project runtime state and a SHA-256, excludes global data outside the project and does
 not change the project revision or undo/redo stacks. Restoring a server-stored
 snapshot verifies its checksum and the current-state hash, replaces supported
 project data atomically and records a new `restore` revision with a complete
 inverse command. Restore can therefore be undone and redone after a restart.
-Snapshot schema version 7 also contains circuit-group identity,
+Baseline snapshot schema version 1 contains circuit-group identity,
 distribution-board components and the separate circuit/component protection
-records. Versions 1 through 6 remain readable. Portable duplicate imports
+records. Pre-baseline snapshots are unsupported. Portable duplicate imports
 remap component ids and protection-owner references together with the existing
 project graph.
 The central revision boundary creates an automatic logical snapshot after each
@@ -294,13 +289,18 @@ change in one revision and Undo/Redo restores them together; the project PUT
 route requires `expectedRevision`. The system catalog is `AV`, `SV`, `EV`,
 `USV`, `MSR`, `SiBe`; at least one must be enabled and a type used by a board
 cannot be disabled.
-Distribution-board setup uses `distribution-board.insert` schema version 3
+Distribution-board setup uses `distribution-board.insert` schema version 1
 with a complete stable snapshot of the board, circuit list, three default
 groups, main switch `-Q0` and surge protective device `-FA`. Its
 inverse removes only the same unchanged and still-empty structure; the POST
 route requires `expectedRevision` and returns the updated history state.
-Stored schema-version 1 and 2 setup commands remain executable with their four
+Complete populated distribution-board copying and deletion use
-legacy sections and without invented components.
+`distribution-board.insert-subtree` and `distribution-board.delete-subtree`.
+Their exact snapshots include the board, circuit list, groups, circuits,
+device rows, components and all one-to-one protection data. Copy remaps all
+owning ids but preserves project-device and room links. Both operations are
+atomic persistent commands with restart-safe Undo/Redo; deletion requires an
+explicit UI warning.
 Mutable group-protection and auxiliary distribution-board components use
 `distribution-board-component.insert` and
 `distribution-board-component.delete`; edits and footer reordering use
@@ -335,15 +335,15 @@ UUID in foreign-key-safe order.
 The circuit-tree read model exposes fixed `headerComponents`, group-owned
 `components`, `footerComponents`, optional group category/number and optional
 one-to-one protection DTOs for circuits and group components. These are
-additive to the retained flat circuit protection fields during the transition.
+the only supported circuit-protection source; no flat compatibility fields remain.
 Distribution-board floor assignment and a project-enabled supply type use
 `distribution-board.update`; both values are snapshot/export fields and one
 persistent undo step.
-Floor and room setup use `project-floor.insert` and `project-room.insert` with
+Floor and room setup uses persistent insert, update and delete commands with
-complete stable snapshots. Their inverses remove only unchanged records and
+complete stable snapshots. Their inverses remove or restore only unchanged records and
 reject floors with assigned rooms/distribution boards or rooms referenced by
-device rows or retained upgrade data. Both POST routes require `expectedRevision` and return
+device rows. All write routes require `expectedRevision` and return the updated
-the updated history state.
+history state.
 
 Required operations:
 
@@ -382,7 +382,10 @@ Users must be able to override sizing suggestions.
 ## Persistence and Migration Rules
 
 - SQLite is the currently supported database.
-- Never edit an already applied migration.
+- Migration `0000` is the clean release baseline for empty databases.
+- Pre-baseline development databases, snapshots and stored commands are not
+  supported.
+- After the first release, never edit an already applied migration.
 - Back up an existing database before applying a new migration.
 - Inspect generated SQL; it must contain only the intended schema change.
 - Keep database backups separate from logical project snapshots.

README.md

@@ -108,11 +108,9 @@ npm run db:generate
 ```
 
 `db:backup` verwendet die SQLite-Online-Backup-API und prüft das Ergebnis auf
-Integrität und Fremdschlüsselverletzungen. Vor jeder Migration einer bestehenden
+Integrität und Fremdschlüsselverletzungen. Die Migration `0000` ist die
-Datenbank ist ein Backup erforderlich.
+Release-Baseline und richtet ausschließlich eine neue, leere Datenbank ein.
-
+Datenbanken aus Entwicklungsständen vor dieser Baseline werden nicht unterstützt.
-`db:migrate:legacy-consumers` und `db:backfill:sections` sind ausschließlich
-Upgrade-Werkzeuge für ältere Datenbanken. Neue Installationen benötigen sie nicht.
 
 ## Dokumentation
 

docs/README.md

@@ -20,9 +20,6 @@ ausdrücklich getrennt und dürfen nicht als bereits implementiert verstanden we
 
 - [Entwicklungs- und Contributor-Workflow](development-workflow.md)
 - [Deployment und Betrieb](deployment.md)
-- [Lokale Circuit-First-Datenbankmigration](local-db-circuit-first-migration.md)
-- [Retained Legacy-Datenmigration](circuit-list-editor-migration.md) –
-  ausschließlich für Upgrades alter Datenbanken
 
 ## Zukunftsarchitektur
 

docs/circuit-list-editor-api.md

@@ -74,8 +74,8 @@ Protected-board structure uses
 persisted inverse of a delete. The dispatcher also supports the documented
 project-device, project settings, distribution-board and project-location
 commands. The generic editor commands listed here use schema version `1`;
-older stored formats can remain supported by their owning command boundary.
+the clean pre-release baseline does not accept older development formats.
-Unsupported types are rejected. Insert commands contain the complete entity or circuit block
+Unsupported types or schema versions are rejected. Insert commands contain the complete entity or circuit block
 with stable ids; delete commands include the expected parent identity. Circuit
 snapshots contain zero, one or multiple complete device rows. Move commands
 contain each row's expected and target circuit plus its exact expected and
@@ -225,14 +225,27 @@ returns HTTP `409` with `PROJECT_HISTORY_OPERATION_UNAVAILABLE`.
     `{ "distributionBoard": { ... }, "revision": { ... }, "history": { ... } }`
   - persistent Undo removes only the unchanged and still-empty generated
     structure; Redo restores the same ids
-  - stored command schema versions 1 and 2 remain executable with their four
-    legacy sections and without generated components
   - stale revisions return `409 PROJECT_REVISION_CONFLICT`
 - `PUT /projects/:projectId/distribution-boards/:distributionBoardId`
   - body:
     `{ "floorId": null, "supplyType": "AV", "expectedRevision": 13 }`
   - executes `distribution-board.update`; floor and supply type are restored
     together by persistent Undo/Redo
+- `POST /projects/:projectId/distribution-boards/:distributionBoardId/copy`
+  - body: `{ "name": "UV-02 Kopie", "expectedRevision": 14 }`
+  - duplicates the complete distribution-board subtree with new owning UUIDs
+    while preserving project-device and room links
+  - response includes the new `distributionBoard`, its `circuitList`, the
+    revision and current history state
+- `DELETE /projects/:projectId/distribution-boards/:distributionBoardId`
+  - body: `{ "expectedRevision": 15 }`
+  - removes the complete, exactly captured distribution-board subtree in one
+    transaction
+  - response includes `distributionBoardId`, the revision and current history
+    state
+- Copy and deletion use `distribution-board.insert-subtree` and
+  `distribution-board.delete-subtree`. Persistent Undo/Redo restores or
+  removes the same complete subtree, including protection devices.
 
 ### Project Floors and Rooms
 
@@ -240,16 +253,27 @@ returns HTTP `409` with `PROJECT_HISTORY_OPERATION_UNAVAILABLE`.
   - body: `{ "name": "EG", "expectedRevision": 13 }`
   - executes `project-floor.insert` with a stable floor id
   - response: `{ "floor": { ... }, "revision": { ... }, "history": { ... } }`
+- `PUT /projects/:projectId/floors/:floorId`
+  - body: `{ "name": "1. OG", "expectedRevision": 14 }`
+  - executes an exact persistent floor update
+- `DELETE /projects/:projectId/floors/:floorId`
+  - body: `{ "expectedRevision": 15 }`
+  - rejects floors with assigned rooms or distribution boards
 - `POST /projects/:projectId/rooms`
   - body:
     `{ "floorId": "floor_1", "roomNumber": "001", "roomName": "Technik", "expectedRevision": 14 }`
   - executes `project-room.insert` with a stable room id; `floorId` is optional
     and must belong to the project when present
   - response: `{ "room": { ... }, "revision": { ... }, "history": { ... } }`
-- Persistent Undo removes only unchanged, unreferenced records. A floor with
+- `PUT /projects/:projectId/rooms/:roomId`
-  assigned rooms or distribution boards and a room referenced by device rows
+  - body:
-  or retained upgrade data are rejected instead of silently clearing foreign
+    `{ "floorId": null, "roomNumber": "101", "roomName": "Büro", "expectedRevision": 16 }`
-  keys.
+  - updates number, name and optional floor as one persistent command
+- `DELETE /projects/:projectId/rooms/:roomId`
+  - body: `{ "expectedRevision": 17 }`
+  - rejects rooms referenced by device rows
+- Persistent Undo/Redo restores exact previous and target records without
+  silently clearing foreign keys.
 - Stale revisions return `409 PROJECT_REVISION_CONFLICT`.
 
 ### Tree Endpoint
@@ -343,12 +367,6 @@ available only as the corresponding versioned commands through
 structure POST, move, reorder, renumber, identifier-restore, Circuit DELETE or
 CircuitDeviceRow DELETE routes.
 
-## Removed Legacy Endpoints
-
-The former `/consumers` read/write endpoints were removed after every retained
-consumer had a verified Circuit-First migration mapping. Database upgrade tooling
-reads retained legacy rows directly; application features must use the Circuit-First
-endpoints above.
 
 ## Linked Project Device Review
 

docs/circuit-list-editor-architecture.md

@@ -49,11 +49,6 @@ The pure grid modules have no React state and are covered by focused unit tests.
   - Represents fixed header components, optional group protection and manually
     named auxiliary footer devices with their own unique BMK.
   - Group protection may own a separate one-to-one protection configuration.
-- Retained legacy migration source
-  - Old `consumers` rows, mappings and reports are available only to explicit
-    database upgrade tooling.
-  - They are not application-domain entities and have no UI or API.
-
 ## Why A Circuit Is Not One Row
 
 A circuit can contain zero, one, or many device rows. Treating a circuit as a single row breaks:
@@ -116,8 +111,8 @@ Primary circuit-first editor route:
 
 - `/projects/:projectId/circuit-lists/:circuitListId/tree-edit`
 
-The sibling `/tree` route is a read-only structure preview. Old
+Old `/projects/:projectId/circuit-lists` bookmarks redirect to the project
-`/projects/:projectId/circuit-lists` bookmarks redirect to the project page.
+page. A future print view will provide a dedicated read-only presentation.
 
 ## Future Persistence Direction
 

docs/circuit-list-editor-known-limitations.md

@@ -23,4 +23,3 @@
 - Protection and cable values are planner-owned manual selections. The later
   sizing/warning engine does not yet validate them against load, length or
   voltage-drop rules.
-- Legacy consumer UI and server endpoints are removed; retained source rows and migration mappings remain available only for upgrade traceability.

docs/circuit-list-editor-migration.md

@@ -1,90 +0,0 @@
-# Circuit List Editor Migration
-
-## Status
-
-Upgrade-only. New installations already use the Circuit-First schema and do not
-run this workflow.
-
-## Goal
-
-Migrate legacy row-first consumers into the circuit-first model without deleting legacy data.
-
-## Legacy Mapping
-
-Legacy `Consumer` rows map into:
-
-- `Circuit` for shared circuit identity and circuit-level technical fields
-- `CircuitDeviceRow` for per-device load rows
-
-Multiple legacy consumers can map into one circuit when they share normalized circuit identity.
-
-For one circuit list, all new circuits, device rows, trace mappings and the migration report are committed in one SQLite transaction. A failed run therefore leaves none of those prepared migration writes behind.
-
-## Grouping Strategy (`circuitNumber`)
-
-Migration groups legacy rows by normalized `circuitNumber`:
-
-- valid/normalizable values become one target circuit per normalized value
-- duplicates are grouped under that circuit (multiple `CircuitDeviceRow`s)
-- missing/invalid values trigger generated identifiers and may fall back to `unassigned` section
-
-## Default Section Backfill
-
-Before migration, default sections are created/backfilled per circuit list.  
-This guarantees a valid target section space, including `unassigned` when no section can be inferred.
-
-## Migration Commands
-
-Run in this order for local database workflows:
-
-1. Backup:
-   - `npm run db:backup`
-2. Migrate schema:
-   - `npm run db:migrate`
-3. Verify circuit schema:
-   - `npm run db:verify:circuit-schema`
-4. Backfill missing sections:
-   - `npm run db:backfill:sections`
-5. Migrate legacy consumers:
-   - `npm run db:migrate:legacy-consumers`
-
-The migration command finishes with a cutover verification across the complete
-database. It exits with an error while any legacy consumer lacks a migration
-mapping, including consumers that cannot be migrated because they have no circuit
-list assignment. The legacy multi-list UI was removed only after this check passed;
-old `/projects/:projectId/circuit-lists` bookmarks redirect to the project page.
-
-## Validation Checks
-
-After migration, verify:
-
-- tree endpoint returns sections/circuits/rows
-- grouped duplicate circuit numbers are reported
-- generated identifiers are reported where expected
-- migrated rows include `legacyConsumerId` traceability
-- no duplicate BMKs exist inside one circuit list
-
-## If Tree Endpoint Returns Empty Sections
-
-Likely causes:
-
-- circuit-first tables missing (migration not run)
-- sections not backfilled yet
-- migrated dataset genuinely empty for selected list
-
-Actions:
-
-1. Run schema migration and verification commands.
-2. Run section backfill command.
-3. Run legacy-consumer migration command.
-4. Retry tree endpoint.
-
-## Legacy Data Retention
-
-Do not delete legacy consumers yet.
-
-- legacy read/write endpoints have been removed from the application server
-- migration trace tables reference old/new mapping
-- retained rows allow upgrade verification and audit of the completed mapping
-- a future automatic cleanup migration must migrate and verify old databases
-  before dropping these source and trace tables

docs/current-architecture.md

@@ -9,10 +9,8 @@ Der unterstützte Editor ist Circuit-First:
 Ein Stromkreis ist nicht dasselbe wie eine Gerätezeile. BMK, Schutz- und Kabeldaten
 gehören zum Stromkreis; Last-, Raum- und Kategoriedaten gehören zur Gerätezeile.
 
-Die frühere Consumer-Oberfläche und ihre API sind entfernt. Die Tabelle
+Die frühere Consumer-Oberfläche, ihre API, Tabellen und Upgrade-Werkzeuge sind
-`consumers` sowie Mappings und Reports bleiben ausschließlich erhalten, damit
+entfernt. Neue Funktionen bauen ausschließlich auf dem Circuit-First-Modell auf.
-ältere Datenbanken über den expliziten Upgrade-Befehl migriert und geprüft werden
-können.
 
 ## Laufzeit
 
@@ -130,8 +128,8 @@ Datenbank-Backups gespeichert. `POST /api/projects/:projectId/snapshots`
 erzeugt bei passender erwarteter Revision transaktional einen vollständigen,
 schema-versionierten Projektzustand mit SHA-256-Prüfwert. Enthalten sind
 Projekteinstellungen, Verteiler, Stromkreislisten, Bereiche, Stromkreise und
-Gerätezeilen sowie Projektgeräte, Geschosse und Räume. Globale Geräte,
+Gerätezeilen sowie Projektgeräte, Geschosse und Räume. Globale Geräte sind nicht
-Legacy-Consumer und Migrationsberichte sind nicht Teil des Projekt-Snapshots.
+Teil des Projekt-Snapshots.
 Create/List verändern weder Projektrevision noch Undo-/Redo-Stapel.
 `kind` unterscheidet benannte und automatische Stände. Die zentrale
 Revisionspersistenz erzeugt nach jeweils 25 weiteren Projektänderungen
@@ -144,9 +142,7 @@ Prüfsumme, erwartete Revision und den unmittelbar zuvor gelesenen
 Projektzustand. Der Restore ersetzt alle unterstützten Projektdaten in einer
 Transaktion und schreibt dabei eine neue Revision mit Quelle `restore` sowie
 ein vollständiges inverses Kommando. Undo und Redo können deshalb auch einen
-Restore nach einem Neustart exakt zurücknehmen oder wiederholen. Kompatible
+Restore nach einem Neustart exakt zurücknehmen oder wiederholen.
-Upgrade-only-Verknüpfungen und Migrationsnachweise bleiben erhalten, obwohl sie
-nicht Bestandteil des logischen Snapshots sind.
 Die Projektseite bindet diese APIs in einem einklappbaren Bereich
 „Versionen und Sicherungspunkte“ ein. Dort können Benutzer Sicherungspunkte
 benennen, jeden aufgeführten benannten oder automatischen Stand nach
@@ -246,8 +242,7 @@ Store leitet das inverse Kommando aus dem gespeicherten Projekt ab und schreibt
 Werte, Revision und Historienstapel gemeinsam. `PUT /api/projects/:projectId`
 verlangt deshalb `expectedRevision`, liefert Projekt plus aktualisierten
 Historienstand und besitzt keinen separaten direkten Settings-Schreibweg mehr.
-Kommando- und Snapshot-Versionen vor dieser Erweiterung bleiben les- und
+Kommando- und Snapshot-Payloads müssen dem aktuellen Baseline-Schema entsprechen.
-ausführbar; fehlende Metadaten werden dabei als `null` behandelt.
 Die Projektseite zeigt Verteilungen, Etagen und Räume als kompakte
 Bestandsübersichten; ihre versionierten Erstellwege öffnen beschriftete Modals
 statt dauerhafter Eingabezeilen. Projektgeräte werden als durchsuchbare,
@@ -263,16 +258,16 @@ läuft über `project.restore-state` und ist dadurch eine atomare, dauerhaft
 rückgängig machbare Projektrevision. Der Modus `duplicate` ordnet Projekt-,
 Struktur-, Gruppen-, Verteilerkomponenten-, Raum-, Stromkreis- und
 Gerätezeilen-UUIDs sowie Schutzgeräte-Referenzen vollständig neu zu und legt
-die Kopie mit Revision `0` in einer Transaktion an. Upgrade-only-
+die Kopie mit Revision `0` in einer Transaktion an. Fachliche Verknüpfungen
-Consumer-Verweise werden nicht in die Kopie übernommen; fachliche Verknüpfungen
+innerhalb des unterstützten Laufzeitmodells bleiben
-innerhalb des unterstützten Laufzeitmodells bleiben erhalten. Die
+erhalten. Die
 Projektübersicht verwendet dafür den separaten Collection-Endpunkt
 `POST /api/projects/import`, der ausschließlich eine neue Kopie anlegt und
 deshalb weder eine bestehende Projekt-ID noch `expectedRevision` annimmt. Das
 Ersetzen eines Projekts bleibt auf dessen Einstellungsmodal und den
 projektgebundenen Endpunkt beschränkt.
 `distribution-board.insert` versioniert die Anlage einer Verteilung mit
-Command-Schema 3 als vollständigen Block aus Verteilung, Stromkreisliste, den
+Command-Schema 1 als vollständigen Block aus Verteilung, Stromkreisliste, den
 drei Gruppen `Beleuchtung 1`, `1-phasig 1`, `3-phasig 1`, Hauptschalter `-Q0`
 und Überspannungsableiter `-FA`.
 Alle UUIDs entstehen vor dem Command und bleiben über Undo/Redo stabil.
@@ -283,8 +278,16 @@ Controller-Schreibweg ist entfernt. Verteilungen besitzen eine optionale
 Etagenreferenz sowie eine Netzart aus dem Projektkatalog. Anlage und
 nachträgliche Bearbeitung prüfen die Projektzugehörigkeit der Etage und die
 Freigabe der Netzart in den Projekteinstellungen.
-Gespeicherte Anlage-Commands der Schemas 1 und 2 bleiben mit ihren vier
+Bereits befüllte Verteilungen werden über
-Legacy-Abschnitten und ohne nachträglich erfundene Komponenten ausführbar.
+`distribution-board.insert-subtree` und `distribution-board.delete-subtree`
+als vollständiger Unterbaum kopiert beziehungsweise gelöscht. Der Snapshot
+umfasst Verteilung, Stromkreisliste, Gruppen, Stromkreise, Gerätezeilen,
+Verteilerkomponenten und alle zugehörigen Schutzgeräte. Beim Kopieren werden
+sämtliche besitzenden UUIDs neu vergeben, während fachliche Verknüpfungen zu
+Projektgeräten und Räumen erhalten bleiben. Beide Aktionen sind atomare
+Projektrevisionen und bleiben nach einem Neustart über Undo/Redo umkehrbar. Die
+Projektseite bietet sie im Einstellungsmodal der jeweiligen Verteilung an;
+Löschen verlangt dort eine ausdrückliche Bestätigung.
 `distribution-board-component.insert` und
 `distribution-board-component.delete` sowie
 `distribution-board-component.update` versionieren Anlage, Entfernung,
@@ -346,9 +349,9 @@ Teilwiederherstellungen.
 Der Circuit-Tree liefert zusätzlich `headerComponents`,
 gruppenbezogene `components` und `footerComponents`. Abschnitte enthalten
 optionale Gruppenkategorie und -nummer; Stromkreise und Gruppenkomponenten
-enthalten ihre optionale getrennte Schutzgerätekonfiguration. Die bisherigen
+enthalten ihre getrennte Schutzgerätekonfiguration. Die
-flachen Stromkreis-Schutzfelder bleiben während der Übergangsphase additiv
+1:1-Schutzgerätetabellen sind die einzige unterstützte Quelle dieser Daten.
-erhalten. Separate aktive Read-Repositories lesen Komponenten- und beide
+Separate aktive Read-Repositories lesen Komponenten- und beide
 Schutzgerätetabellen; Schreibzugriffe bleiben ausschließlich in Commands.
 `src/frontend/utils/circuit-structure-projection.ts` projiziert diesen Tree
 rein und deterministisch in die drei Zonen Kopf, vollständige Gruppen und Fuß.
@@ -378,12 +381,12 @@ Projektzugehörigkeit und schreibt Schutzgerät, Revision und Historienübergang
 atomar. Benutzer können Schutzdaten anlegen oder ändern, aber nicht entfernen;
 Undo einer erstmaligen Anlage darf den zuvor fehlenden Datensatz exakt
 wiederherstellen.
-Der vollständige `CircuitSnapshot` kann rückwärtskompatibel einen
+Der vollständige `CircuitSnapshot` enthält den zugehörigen
-`protectionDevice`-Datensatz enthalten. Neue gruppierte Stromkreise und durch
+`protectionDevice`-Datensatz, sofern einer vorhanden ist. Neue Stromkreise und
-Geräteverschiebung erzeugte Zielstromkreise verwenden die vereinbarten
+durch Geräteverschiebung erzeugte Zielstromkreise verwenden die vereinbarten
 Kategorie-Standardwerte und schreiben Schutzgerät, Stromkreis sowie
 Gerätezeilen atomar. Delete/Undo erfasst denselben Datensatz vollständig.
-Im Editor sind die bisherigen Schutzspalten deshalb nur noch eine
+Im Editor sind die Schutzspalten deshalb eine
 schreibgeschützte Projektion der 1:1-Daten; Änderungen erfolgen über ein
 geräteabhängiges Schutzgeräte-Modal und `circuit-protection.update`.
 Gruppen lassen sich im Editor schrittweise nur gegenüber einer benachbarten
@@ -411,34 +414,26 @@ wieder her.
 verteilerweiten Gleichzeitigkeitsfaktor gemeinsam und stellt alle Werte über
 dauerhaftes Undo/Redo wieder her. Der Faktor liegt zwischen `0` und `1` und
 ist für bestehende sowie neu angelegte Verteilungen standardmäßig `1`.
-Snapshot-Schema 6 und der portable Projekttransfer enthalten diesen Wert;
+Das aktuelle Baseline-Snapshot-Schema enthält den Gleichzeitigkeitsfaktor,
-Schema 5 und älter werden mit dem neutralen Faktor `1` hochgestuft.
+Gruppenkategorie und -nummer, Verteilerkomponenten sowie die getrennten
-Snapshot-Schema 4 enthält bereits Etage und Netzart; Schema 1/2 sowie
+1:1-Schutzgerätedaten. Capture,
-gespeicherte Version-1-Strukturcommands werden ohne erfundene Zuordnung
-hochgestuft. Snapshot-Schema 3 wird mit allen sechs Netzarten als
-Projektauswahl hochgestuft.
-Snapshot-Schema 7 ergänzt Gruppenkategorie und -nummer,
-Verteilerkomponenten sowie die getrennten 1:1-Schutzgerätedaten. Capture,
 benannte und automatische Snapshots, Wiederherstellung, Undo/Redo und beide
-JSON-Importmodi verwenden denselben vollständigen Zustand. Schema 6 und älter
+JSON-Importmodi verwenden denselben vollständigen Zustand. Vorherige
-bleiben lesbar: Die drei bekannten Abschnittsschlüssel werden deterministisch
+Entwicklungsschemas werden nicht mehr eingelesen.
-Gruppe 1 zugeordnet, neue Komponenten- und Schutzgerätesammlungen bleiben leer
+Persistente Insert-, Update- und Delete-Commands versionieren Anlage,
-und bestehende flache Schutzangaben unverändert erhalten.
+Bearbeitung und Löschung von Geschossen und Räumen mit stabilen UUIDs und
-`project-floor.insert` und `project-room.insert` versionieren die Anlage von
+exakten Vorher-/Nachher-Snapshots. Ein Geschoss wird nur
-Geschossen und Räumen mit stabilen UUIDs. Die vollständigen Datensätze bilden
-jeweils die persistierte Inverse für Undo/Redo. Ein Geschoss wird durch Undo nur
 entfernt, solange ihm weder ein Raum noch eine Verteilung zugeordnet wurde. Ein
-Raum wird nur entfernt,
+Raum wird nur entfernt, solange keine CircuitDeviceRow auf ihn verweist. Alle
-solange weder eine CircuitDeviceRow noch ein aufbewahrter Upgrade-Datensatz auf
+Schreibendpunkte verlangen `expectedRevision` und liefern den aktualisierten
-ihn verweist. Beide POST-Endpunkte verlangen `expectedRevision`, liefern den
+Historienstand.
-aktualisierten Historienstand und besitzen keinen direkten Create-Schreibweg
-mehr.
 
 ## Projektgeräte
 
-`ProjectDevice` verwendet ausschließlich die kanonischen Circuit-First-Felder:
+Die Projektgerätekategorie `lighting`, `single_phase` oder `three_phase` ist die
-`phaseType`, `powerPerUnit`, `simultaneityFactor`, `cosPhi`, `remark` sowie
+fachliche Klassifikation und Zielgruppe. `phaseType` ist keine separate
-optionale technische und kategorisierende Felder.
+Benutzereingabe, sondern wird daraus für Spannung, Verknüpfung und spätere
+Dimensionierung abgeleitet.
 
 Beim Einfügen entsteht eine verknüpfte `CircuitDeviceRow`. Der Anzeigename wird
 kopiert, aber nicht still synchronisiert. Spätere Änderungen am Projektgerät
@@ -452,32 +447,30 @@ Kopieren in ein Projekt erzeugt ein eigenständiges Projektgerät.
 
 - SQLite ist die aktuell unterstützte Datenbank.
 - Fremdschlüssel werden für jeden Datenbankkontext aktiviert.
-- `npm run db:migrate` wendet Drizzle-Migrationen an.
+- `npm run db:migrate` richtet mit der einzelnen Migration `0000` das komplette
+  aktuelle Schema einer leeren Datenbank ein.
 - `npm run db:verify:circuit-schema` prüft erforderliche und entfernte Spalten.
 - `npm run db:backup` erzeugt ein konsistentes und verifiziertes Online-Backup.
-- `npm run typecheck:scripts` prüft alle TypeScript-Wartungs- und
+- `npm run typecheck:scripts` prüft die TypeScript-Wartungsskripte, ohne Code zu
-  Upgrade-Skripte mit ihren Anwendungspfaden, ohne Code zu erzeugen.
+  erzeugen.
-- Angewendete Migrationen werden niemals nachträglich verändert.
+- Die Baseline ersetzt alle vorigen Entwicklungsmigrationen. Datenbanken,
-- `db:migrate:legacy-consumers` ist Upgrade-Werkzeug, kein Anwendungspfad.
+  Snapshots und persistierte Commands aus Vor-Baseline-Ständen werden bewusst
-  Der fachliche Migrationsdienst kennt nur schmale Reader-/Store-Ports unter
+  nicht unterstützt. Ab der ersten veröffentlichten Version sind angewendete
-  `src/domain/ports`; konkrete SQLite-Repositories werden ausschließlich im
+  Migrationen unveränderlich und Änderungen erfolgen additiv.
-  CLI-Skript zusammengesetzt.
 - Allgemeine Circuit-, Gerätezeilen-, CircuitList- und DistributionBoard-
   Repositories stellen im Anwendungspfad nur noch benötigte Leseabfragen bereit.
-  Fachliche Schreibvorgänge liegen in den typisierten Command-Repositories;
+  Fachliche Schreibvorgänge liegen in den typisierten Command-Repositories.
-  Upgrade-Schreibvorgänge bleiben in expliziten Migrationsadaptern.
 - Die vollständige Verteilungs-Testfixture liegt unter
   `tests/support/distribution-board-fixture.ts` und ist kein exportierter
   Produktions-Schreibweg.
-- Migration `0024` bildet die additive relationale Grundlage für geschützte
+- Die Baseline bildet die relationale Grundlage für geschützte Stromkreisgruppen
-  Stromkreisgruppen und Verteilerkomponenten. Die drei bestehenden
+  und Verteilerkomponenten. Separate
-  Stromkreisabschnitte erhalten Kategorie und Gruppennummer 1. Separate
+  1:1-Tabellen halten Stromkreis- und Komponenten-Schutzgeräte. Die früheren
-  1:1-Tabellen halten künftig Stromkreis- und Komponenten-Schutzgeräte; die
+  flachen Stromkreis-Schutzfelder sind aus der Baseline entfernt.
-  bisherigen flachen Schutzfelder bleiben in dieser Übergangsphase unverändert.
   Ein triggergeführtes Register erzwingt bereits eine normalisierte,
   stromkreislistenweite BMK-Eindeutigkeit über Stromkreise und
   Verteilerkomponenten. Snapshot- und Transfer-Integration verwenden
-  Snapshot-Schema 7. Persistente Insert/Delete/Update-Commands für
+  Snapshot-Schema 1 der Baseline. Persistente Insert/Delete/Update-Commands für
   veränderliche Verteilerkomponenten, Gruppen einschließlich befüllter
   Unterbäume sowie vollständige Gruppensortierung sind integriert. Der Editor
   zeigt die geschützte Struktur an und bearbeitet veränderliche Gruppen- und

docs/development-workflow.md

@@ -96,18 +96,19 @@ erneut direkte Schreibmethoden erhalten.
 
 ## Migrationen
 
-1. Bestehende lokale Datenbank sichern: `npm run db:backup`.
+1. Schema unter `src/db/schema/` ändern.
-2. Schema unter `src/db/schema/` ändern.
+2. `npm run db:generate` ausführen.
-3. `npm run db:generate` ausführen.
+3. Das generierte SQL vollständig prüfen; es darf nur die beabsichtigte Änderung
-4. Das generierte SQL vollständig prüfen; es darf nur die beabsichtigte Änderung
    enthalten.
-5. Upgrade-/Erhaltungstest ergänzen, wenn Spalten oder Beziehungen geändert
+4. Upgrade-/Erhaltungstest ergänzen, wenn Spalten oder Beziehungen geändert
    werden.
-6. `npm test`, `npm run db:migrate` und
+5. `npm test`, `npm run db:migrate` und
    `npm run db:verify:circuit-schema` ausführen.
 
-Bereits angewendete SQL-Migrationen dürfen nicht geändert oder neu sortiert
+`0000` ist die saubere Baseline für leere Neuinstallationen. Vor-Baseline-
-werden. Korrekturen erfolgen immer über eine neue Migration.
+Entwicklungsdatenbanken werden nicht aktualisiert. Nach Veröffentlichung der
+ersten Version dürfen angewendete SQL-Migrationen nicht geändert oder neu
+sortiert werden; Korrekturen erfolgen dann immer über eine neue Migration.
 
 ## Pull-Request-Handoff
 

docs/local-db-circuit-first-migration.md

@@ -1,137 +0,0 @@
-# Local DB Migration: Circuit-First Schema
-
-This project uses SQLite at `data/leistungsbilanz.db` and Drizzle migrations in `src/db/migrations`.
-
-This document is an upgrade runbook for databases created before the Circuit-First
-cutover. A clean installation only needs the normal `db:migrate` and schema
-verification steps documented in the main README.
-
-## Safe command order
-
-1. Backup local DB (required before schema/data migration)
-
-```bash
-npm run db:backup
-```
-
-The command uses SQLite's online backup API, so committed WAL changes are included
-even while the application is running. It opens the resulting standalone database
-and requires both `PRAGMA integrity_check` and `PRAGMA foreign_key_check` to pass.
-Database backups are operational recovery files and remain separate from the future
-user-visible project version history.
-
-2. Apply pending schema migrations (includes `0008_circuit_first_model`, the additive
-   `0009_project_device_circuit_fields` transition and the post-cutover
-   `0011_project_device_canonical_fields` cleanup)
-
-```bash
-npm run db:migrate
-```
-
-3. Verify circuit-first tables exist
-
-```bash
-npm run db:verify:circuit-schema
-```
-
-4. Backfill default sections for existing `circuit_lists`
-
-```bash
-npm run db:backfill:sections
-```
-
-5. Run legacy consumer -> circuit/device-row migration explicitly
-
-```bash
-npm run db:migrate:legacy-consumers
-```
-
-## Verification SQL
-
-Run these against `data/leistungsbilanz.db`:
-
-```sql
-SELECT name
-FROM sqlite_master
-WHERE type = 'table'
-  AND name IN (
-    'circuit_sections',
-    'circuits',
-    'circuit_device_rows',
-    'legacy_consumer_circuit_migrations',
-    'legacy_consumer_migration_reports'
-  )
-ORDER BY name;
-```
-
-The verification command also checks the circuit-first project-device columns added by migration `0009`.
-
-```sql
-SELECT circuit_list_id, key, prefix, sort_order
-FROM circuit_sections
-ORDER BY circuit_list_id, sort_order;
-```
-
-```sql
-SELECT circuit_list_id, COUNT(*) AS circuits
-FROM circuits
-GROUP BY circuit_list_id;
-```
-
-```sql
-SELECT c.circuit_list_id, COUNT(r.id) AS device_rows
-FROM circuits c
-LEFT JOIN circuit_device_rows r ON r.circuit_id = c.id
-GROUP BY c.circuit_list_id;
-```
-
-## API verification
-
-After the steps above:
-
-`GET /api/projects/:projectId/circuit-lists/:circuitListId/tree`
-
-Expected response shape:
-
-```json
-{
-  "circuitListId": "string",
-  "sections": [
-    {
-      "id": "string",
-      "key": "lighting|single_phase|three_phase|unassigned|...",
-      "displayName": "string",
-      "prefix": "-1F|-2F|-3F|-UF|...",
-      "sortOrder": 10,
-      "circuits": [
-        {
-          "id": "string",
-          "equipmentIdentifier": "-2F1",
-          "displayName": "string",
-          "sortOrder": 10,
-          "isReserve": false,
-          "circuitTotalPower": 1.23,
-          "deviceRows": [
-            {
-              "id": "string",
-              "displayName": "string",
-              "quantity": 1,
-              "powerPerUnit": 0.3,
-              "simultaneityFactor": 1,
-              "rowTotalPower": 0.3
-            }
-          ]
-        }
-      ]
-    }
-  ]
-}
-```
-
-If migrations were not applied, endpoint may return an empty fallback with a warning.
-
-## Visual verification
-
-Manual device rows and multi-device circuits can be created directly in the
-circuit-list editor. The former development scripts for direct database writes
-were removed because they bypassed project revisions and persistent undo/redo.

docs/project-history-and-external-model-architecture.md

@@ -84,7 +84,8 @@ Implemented named-snapshot foundation:
   stores the complete project state in one SQLite transaction
 - the versioned payload contains project settings, distribution boards,
   circuit lists, sections, circuits with device rows, project devices, floors
-  and rooms while excluding global and upgrade-only data
+  and rooms while excluding the global device catalog and other
+  non-project-owned data
 - snapshot creation/listing does not create a project revision or affect
   undo/redo eligibility
 - public Create/List endpoints expose metadata but not the logical payload
@@ -93,8 +94,6 @@ Implemented named-snapshot foundation:
 - restore records a new `restore` revision containing both the selected target
   state and the complete pre-restore inverse; undo/redo therefore remains
   available after application restarts
-- compatible upgrade-only Consumer links, mappings and reports are preserved
-  separately and are never imported into the logical snapshot payload
 - arbitrary restore payloads are rejected by the generic user-command
   endpoint; only server-stored snapshots can initiate a forward restore
 - the project page provides an initially collapsed snapshot/timeline panel,

docs/spec/03-data-model-concept.md

@@ -6,9 +6,10 @@ This is a conceptual model for Codex. It is not a final database schema, but the
 
 A distribution board contains a circuit list.
 
-A circuit list contains sections.
+A circuit list contains circuit groups. `CircuitSection` is the persisted name
+of that group aggregate.
 
-A section contains circuits.
+A circuit group contains circuits of one category.
 
 A circuit contains zero, one or multiple device rows.
 
@@ -60,29 +61,28 @@ User-facing fields:
 - `section`
 - `displayName` optional
 - `circuitTotalPower`
-- `protectionType`
+- `protectionDevice`
-- `protectionRatedCurrent`
-- `protectionCharacteristic`
 - `cableType`
 - `cableCrossSection`
 - `cableLength`
-- `rcdAssignment` optional
 - `terminalDesignation` optional
-- `voltage` optional
+- `voltage`, derived from project settings and phase category
 - `controlRequirement` optional, for example DALI or KNX
 - `status` optional
 - `isReserve` optional
 - `remark` optional
 
+`protectionDevice` is the circuit-owned one-to-one protection configuration.
+It contains the device type, rated current and only the type-dependent values
+such as trip characteristic or residual current. Newly created circuits
+receive the category default defined in the protection catalog.
+
 Circuit-level fields only:
 
-- protection type
+- protection device and all of its technical values
-- protection rated current
-- protection characteristic
 - cable type
 - cable cross-section
 - cable length
-- RCD assignment
 - terminal designation
 - circuit total power
 

docs/spec/07-implementation-phases-todo.md

@@ -342,9 +342,8 @@ Implemented foundation:
 - circuit-device-row transaction tests cover both successful commits and forced SQLite rollbacks
 - project-device row synchronization has real multi-row SQLite commit and rollback coverage
 - BMK swaps and section reorder have real SQLite commit and rollback coverage
-- the legacy consumer migration service depends only on narrow domain ports;
+- the former Consumer migration service, mappings and reports were removed with
-  all concrete repositories are composed at the script entry point
+  the pre-release database cutover
-- legacy circuit, row, mapping and report writes have real late-failure rollback coverage
 - circuit and device-row persistence value mapping is separated from the general repositories
 - obsolete direct Circuit, CircuitDeviceRow, CircuitList, DistributionBoard and
   Project repository writes are removed; integration fixtures live under
@@ -362,8 +361,9 @@ Implemented foundation:
   direct global SQLite access
 - TypeScript maintenance and upgrade scripts have a dedicated no-emit
   typecheck, including all referenced application modules
-- the legacy consumer UI and application read/write endpoints are removed after verified data cutover
+- the former Consumer UI, API, tables and upgrade tooling are removed
-- retained legacy rows are accessible only through explicit database upgrade tooling
+- migration `0000` is the clean baseline for new installations; pre-baseline
+  development databases are intentionally unsupported
 - project devices no longer persist duplicate legacy power, phase, cosPhi or remark fields
 
 ## Phase 12: Project Revisions and Persistent Undo / Redo
@@ -559,11 +559,11 @@ PostgreSQL should be introduced when shared multi-user operation, background job
 
 Goal:
 
-After the legacy consumer path has been removed, provide one accurate entry point for developers, contributors and LLM-assisted work.
+With the former Consumer path removed, provide one accurate entry point for developers, contributors and LLM-assisted work.
 
 Timing:
 
-- perform the final rewrite after legacy cutover so the documentation describes only the supported architecture
+- keep the post-cleanup documentation limited to the supported architecture
 - update documentation incrementally during earlier phases, but do not present transitional paths as the long-term design
 
 README target structure:
@@ -618,7 +618,8 @@ Implemented handoff:
 
 - README is a concise setup and project entry point without prototype status lists
 - `docs/README.md` separates current, operational, future, specification and archived material
-- current runtime, module boundaries and upgrade-only legacy data are documented explicitly
+- current runtime and module boundaries are documented without compatibility
+  paths for unsupported pre-release data formats
 - contributor workflow covers clean databases, safe demo data, migrations, tests and commits
 - development Compose is clearly separated from the currently unsupported production deployment
 - `AGENTS.md` points LLM-assisted work to supported code paths and deferred architecture

docs/spec/08-current-product-backlog.md

@@ -14,11 +14,11 @@ requirements and intended sequencing, not proof of implementation.
   component model in phased work packages.
 - [x] Phase A: central protection catalog, validation, defaults and pure grouped
   BMK rules.
-- [x] Phase B1: additive relational schema, group backfill, component/protection
+- [x] Phase B1: relational group, component and protection tables with shared
-  tables and shared BMK uniqueness.
+  BMK uniqueness.
-- [x] Phase B2: snapshot/transfer schema upgrade and deterministic compatibility
+- [x] Phase B2: complete snapshot/transfer schema for the supported project
-  mapping.
+  state.
-- [x] Phase C1: versioned new-board command with three groups and fixed header
+- [x] Phase C1: new-board command with three groups and fixed header
   components.
 - [x] Phase C2a1: persistent insert/delete commands for mutable group
   protection and auxiliary components.
@@ -52,22 +52,22 @@ requirements and intended sequencing, not proof of implementation.
 
 ## First Release Baseline
 
-Complete this immediately before the first supported release, once the schema
+The pre-release cleanup established the following compatibility boundary:
-and initial feature set are frozen:
 
-- Decide explicitly whether pre-release databases, portable JSON exports,
+- [x] Pre-release databases, portable JSON exports, logical snapshots and
-  logical snapshots and persisted command histories remain supported.
+  persisted command histories are explicitly unsupported.
-- Create one clean baseline migration that builds the complete release schema
+- [x] Migration `0000` builds the complete supported schema on an empty
-  on an empty database.
+  database.
-- Replace the active development migration chain and Drizzle metadata only if
+- [x] The development migration chain and Drizzle metadata were replaced
-  no released installation depends on it.
+  before any supported release depended on them.
-- Remove upgrade-only database, snapshot and command compatibility code only
+- [x] Upgrade-only database, snapshot and command compatibility paths were
-  for formats that are explicitly declared unsupported.
+  removed.
-- Preserve the pre-release migration history in Git history or a release tag.
+- [x] Pre-cleanup development history remains available through Git history.
-- Verify installation, migrations, application startup and core workflows
+- [x] Clean installation, migration, startup and core workflows were verified
-  against a completely empty database.
+  against an empty database.
-- Mark the resulting compatibility boundary with the first release tag.
+- [ ] Mark this compatibility boundary with the first supported release tag.
-- Treat every migration published after that release as immutable.
+- After that release, every published migration is immutable and later schema
+  changes must use new additive migrations.
 
 ## Project History
 
@@ -109,9 +109,9 @@ and initial feature set are frozen:
   device rows with a valid phase are three-phase.
 - [x] Changing project voltage settings updates all project devices and circuits
   atomically in the same persistent Undo/Redo step.
-- [x] Database migration `0019` and snapshot schema version `5` normalize older
+- [x] Baseline migration `0000` and project-state schema version `1` store only
-  stored values. Version-four and older imports remain supported and are
+  the canonical derived values. Pre-release imports are intentionally
-  normalized while being upgraded.
+  unsupported.
 
 ## Circuit List Power Summary
 

docs/spec/09-distribution-board-components-and-protection-groups.md

@@ -4,9 +4,8 @@
 
 This document records the agreed and implemented behavior for
 distribution-board components, protected circuit groups and circuit
-protection devices. Delivery phases A through E are complete. Phase F retains
+protection devices. Delivery phases A through F are complete. The current
-the final GUI checklist; the current runtime paths are documented in
+runtime paths are documented in `docs/current-architecture.md`.
-`docs/current-architecture.md`.
 
 Full rule-based protection and cable sizing is deliberately deferred. This
 phase establishes the structure and manually selected technical values that a
@@ -34,7 +33,7 @@ later calculation and warning engine will evaluate.
 - channel-level relationships between actors and controlled circuits
 - PostgreSQL or multi-user operation
 
-## Existing Model Audit
+## Implemented Model Boundary
 
 ### Keep
 
@@ -44,33 +43,28 @@ later calculation and warning engine will evaluate.
 - Circuit-level load, cable and control fields remain circuit-owned.
 - Existing stable UUIDs, project revisions, snapshots and persistent Undo/Redo
   remain authoritative.
-- `CircuitSection` remains the migration starting point for a protected circuit
+- `CircuitSection` is the persisted representation of a protected circuit
   group.
 - Grid projection remains separate from persisted domain structure.
 
 ### Change
 
-- A `CircuitSection` gains an explicit category and group number and represents
+- A `CircuitSection` has an explicit category and group number and represents
   one protected circuit group.
-- Circuit protection changes from loosely related flat strings to an explicit
+- Circuit protection uses an explicit
   one-to-one protection-device model.
 - Distribution-board components become independent BMK-bearing list entries.
 - Equipment-identifier uniqueness covers circuits and all distribution-board
   components in the complete circuit list.
 - Moving a circuit to another group of the same category atomically assigns the
   next identifier of the target group.
-- New distribution boards create three default groups rather than treating the
+- New distribution boards create exactly three default groups.
-  optional unassigned compatibility section as a normal fourth group.
 
-### Remove Eventually
+### Remaining Model Cleanup
 
-- hard-coded assumptions that each category has exactly one section
+- The older optional `rcdAssignment` circuit field still exists separately
-- numbering that only understands `prefix + integer`
+  from the explicit group relationship. Removing it requires its own reviewed
-- free-text protection-device combinations that cannot be validated
+  domain and UI change; it is not a compatibility path for pre-release data.
-- `rcdAssignment` as a substitute for an explicit group relationship
-
-Removal happens only after migrated state, snapshots, commands and the editor
-use the replacement model.
 
 ## Target Domain Structure
 
@@ -464,7 +458,7 @@ Every command must:
 - commit the domain mutation, revision and history transition atomically
 - remain undoable and redoable after application restart
 
-## Snapshot and Transfer Compatibility
+## Snapshot and Transfer Boundary
 
 The supported logical project snapshot and portable JSON transfer must include:
 
@@ -473,28 +467,15 @@ The supported logical project snapshot and portable JSON transfer must include:
 - circuit protection-device state
 - all new component relationships and sort positions
 
-Introducing the model requires a snapshot-schema version increase and explicit
+The clean pre-release baseline uses project-state schema version `1`. It
-upgraders for supported older payloads.
+contains the complete supported structure above and is shared by logical
+snapshots, restore, Undo/Redo and portable JSON transfer. Payloads from earlier
+development schemas are intentionally unsupported and rejected before any
+write.
 
-Database migration rules:
+Migration `0000` creates the complete relational model on an empty database.
-
+New defaults apply when boards, groups or circuits are created; they never
-- preserve all existing stable UUIDs
+silently overwrite a planner's later selection.
-- preserve existing circuit equipment identifiers during schema migration
-- map the existing lighting, single-phase and three-phase sections to group 1
-  of the respective category
-- preserve an existing unassigned section only when required by existing data;
-  it is not created for a new distribution board
-- preserve existing flat circuit protection values when creating the new
-  one-to-one protection state
-- do not silently replace an existing protection selection with a new default
-- allow legacy identifiers to remain until an explicit, collision-safe
-  conversion or renumber action is approved
-
-New defaults apply to newly created circuits and boards, not as an implicit
-rewrite of existing planning data.
-
-Historical persisted commands and snapshots that remain in the supported
-compatibility window must still deserialize and execute after the migration.
 
 ## Later Sizing and Warning Engine
 
@@ -544,7 +525,7 @@ Acceptance:
 - invalid rating/type/field combinations are rejected
 - defaults produce the exact agreed values
 
-### B. Persistence and Compatibility Model
+### B. Persistence and Snapshot Model
 
 Status: Complete.
 
@@ -552,44 +533,31 @@ Status: Complete.
 - add distribution-board component persistence
 - add one-to-one circuit protection persistence
 - implement shared BMK uniqueness
-- generate and inspect one additive migration
+- create the complete relational baseline schema
-- add snapshot/transfer schema upgrade
+- include the model in snapshots and portable transfers
-- preserve existing identifiers and protection values
+- preserve identifiers and protection values within supported project state
 
-Implemented in B1:
+Implemented persistence:
 
-- additive migration `0024` adds group identity to circuit sections and maps
+- baseline migration `0000` creates group identity, components and protection
-  the three established sections to group 1 without changing UUIDs
+  state directly for clean installations
 - separate component and circuit/component protection tables preserve the
   one-to-one ownership boundaries
 - a trigger-maintained circuit-list registry rejects normalized BMK collisions
   across circuits and distribution-board components
-- the existing flat circuit protection fields remain untouched until their
+- snapshot schema version `1` includes group identity, distribution-board
-  deterministic snapshot/runtime transition is implemented
-- clean and populated pre-migration databases are covered by migration tests
-- newly created legacy-compatible board structures receive the same initial
-  group identity while their persisted command format remains unchanged
-
-Implemented in B2:
-
-- snapshot schema version 7 includes group identity, distribution-board
   components and both one-to-one protection collections
 - capture, named and automatic snapshots, restore, Undo/Redo and portable JSON
   transfers preserve the complete new relational state
 - duplicate imports remap component UUIDs and both protection-owner references
   together with the existing project structure
-- versions 1 through 6 remain readable; version 6 maps the three established
+- snapshots reject invalid ownership, duplicate group numbers,
-  section keys to group 1 and leaves new collections empty
-- older flat circuit protection values remain present and are not guessed into
-  strict new protection configurations
-- current snapshots reject invalid ownership, duplicate group numbers,
   cross-entity BMKs and invalid protection configurations before persistence
 
 Acceptance:
 
-- a current database migrates without data loss
 - an empty database creates the complete schema
-- old supported snapshots and transfers upgrade deterministically
+- unsupported pre-release snapshots and transfers are rejected before writing
 - BMK collisions across circuits and components are rejected
 
 ### C. Persistent Commands and Board Defaults
@@ -603,14 +571,13 @@ Status: Complete.
 
 Implemented in C1:
 
-- `distribution-board.insert` schema version 3 carries stable UUIDs for three
+- `distribution-board.insert` schema version `1` carries stable UUIDs for three
   initial groups, main switch `-Q0` and surge protective device `-FA`
 - its inverse verifies and removes the unchanged complete structure; Redo
   restores the same UUIDs
 - a late revision/history failure rolls back board, list, groups and components
   together
-- stored schema versions 1 and 2 retain four legacy sections and receive no
+- unsupported command schema versions are rejected
-  invented components
 
 Implemented in C2a1:
 
@@ -819,13 +786,13 @@ checklist are complete.
 Acceptance:
 
 - documentation distinguishes implemented behavior from later sizing
-- clean install and migrated database both work
+- clean installation and baseline migration work
 - snapshots, JSON transfer and Undo/Redo cover all new state
 
 ## Risks and Mitigations
 
-- Mixed legacy and grouped BMKs:
+- Incorrect implicit BMK changes:
-  preserve old identifiers and provide an explicit conversion path.
+  preserve identifiers during sorting and require explicit renumbering.
 - Cross-entity BMK collisions:
   enforce one transaction-level uniqueness boundary for the complete list.
 - Partial destructive writes:
@@ -836,8 +803,9 @@ Acceptance:
   use one shared typed catalog for UI, API and domain validation.
 - Silent planning changes:
   apply defaults only on creation and keep later recommendations explicit.
-- Snapshot incompatibility:
+- Future snapshot evolution:
-  version payloads and test every supported upgrade path.
+  introduce a new explicit schema version and upgrader only after defining its
+  supported compatibility window.
 
 ## Resolved Implementation Decisions
 
@@ -848,6 +816,6 @@ Acceptance:
 - structural component rows remain outside editable-cell filtering and
   spreadsheet navigation; circuit filtering continues to preserve complete
   circuit blocks
-- explicit UI for converting retained legacy identifiers to grouped numbering
+- explicit group renumbering updates grouped identifiers collision-safely
-- whether fixed header components become editable beyond name and BMK in this
+- fixed header components remain read-only; mutable group and auxiliary
-  phase
+  components use their dedicated modals

package.json

@@ -15,14 +15,12 @@
     "build:web": "next build",
     "typecheck:scripts": "tsc --noEmit -p tsconfig.scripts.json",
     "start": "node dist/server/index.js",
-    "test": "tsx --test tests/protection-device.test.ts tests/distribution-board-component.test.ts tests/distribution-board-component-schema-migration.test.ts tests/circuit-group-numbering.test.ts tests/project-device-schema.test.ts tests/project-device-schema-migration.test.ts tests/project-device-placement.service.test.ts tests/project-device-sync.service.test.ts tests/legacy-consumer-migration-planner.test.ts tests/legacy-consumer-migration.service.test.ts tests/legacy-consumer-migration.repository.test.ts tests/circuit-numbering.service.test.ts tests/circuit-power-calculation.test.ts tests/circuit-tree.controller.test.ts tests/circuit-editor-history.test.ts tests/circuit-grid-insertion.test.ts tests/circuit-grid-safety.test.ts tests/circuit-grid-model.test.ts tests/circuit-structure-command.test.ts tests/circuit-device-row-move-command.test.ts tests/circuit-section-reorder-command.test.ts tests/circuit-section-renumber-command.test.ts tests/circuit-grid-projection.test.ts tests/distribution-board-structure-project-command.repository.test.ts tests/project-location-structure-project-command.repository.test.ts tests/project-device-project-command.repository.test.ts tests/project-device-structure-project-command.repository.test.ts tests/project-device-row-sync-project-command.repository.test.ts tests/circuit-section-reorder-project-command.repository.test.ts tests/circuit-section-renumber-project-command.repository.test.ts tests/project-command.model.test.ts tests/project-revision.persistence.test.ts tests/circuit-project-command.repository.test.ts tests/circuit-structure-project-command.repository.test.ts tests/circuit-device-row-project-command.repository.test.ts tests/circuit-device-row-structure-project-command.repository.test.ts tests/circuit-device-row-move-project-command.repository.test.ts tests/project-history.repository.test.ts tests/project-history-timeline.test.ts tests/project-version-history.test.ts tests/project-overview-import.test.ts tests/project-settings-project-command.repository.test.ts tests/project-state-snapshot.test.ts tests/project-snapshot-policy.test.ts tests/project-snapshot.repository.test.ts tests/project-state-restore-command.repository.test.ts tests/project-command.service.test.ts tests/database-backup.test.ts",
+    "test": "node scripts/run-tests.mjs",
-    "test:watch": "tsx --watch --test tests/protection-device.test.ts tests/distribution-board-component.test.ts tests/distribution-board-component-schema-migration.test.ts tests/circuit-group-numbering.test.ts tests/project-device-schema.test.ts tests/project-device-schema-migration.test.ts tests/project-device-placement.service.test.ts tests/project-device-sync.service.test.ts tests/legacy-consumer-migration-planner.test.ts tests/legacy-consumer-migration.service.test.ts tests/legacy-consumer-migration.repository.test.ts tests/circuit-numbering.service.test.ts tests/circuit-power-calculation.test.ts tests/circuit-tree.controller.test.ts tests/circuit-editor-history.test.ts tests/circuit-grid-insertion.test.ts tests/circuit-grid-safety.test.ts tests/circuit-grid-model.test.ts tests/circuit-structure-command.test.ts tests/circuit-device-row-move-command.test.ts tests/circuit-section-reorder-command.test.ts tests/circuit-section-renumber-command.test.ts tests/circuit-grid-projection.test.ts tests/distribution-board-structure-project-command.repository.test.ts tests/project-location-structure-project-command.repository.test.ts tests/project-device-project-command.repository.test.ts tests/project-device-structure-project-command.repository.test.ts tests/project-device-row-sync-project-command.repository.test.ts tests/circuit-section-reorder-project-command.repository.test.ts tests/circuit-section-renumber-project-command.repository.test.ts tests/project-command.model.test.ts tests/project-revision.persistence.test.ts tests/circuit-project-command.repository.test.ts tests/circuit-structure-project-command.repository.test.ts tests/circuit-device-row-project-command.repository.test.ts tests/circuit-device-row-structure-project-command.repository.test.ts tests/circuit-device-row-move-project-command.repository.test.ts tests/project-history.repository.test.ts tests/project-history-timeline.test.ts tests/project-version-history.test.ts tests/project-overview-import.test.ts tests/project-settings-project-command.repository.test.ts tests/project-state-snapshot.test.ts tests/project-snapshot-policy.test.ts tests/project-snapshot.repository.test.ts tests/project-state-restore-command.repository.test.ts tests/project-command.service.test.ts tests/database-backup.test.ts",
+    "test:watch": "node scripts/run-tests.mjs --watch",
     "db:generate": "drizzle-kit generate",
     "db:migrate": "drizzle-kit migrate",
     "db:backup": "tsx scripts/db-backup.ts",
-    "db:verify:circuit-schema": "node scripts/db-verify-circuit-schema.js",
+    "db:verify:circuit-schema": "node scripts/db-verify-circuit-schema.js"
-    "db:backfill:sections": "tsx scripts/db-backfill-sections.ts",
-    "db:migrate:legacy-consumers": "tsx scripts/db-migrate-legacy-consumers.ts"
   },
   "keywords": [],
   "author": "",

scripts/db-backfill-sections.ts

@@ -1,26 +0,0 @@
-import { db } from "../src/db/client.js";
-import { CircuitListRepository } from "../src/db/repositories/circuit-list.repository.js";
-import { CircuitSectionRepository } from "../src/db/repositories/circuit-section.repository.js";
-import { ProjectRepository } from "../src/db/repositories/project.repository.js";
-
-const projectRepository = new ProjectRepository(db);
-const circuitListRepository = new CircuitListRepository(db);
-const circuitSectionRepository = new CircuitSectionRepository(db);
-
-async function run() {
-  const projects = await projectRepository.list();
-  let totalLists = 0;
-  for (const project of projects) {
-    const lists = await circuitListRepository.listByProject(project.id);
-    for (const list of lists) {
-      await circuitSectionRepository.createDefaults(list.id);
-      totalLists += 1;
-    }
-  }
-  console.log(`Section backfill done for ${totalLists} circuit list(s).`);
-}
-
-run().catch((error) => {
-  console.error("Section backfill failed:", error);
-  process.exit(1);
-});

scripts/db-migrate-legacy-consumers.ts

@@ -1,61 +0,0 @@
-import { db } from "../src/db/client.js";
-import { CircuitRepository } from "../src/db/repositories/circuit.repository.js";
-import { CircuitListRepository } from "../src/db/repositories/circuit-list.repository.js";
-import { CircuitSectionRepository } from "../src/db/repositories/circuit-section.repository.js";
-import { LegacyConsumerMigrationRepository } from "../src/db/repositories/legacy-consumer-migration.repository.js";
-import { ProjectRepository } from "../src/db/repositories/project.repository.js";
-import { RoomRepository } from "../src/db/repositories/room.repository.js";
-import { LegacyConsumerMigrationService } from "../src/domain/services/legacy-consumer-migration.service.js";
-
-const projectRepository = new ProjectRepository(db);
-const circuitListRepository = new CircuitListRepository(db);
-const migrationRepository = new LegacyConsumerMigrationRepository(db);
-const migrationService = new LegacyConsumerMigrationService({
-  circuitListReader: circuitListRepository,
-  sectionStore: new CircuitSectionRepository(db),
-  circuitReader: new CircuitRepository(db),
-  roomReader: new RoomRepository(db),
-  migrationStore: migrationRepository,
-});
-
-async function run() {
-  const projects = await projectRepository.list();
-  const reports = [];
-
-  for (const project of projects) {
-    const lists = await circuitListRepository.listByProject(project.id);
-    for (const list of lists) {
-      const report = await migrationService.migrateCircuitList(project.id, list.id);
-      reports.push({
-        projectId: project.id,
-        circuitListId: list.id,
-        legacyConsumerCount: report.legacyConsumerCount,
-        createdCircuitCount: report.createdCircuitCount,
-        createdDeviceRowCount: report.createdDeviceRowCount,
-        generatedIdentifiers: report.generatedIdentifiers.length,
-        unassignedRows: report.unassignedRows.length,
-      });
-    }
-  }
-
-  const unmigratedConsumers =
-    await migrationRepository.listUnmigratedConsumers();
-  if (unmigratedConsumers.length > 0) {
-    const withoutCircuitList = unmigratedConsumers.filter(
-      (consumer) => !consumer.circuitListId
-    ).length;
-    throw new Error(
-      `Cutover verification failed: ${unmigratedConsumers.length} legacy consumer(s) remain unmigrated` +
-        ` (${withoutCircuitList} without a circuit list).`
-    );
-  }
-
-  console.log("Legacy consumer migration summary:");
-  console.table(reports);
-  console.log("Cutover verification passed: all legacy consumers are mapped.");
-}
-
-run().catch((error) => {
-  console.error("Legacy consumer migration failed:", error);
-  process.exit(1);
-});

scripts/db-verify-circuit-schema.js

@@ -12,8 +12,6 @@ const requiredTables = [
   "circuit_protection_devices",
   "distribution_board_components",
   "distribution_board_component_protection_devices",
-  "legacy_consumer_circuit_migrations",
-  "legacy_consumer_migration_reports",
 ];
 
 const tablePlaceholders = requiredTables.map(() => "?").join(", ");
@@ -57,6 +55,14 @@ const circuitColumns = new Set(
   db.prepare("PRAGMA table_info(circuits)").all().map((column) => column.name)
 );
 const missingCircuitColumns = requiredCircuitColumns.filter((name) => !circuitColumns.has(name));
+const removedCircuitColumns = [
+  "protection_type",
+  "protection_rated_current",
+  "protection_characteristic",
+];
+const remainingRemovedCircuitColumns = removedCircuitColumns.filter((name) =>
+  circuitColumns.has(name)
+);
 const requiredCircuitSectionColumns = ["category", "group_number"];
 const circuitSectionColumns = new Set(
   db
@@ -164,6 +170,14 @@ if (missingCircuitColumns.length > 0) {
   process.exit(1);
 }
 
+if (remainingRemovedCircuitColumns.length > 0) {
+  console.error(
+    "Transitional circuit protection columns still present:",
+    remainingRemovedCircuitColumns.join(", ")
+  );
+  process.exit(1);
+}
+
 if (missingCircuitSectionColumns.length > 0) {
   console.error(
     "Missing circuit-section columns:",

scripts/run-tests.mjs

@@ -0,0 +1,30 @@
+import { readdirSync } from "node:fs";
+import { spawnSync } from "node:child_process";
+import path from "node:path";
+
+const testFiles = readdirSync(path.resolve("tests"), {
+  withFileTypes: true,
+})
+  .filter((entry) => entry.isFile() && entry.name.endsWith(".test.ts"))
+  .map((entry) => path.join("tests", entry.name))
+  .sort();
+
+if (testFiles.length === 0) {
+  throw new Error("No TypeScript test files found.");
+}
+
+const watch = process.argv.includes("--watch");
+const result = spawnSync(
+  process.execPath,
+  [
+    "--import",
+    "tsx",
+    "--test",
+    "--test-concurrency=1",
+    ...(watch ? ["--watch"] : []),
+    ...testFiles,
+  ],
+  { stdio: "inherit" }
+);
+
+process.exit(result.status ?? 1);

src/app/globals.css

@@ -305,35 +305,6 @@ a.kpi:hover {
   min-width: 8rem;
 }
 
-.circuit-tree-table .section-row td {
-  background: #e9eef8;
-  border-top: 2px solid #c6d3ea;
-  font-weight: 600;
-}
-
-.circuit-tree-table .summary-row td {
-  background: #f5f8fd;
-  font-weight: 600;
-}
-
-.circuit-tree-table .device-row td {
-  background: #ffffff;
-}
-
-.circuit-tree-table .reserve-row td {
-  background: #f8fbff;
-}
-
-.circuit-tree-table .placeholder-row td {
-  background: #f7f7f7;
-  color: #6c757d;
-  font-style: italic;
-}
-
-.circuit-tree-table .indented-cell {
-  padding-left: 1.5rem;
-}
-
 .tree-editor-shell {
   display: flex;
   flex-direction: column;
@@ -1052,6 +1023,20 @@ a.kpi:hover {
   cursor: text;
 }
 
+.tree-grid .cell-protection-trigger {
+  color: var(--color-primary);
+  cursor: pointer;
+  font-weight: 600;
+  transition:
+    background-color 0.12s ease,
+    box-shadow 0.12s ease;
+}
+
+.tree-grid .cell-protection-trigger:hover {
+  background: #eaf6f0;
+  box-shadow: inset 0 0 0 1px var(--color-signal);
+}
+
 .tree-grid .device-drag-handle {
   cursor: grab;
 }

src/app/projects/[projectId]/circuit-lists/[circuitListId]/tree-edit/page.tsx

@@ -15,12 +15,6 @@ export default function CircuitTreeEditPage() {
           <p className="text-secondary mb-0">Stromkreise und zugeordnete Geräte bearbeiten.</p>
         </div>
         <div className="d-flex gap-2">
-          <Link
-            href={`/projects/${params.projectId}/circuit-lists/${params.circuitListId}/tree`}
-            className="btn btn-outline-secondary btn-sm"
-          >
-            Strukturvorschau
-          </Link>
           <Link href={`/projects/${params.projectId}`} className="btn btn-outline-secondary btn-sm">
             Zum Projekt
           </Link>

src/app/projects/[projectId]/circuit-lists/[circuitListId]/tree/page.tsx

@@ -1,38 +0,0 @@
-"use client";
-
-import Link from "next/link";
-import { useParams } from "next/navigation";
-import { CircuitTreePreview } from "../../../../../../frontend/components/circuit-tree-preview";
-
-export default function CircuitTreePreviewPage() {
-  const params = useParams<{ projectId: string; circuitListId: string }>();
-  const projectId = params.projectId;
-  const circuitListId = params.circuitListId;
-
-  return (
-    <main className="container py-4">
-      <div className="d-flex justify-content-between align-items-center mb-3">
-        <div>
-          <h1 className="h4 mb-1">Vorschau der Stromkreisstruktur</h1>
-          <p className="text-secondary mb-0">
-            Schreibgeschützte Vorschau der Bereiche, Stromkreise und Gerätezeilen.
-          </p>
-        </div>
-        <Link
-          href={`/projects/${projectId}/circuit-lists/${circuitListId}/tree-edit`}
-          className="btn btn-outline-primary btn-sm"
-        >
-          Editor öffnen
-        </Link>
-        <Link
-          href={`/projects/${projectId}`}
-          className="btn btn-outline-secondary btn-sm"
-        >
-          Zum Projekt
-        </Link>
-      </div>
-
-      <CircuitTreePreview projectId={projectId} circuitListId={circuitListId} />
-    </main>
-  );
-}

src/app/projects/[projectId]/page.tsx

@@ -5,12 +5,16 @@ import { useParams } from "next/navigation";
 import { FormEvent, useEffect, useMemo, useState } from "react";
 import {
   copyGlobalDeviceToProject,
+  copyDistributionBoard,
   copyProjectDeviceToGlobal,
   createDistributionBoard,
   createFloor,
   createProjectDevice,
   createRoom,
+  deleteFloor,
   deleteProjectDevice,
+  deleteRoom,
+  deleteDistributionBoard,
   disconnectProjectDeviceRows,
   exportProjectTransfer,
   getProjectDeviceSyncPreview,
@@ -24,8 +28,10 @@ import {
   importProjectTransfer,
   synchronizeProjectDeviceRows,
   updateDistributionBoard,
+  updateFloor,
   updateProjectDevice,
   updateProjectSettings,
+  updateRoom,
 } from "../../../frontend/utils/api";
 import type {
   CircuitListDto,
@@ -91,10 +97,13 @@ export default function ProjectDetailPage() {
     editingBoardSimultaneityFactor,
     setEditingBoardSimultaneityFactor,
   ] = useState("1");
+  const [editingBoardCopyName, setEditingBoardCopyName] = useState("");
   const [floorName, setFloorName] = useState("");
+  const [editingFloor, setEditingFloor] = useState<FloorDto | null>(null);
   const [roomNumber, setRoomNumber] = useState("");
   const [roomName, setRoomName] = useState("");
   const [roomFloorId, setRoomFloorId] = useState("");
+  const [editingRoom, setEditingRoom] = useState<RoomDto | null>(null);
   const [isProjectSettingsOpen, setIsProjectSettingsOpen] = useState(false);
   const [structureModal, setStructureModal] = useState<
     "board" | "floor" | "room" | null
@@ -236,7 +245,7 @@ export default function ProjectDetailPage() {
     }
   }
 
-  async function handleCreateFloor(event: FormEvent<HTMLFormElement>) {
+  async function handleSaveFloor(event: FormEvent<HTMLFormElement>) {
     event.preventDefault();
     if (!projectId || !project || !floorName.trim()) {
       return;
@@ -244,23 +253,37 @@ export default function ProjectDetailPage() {
     setIsSaving(true);
     setError(null);
     try {
-      const result = await createFloor(
+      const result = editingFloor
-        projectId,
+        ? await updateFloor(
-        { name: floorName.trim() },
+            projectId,
-        project.currentRevision
+            editingFloor.id,
+            { name: floorName.trim() },
+            project.currentRevision
+          )
+        : await createFloor(
+            projectId,
+            { name: floorName.trim() },
+            project.currentRevision
+          );
+      setFloors((current) =>
+        editingFloor
+          ? current.map((floor) =>
+              floor.id === result.floor.id ? result.floor : floor
+            )
+          : [...current, result.floor]
       );
-      setFloors((current) => [...current, result.floor]);
       applyProjectRevision(result.history.currentRevision);
       setFloorName("");
+      setEditingFloor(null);
       setStructureModal(null);
     } catch (err) {
-      setError(err instanceof Error ? err.message : "Etage konnte nicht erstellt werden.");
+      setError(err instanceof Error ? err.message : "Etage konnte nicht gespeichert werden.");
     } finally {
       setIsSaving(false);
     }
   }
 
-  async function handleCreateRoom(event: FormEvent<HTMLFormElement>) {
+  async function handleSaveRoom(event: FormEvent<HTMLFormElement>) {
     event.preventDefault();
     if (
       !projectId ||
@@ -273,23 +296,34 @@ export default function ProjectDetailPage() {
     setIsSaving(true);
     setError(null);
     try {
-      const result = await createRoom(
+      const input = {
-        projectId,
+        floorId: roomFloorId || undefined,
-        {
+        roomNumber: roomNumber.trim(),
-          floorId: roomFloorId || undefined,
+        roomName: roomName.trim(),
-          roomNumber: roomNumber.trim(),
+      };
-          roomName: roomName.trim(),
+      const result = editingRoom
-        },
+        ? await updateRoom(
-        project.currentRevision
+            projectId,
+            editingRoom.id,
+            input,
+            project.currentRevision
+          )
+        : await createRoom(projectId, input, project.currentRevision);
+      setRooms((current) =>
+        editingRoom
+          ? current.map((room) =>
+              room.id === result.room.id ? result.room : room
+            )
+          : [...current, result.room]
       );
-      setRooms((current) => [...current, result.room]);
       applyProjectRevision(result.history.currentRevision);
       setRoomNumber("");
       setRoomName("");
       setRoomFloorId("");
+      setEditingRoom(null);
       setStructureModal(null);
     } catch (err) {
-      setError(err instanceof Error ? err.message : "Raum konnte nicht erstellt werden.");
+      setError(err instanceof Error ? err.message : "Raum konnte nicht gespeichert werden.");
     } finally {
       setIsSaving(false);
     }
@@ -405,6 +439,7 @@ export default function ProjectDetailPage() {
     setEditingBoardSimultaneityFactor(
       String(board.simultaneityFactor)
     );
+    setEditingBoardCopyName(`${board.name} Kopie`);
   }
 
   function openBoardCreator() {
@@ -463,6 +498,156 @@ export default function ProjectDetailPage() {
     }
   }
 
+  function openCreateFloor() {
+    setEditingFloor(null);
+    setFloorName("");
+    setStructureModal("floor");
+  }
+
+  function openEditFloor(floor: FloorDto) {
+    setEditingFloor(floor);
+    setFloorName(floor.name);
+    setStructureModal("floor");
+  }
+
+  function openCreateRoom() {
+    setEditingRoom(null);
+    setRoomNumber("");
+    setRoomName("");
+    setRoomFloorId("");
+    setStructureModal("room");
+  }
+
+  function openEditRoom(room: RoomDto) {
+    setEditingRoom(room);
+    setRoomNumber(room.roomNumber);
+    setRoomName(room.roomName);
+    setRoomFloorId(room.floorId ?? "");
+    setStructureModal("room");
+  }
+
+  async function handleDeleteFloor() {
+    if (!projectId || !project || !editingFloor) return;
+    if (!window.confirm(`Etage „${editingFloor.name}“ wirklich löschen?`)) return;
+    setIsSaving(true);
+    setError(null);
+    try {
+      const result = await deleteFloor(projectId, editingFloor.id, project.currentRevision);
+      setFloors((current) => current.filter((floor) => floor.id !== editingFloor.id));
+      applyProjectRevision(result.history.currentRevision);
+      setEditingFloor(null);
+      setFloorName("");
+      setStructureModal(null);
+    } catch (err) {
+      setError(err instanceof Error ? err.message : "Etage konnte nicht gelöscht werden.");
+    } finally {
+      setIsSaving(false);
+    }
+  }
+
+  async function handleDeleteRoom() {
+    if (!projectId || !project || !editingRoom) return;
+    if (!window.confirm(`Raum „${editingRoom.roomNumber} ${editingRoom.roomName}“ wirklich löschen?`)) return;
+    setIsSaving(true);
+    setError(null);
+    try {
+      const result = await deleteRoom(projectId, editingRoom.id, project.currentRevision);
+      setRooms((current) => current.filter((room) => room.id !== editingRoom.id));
+      applyProjectRevision(result.history.currentRevision);
+      setEditingRoom(null);
+      setRoomNumber("");
+      setRoomName("");
+      setRoomFloorId("");
+      setStructureModal(null);
+    } catch (err) {
+      setError(err instanceof Error ? err.message : "Raum konnte nicht gelöscht werden.");
+    } finally {
+      setIsSaving(false);
+    }
+  }
+
+  async function handleCopyBoard() {
+    if (
+      !projectId ||
+      !project ||
+      !editingBoard ||
+      !editingBoardCopyName.trim()
+    ) {
+      return;
+    }
+    setIsSaving(true);
+    setError(null);
+    try {
+      const result = await copyDistributionBoard(
+        projectId,
+        editingBoard.id,
+        editingBoardCopyName.trim(),
+        project.currentRevision
+      );
+      setBoards((current) => [
+        ...current,
+        result.distributionBoard,
+      ]);
+      setCircuitLists((current) => [
+        ...current,
+        result.circuitList,
+      ]);
+      applyProjectRevision(result.history.currentRevision);
+      setEditingBoard(null);
+    } catch (err) {
+      setError(
+        err instanceof Error
+          ? err.message
+          : "Verteilung konnte nicht kopiert werden."
+      );
+    } finally {
+      setIsSaving(false);
+    }
+  }
+
+  async function handleDeleteBoard() {
+    if (!projectId || !project || !editingBoard) {
+      return;
+    }
+    const confirmed = window.confirm(
+      `Verteilung „${editingBoard.name}“ wirklich löschen?\n\n` +
+        "Dabei werden die Stromkreisliste, alle Gruppen, Stromkreise, Gerätezeilen, Schutzgeräte und weiteren Verteilergeräte entfernt. " +
+        "Der Vorgang kann anschließend über die projektweite Historie rückgängig gemacht werden."
+    );
+    if (!confirmed) {
+      return;
+    }
+    setIsSaving(true);
+    setError(null);
+    try {
+      const result = await deleteDistributionBoard(
+        projectId,
+        editingBoard.id,
+        project.currentRevision
+      );
+      setBoards((current) =>
+        current.filter((board) => board.id !== result.distributionBoardId)
+      );
+      setCircuitLists((current) =>
+        current.filter(
+          (circuitList) =>
+            circuitList.distributionBoardId !==
+            result.distributionBoardId
+        )
+      );
+      applyProjectRevision(result.history.currentRevision);
+      setEditingBoard(null);
+    } catch (err) {
+      setError(
+        err instanceof Error
+          ? err.message
+          : "Verteilung konnte nicht gelöscht werden."
+      );
+    } finally {
+      setIsSaving(false);
+    }
+  }
+
   async function handleExportProject() {
     if (!project) {
       return;
@@ -821,7 +1006,7 @@ export default function ProjectDetailPage() {
               </div>
               <button
                 className="btn btn-sm btn-outline-primary"
-                onClick={() => setStructureModal("floor")}
+                onClick={openCreateFloor}
                 type="button"
               >
                 Hinzufügen
@@ -829,8 +1014,11 @@ export default function ProjectDetailPage() {
             </div>
             <ul className="list-group list-group-flush">
               {floors.map((floor) => (
-                <li className="list-group-item" key={floor.id}>
+                <li className="list-group-item d-flex justify-content-between align-items-center gap-2" key={floor.id}>
-                  {floor.name}
+                  <span>{floor.name}</span>
+                  <button className="btn btn-sm btn-outline-secondary" onClick={() => openEditFloor(floor)} type="button">
+                    Bearbeiten
+                  </button>
                 </li>
               ))}
               {!floors.length ? (
@@ -849,7 +1037,7 @@ export default function ProjectDetailPage() {
               </div>
               <button
                 className="btn btn-sm btn-outline-primary"
-                onClick={() => setStructureModal("room")}
+                onClick={openCreateRoom}
                 type="button"
               >
                 Hinzufügen
@@ -862,6 +1050,7 @@ export default function ProjectDetailPage() {
                     <th>Raumnummer</th>
                     <th>Raumname</th>
                     <th>Etage</th>
+                    <th className="text-end">Aktionen</th>
                   </tr>
                 </thead>
                 <tbody>
@@ -870,11 +1059,16 @@ export default function ProjectDetailPage() {
                       <td>{room.roomNumber}</td>
                       <td>{room.roomName}</td>
                       <td>{room.floorId ? floorById.get(room.floorId)?.name ?? "-" : "-"}</td>
+                      <td className="text-end">
+                        <button className="btn btn-sm btn-outline-secondary" onClick={() => openEditRoom(room)} type="button">
+                          Bearbeiten
+                        </button>
+                      </td>
                     </tr>
                   ))}
                   {!rooms.length ? (
                     <tr>
-                      <td colSpan={3} className="text-center text-secondary py-4">
+                      <td colSpan={4} className="text-center text-secondary py-4">
                         Noch keine Räume vorhanden.
                       </td>
                     </tr>
@@ -1111,7 +1305,7 @@ export default function ProjectDetailPage() {
 
       {structureModal === "board" ? (
         <FormModal
-          description="Eine Stromkreisliste mit den vier Standardbereichen wird automatisch angelegt."
+          description="Eine Stromkreisliste mit den drei Standardgruppen wird automatisch angelegt."
           isSaving={isSaving}
           onClose={() => setStructureModal(null)}
           onSubmit={handleCreateBoard}
@@ -1271,17 +1465,89 @@ export default function ProjectDetailPage() {
               </div>
             </div>
           </div>
+          <hr className="my-4" />
+          <section aria-labelledby="copy-distribution-board-heading">
+            <h3
+              className="h6"
+              id="copy-distribution-board-heading"
+            >
+              Verteilung kopieren
+            </h3>
+            <p className="text-secondary small">
+              Erstellt eine vollständige Kopie des zuletzt gespeicherten
+              Stands einschließlich Gruppen, Stromkreisen, Gerätezeilen und
+              Schutzgeräten. Noch nicht gespeicherte Änderungen oben werden
+              nicht übernommen.
+            </p>
+            <div className="row g-2 align-items-end">
+              <div className="col-12 col-md">
+                <label
+                  className="form-label"
+                  htmlFor="copy-distribution-board-name"
+                >
+                  Bezeichnung der Kopie
+                </label>
+                <input
+                  className="form-control"
+                  id="copy-distribution-board-name"
+                  maxLength={200}
+                  onChange={(event) =>
+                    setEditingBoardCopyName(event.target.value)
+                  }
+                  value={editingBoardCopyName}
+                />
+              </div>
+              <div className="col-12 col-md-auto">
+                <button
+                  className="btn btn-outline-primary"
+                  disabled={isSaving || !editingBoardCopyName.trim()}
+                  onClick={() => void handleCopyBoard()}
+                  type="button"
+                >
+                  Verteilung kopieren
+                </button>
+              </div>
+            </div>
+          </section>
+          <hr className="my-4" />
+          <section
+            aria-labelledby="delete-distribution-board-heading"
+            className="border border-danger-subtle rounded p-3"
+          >
+            <h3
+              className="h6 text-danger"
+              id="delete-distribution-board-heading"
+            >
+              Gefahrenbereich
+            </h3>
+            <p className="text-secondary small mb-3">
+              Entfernt die vollständige Verteilung. Die Aktion wird erst
+              nach einer ausdrücklichen Warnung ausgeführt und kann über die
+              projektweite Historie rückgängig gemacht werden.
+            </p>
+            <button
+              className="btn btn-outline-danger"
+              disabled={isSaving}
+              onClick={() => void handleDeleteBoard()}
+              type="button"
+            >
+              Verteilung löschen
+            </button>
+          </section>
         </FormModal>
       ) : null}
 
       {structureModal === "floor" ? (
         <FormModal
           isSaving={isSaving}
-          onClose={() => setStructureModal(null)}
+          onClose={() => {
-          onSubmit={handleCreateFloor}
+            setStructureModal(null);
+            setEditingFloor(null);
+          }}
+          onSubmit={handleSaveFloor}
           submitDisabled={!floorName.trim()}
-          submitLabel="Etage hinzufügen"
+          submitLabel={editingFloor ? "Änderungen speichern" : "Etage hinzufügen"}
-          title="Etage hinzufügen"
+          title={editingFloor ? "Etage bearbeiten" : "Etage hinzufügen"}
         >
           <label className="form-label" htmlFor="floor-name">
             Bezeichnung
@@ -1295,17 +1561,30 @@ export default function ProjectDetailPage() {
             required
             value={floorName}
           />
+          {editingFloor ? (
+            <div className="border-top mt-4 pt-3">
+              <p className="text-secondary small mb-2">
+                Etagen mit zugeordneten Räumen oder Verteilungen können nicht gelöscht werden.
+              </p>
+              <button className="btn btn-outline-danger" disabled={isSaving} onClick={() => void handleDeleteFloor()} type="button">
+                Etage löschen
+              </button>
+            </div>
+          ) : null}
         </FormModal>
       ) : null}
 
       {structureModal === "room" ? (
         <FormModal
           isSaving={isSaving}
-          onClose={() => setStructureModal(null)}
+          onClose={() => {
-          onSubmit={handleCreateRoom}
+            setStructureModal(null);
+            setEditingRoom(null);
+          }}
+          onSubmit={handleSaveRoom}
           submitDisabled={!roomNumber.trim() || !roomName.trim()}
-          submitLabel="Raum anlegen"
+          submitLabel={editingRoom ? "Änderungen speichern" : "Raum anlegen"}
-          title="Raum hinzufügen"
+          title={editingRoom ? "Raum bearbeiten" : "Raum hinzufügen"}
         >
           <div className="row g-3">
             <div className="col-12 col-md-4">
@@ -1352,6 +1631,16 @@ export default function ProjectDetailPage() {
               </select>
             </div>
           </div>
+          {editingRoom ? (
+            <div className="border-top mt-4 pt-3">
+              <p className="text-secondary small mb-2">
+                In Stromkreisen verwendete Räume können nicht gelöscht werden.
+              </p>
+              <button className="btn btn-outline-danger" disabled={isSaving} onClick={() => void handleDeleteRoom()} type="button">
+                Raum löschen
+              </button>
+            </div>
+          ) : null}
         </FormModal>
       ) : null}
 

src/db/migrations/0000_bizarre_colossus.sql

@@ -1,28 +0,0 @@
-CREATE TABLE `consumers` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`distribution_board_id` text,
-	`name` text NOT NULL,
-	`category` text,
-	`quantity` integer NOT NULL,
-	`installed_power_per_unit_kw` real NOT NULL,
-	`demand_factor` real NOT NULL,
-	`voltage_v` real,
-	`phase_count` integer,
-	`power_factor` real,
-	`note` text,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`distribution_board_id`) REFERENCES `distribution_boards`(`id`) ON UPDATE no action ON DELETE set null
-);
---> statement-breakpoint
-CREATE TABLE `distribution_boards` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`name` text NOT NULL,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE TABLE `projects` (
-	`id` text PRIMARY KEY NOT NULL,
-	`name` text NOT NULL
-);

src/db/migrations/0000_whole_surge.sql

@@ -0,0 +1,300 @@
+CREATE TABLE `circuit_device_rows` (
+	`id` text PRIMARY KEY NOT NULL,
+	`circuit_id` text NOT NULL,
+	`linked_project_device_id` text,
+	`sort_order` integer DEFAULT 0 NOT NULL,
+	`name` text NOT NULL,
+	`display_name` text NOT NULL,
+	`phase_type` text,
+	`connection_kind` text,
+	`cost_group` text,
+	`category` text,
+	`level` text,
+	`room_id` text,
+	`room_number_snapshot` text,
+	`room_name_snapshot` text,
+	`quantity` integer NOT NULL,
+	`power_per_unit` real NOT NULL,
+	`simultaneity_factor` real NOT NULL,
+	`cos_phi` real,
+	`remark` text,
+	`overridden_fields` text,
+	FOREIGN KEY (`circuit_id`) REFERENCES `circuits`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`linked_project_device_id`) REFERENCES `project_devices`(`id`) ON UPDATE no action ON DELETE set null,
+	FOREIGN KEY (`room_id`) REFERENCES `rooms`(`id`) ON UPDATE no action ON DELETE set null
+);
+--> statement-breakpoint
+CREATE TABLE `circuit_list_equipment_identifiers` (
+	`owner_type` text NOT NULL,
+	`owner_id` text NOT NULL,
+	`circuit_list_id` text NOT NULL,
+	`equipment_identifier` text NOT NULL,
+	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_list_equipment_identifiers_owner_unique` ON `circuit_list_equipment_identifiers` (`owner_type`,`owner_id`);--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_list_equipment_identifiers_list_identifier_unique` ON `circuit_list_equipment_identifiers` (`circuit_list_id`,`equipment_identifier`);--> statement-breakpoint
+CREATE TABLE `circuit_lists` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`distribution_board_id` text NOT NULL,
+	`name` text NOT NULL,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`distribution_board_id`) REFERENCES `distribution_boards`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_lists_distribution_board_id_unique` ON `circuit_lists` (`distribution_board_id`);--> statement-breakpoint
+CREATE TABLE `circuit_protection_devices` (
+	`circuit_id` text PRIMARY KEY NOT NULL,
+	`type` text NOT NULL,
+	`rated_current_a` real NOT NULL,
+	`fuse_utilization_category` text,
+	`trip_characteristic` text,
+	`rcd_type` text,
+	`rated_residual_current_ma` real,
+	FOREIGN KEY (`circuit_id`) REFERENCES `circuits`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE TABLE `circuit_sections` (
+	`id` text PRIMARY KEY NOT NULL,
+	`circuit_list_id` text NOT NULL,
+	`key` text NOT NULL,
+	`display_name` text NOT NULL,
+	`prefix` text NOT NULL,
+	`sort_order` integer DEFAULT 0 NOT NULL,
+	`category` text,
+	`group_number` integer,
+	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_sections_list_key_unique` ON `circuit_sections` (`circuit_list_id`,`key`);--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_sections_list_prefix_unique` ON `circuit_sections` (`circuit_list_id`,`prefix`);--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_sections_list_category_group_unique` ON `circuit_sections` (`circuit_list_id`,`category`,`group_number`);--> statement-breakpoint
+CREATE TABLE `circuits` (
+	`id` text PRIMARY KEY NOT NULL,
+	`circuit_list_id` text NOT NULL,
+	`section_id` text NOT NULL,
+	`equipment_identifier` text NOT NULL,
+	`display_name` text,
+	`sort_order` integer DEFAULT 0 NOT NULL,
+	`cable_type` text,
+	`cable_cross_section` text,
+	`cable_length` real,
+	`rcd_assignment` text,
+	`terminal_designation` text,
+	`voltage` real,
+	`control_requirement` text,
+	`status` text,
+	`is_reserve` integer DEFAULT 0 NOT NULL,
+	`remark` text,
+	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`section_id`) REFERENCES `circuit_sections`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `circuits_list_equipment_identifier_unique` ON `circuits` (`circuit_list_id`,`equipment_identifier`);--> statement-breakpoint
+CREATE TABLE `distribution_board_component_protection_devices` (
+	`component_id` text PRIMARY KEY NOT NULL,
+	`type` text NOT NULL,
+	`rated_current_a` real NOT NULL,
+	`fuse_utilization_category` text,
+	`trip_characteristic` text,
+	`rcd_type` text,
+	`rated_residual_current_ma` real,
+	FOREIGN KEY (`component_id`) REFERENCES `distribution_board_components`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE TABLE `distribution_board_components` (
+	`id` text PRIMARY KEY NOT NULL,
+	`circuit_list_id` text NOT NULL,
+	`section_id` text,
+	`equipment_identifier` text NOT NULL,
+	`name` text NOT NULL,
+	`role` text NOT NULL,
+	`placement` text NOT NULL,
+	`sort_order` integer DEFAULT 0 NOT NULL,
+	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`section_id`) REFERENCES `circuit_sections`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `distribution_board_components_list_identifier_unique` ON `distribution_board_components` (`circuit_list_id`,`equipment_identifier`);--> statement-breakpoint
+CREATE UNIQUE INDEX `distribution_board_components_section_role_unique` ON `distribution_board_components` (`section_id`,`role`);--> statement-breakpoint
+CREATE TABLE `distribution_boards` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`name` text NOT NULL,
+	`floor_id` text,
+	`supply_type` text,
+	`simultaneity_factor` real DEFAULT 1 NOT NULL,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`floor_id`) REFERENCES `floors`(`id`) ON UPDATE no action ON DELETE set null
+);
+--> statement-breakpoint
+CREATE TABLE `floors` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`name` text NOT NULL,
+	`sort_order` integer DEFAULT 0 NOT NULL,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE TABLE `global_devices` (
+	`id` text PRIMARY KEY NOT NULL,
+	`name` text NOT NULL,
+	`display_name` text NOT NULL,
+	`category` text,
+	`quantity` integer NOT NULL,
+	`installed_power_per_unit_kw` real NOT NULL,
+	`demand_factor` real NOT NULL,
+	`voltage_v` real,
+	`phase_count` integer,
+	`power_factor` real,
+	`note` text
+);
+--> statement-breakpoint
+CREATE TABLE `project_change_sets` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_revision_id` text NOT NULL,
+	`command_type` text NOT NULL,
+	`payload_schema_version` integer NOT NULL,
+	`forward_payload_json` text NOT NULL,
+	`inverse_payload_json` text NOT NULL,
+	FOREIGN KEY (`project_revision_id`) REFERENCES `project_revisions`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `project_change_sets_revision_unique` ON `project_change_sets` (`project_revision_id`);--> statement-breakpoint
+CREATE TABLE `project_devices` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`name` text NOT NULL,
+	`display_name` text NOT NULL,
+	`phase_type` text DEFAULT 'single_phase' NOT NULL,
+	`connection_kind` text,
+	`cost_group` text,
+	`category` text,
+	`quantity` integer NOT NULL,
+	`power_per_unit` real DEFAULT 0 NOT NULL,
+	`simultaneity_factor` real DEFAULT 1 NOT NULL,
+	`cos_phi` real,
+	`remark` text,
+	`voltage_v` real,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE TABLE `project_history_stack_entries` (
+	`change_set_id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`stack` text NOT NULL,
+	`position` integer NOT NULL,
+	FOREIGN KEY (`change_set_id`) REFERENCES `project_change_sets`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
+	CONSTRAINT "project_history_stack_entries_stack_check" CHECK("project_history_stack_entries"."stack" in ('undo', 'redo'))
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `project_history_stack_entries_position_unique` ON `project_history_stack_entries` (`project_id`,`stack`,`position`);--> statement-breakpoint
+CREATE TABLE `project_revisions` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`revision_number` integer NOT NULL,
+	`created_at_iso` text NOT NULL,
+	`actor_id` text,
+	`source` text NOT NULL,
+	`description` text,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `project_revisions_project_number_unique` ON `project_revisions` (`project_id`,`revision_number`);--> statement-breakpoint
+CREATE TABLE `project_snapshots` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`source_revision` integer NOT NULL,
+	`schema_version` integer NOT NULL,
+	`kind` text DEFAULT 'named' NOT NULL,
+	`name` text NOT NULL,
+	`description` text,
+	`payload_json` text NOT NULL,
+	`payload_sha256` text NOT NULL,
+	`created_at_iso` text NOT NULL,
+	`created_by_actor_id` text,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
+);
+--> statement-breakpoint
+CREATE INDEX `project_snapshots_project_created_idx` ON `project_snapshots` (`project_id`,`created_at_iso`);--> statement-breakpoint
+CREATE INDEX `project_snapshots_project_kind_revision_idx` ON `project_snapshots` (`project_id`,`kind`,`source_revision`);--> statement-breakpoint
+CREATE UNIQUE INDEX `project_snapshots_project_name_unique` ON `project_snapshots` (`project_id`,`name`);--> statement-breakpoint
+CREATE TABLE `projects` (
+	`id` text PRIMARY KEY NOT NULL,
+	`name` text NOT NULL,
+	`internal_project_number` text,
+	`external_project_number` text,
+	`building_owner` text,
+	`description` text,
+	`single_phase_voltage_v` integer DEFAULT 230 NOT NULL,
+	`three_phase_voltage_v` integer DEFAULT 400 NOT NULL,
+	`enabled_distribution_board_supply_types` text DEFAULT '["AV","SV","EV","USV","MSR","SiBe"]' NOT NULL,
+	`current_revision` integer DEFAULT 0 NOT NULL
+);
+--> statement-breakpoint
+CREATE TABLE `rooms` (
+	`id` text PRIMARY KEY NOT NULL,
+	`project_id` text NOT NULL,
+	`floor_id` text,
+	`room_number` text NOT NULL,
+	`room_name` text NOT NULL,
+	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
+	FOREIGN KEY (`floor_id`) REFERENCES `floors`(`id`) ON UPDATE no action ON DELETE set null
+);
+--> statement-breakpoint
+CREATE UNIQUE INDEX `circuit_list_equipment_identifiers_normalized_unique`
+ON `circuit_list_equipment_identifiers` (`circuit_list_id`, lower(trim(`equipment_identifier`)));
+--> statement-breakpoint
+CREATE UNIQUE INDEX `distribution_board_components_fixed_role_unique`
+ON `distribution_board_components` (`circuit_list_id`, `role`)
+WHERE `role` IN ('main_switch', 'surge_protective_device');
+--> statement-breakpoint
+CREATE TRIGGER `circuits_equipment_identifier_insert`
+AFTER INSERT ON `circuits`
+BEGIN
+	INSERT INTO `circuit_list_equipment_identifiers`
+		(`owner_type`, `owner_id`, `circuit_list_id`, `equipment_identifier`)
+	VALUES ('circuit', NEW.`id`, NEW.`circuit_list_id`, NEW.`equipment_identifier`);
+END;
+--> statement-breakpoint
+CREATE TRIGGER `circuits_equipment_identifier_update`
+AFTER UPDATE OF `circuit_list_id`, `equipment_identifier` ON `circuits`
+BEGIN
+	UPDATE `circuit_list_equipment_identifiers`
+	SET `circuit_list_id` = NEW.`circuit_list_id`,
+		`equipment_identifier` = NEW.`equipment_identifier`
+	WHERE `owner_type` = 'circuit' AND `owner_id` = OLD.`id`;
+END;
+--> statement-breakpoint
+CREATE TRIGGER `circuits_equipment_identifier_delete`
+AFTER DELETE ON `circuits`
+BEGIN
+	DELETE FROM `circuit_list_equipment_identifiers`
+	WHERE `owner_type` = 'circuit' AND `owner_id` = OLD.`id`;
+END;
+--> statement-breakpoint
+CREATE TRIGGER `distribution_board_components_equipment_identifier_insert`
+AFTER INSERT ON `distribution_board_components`
+BEGIN
+	INSERT INTO `circuit_list_equipment_identifiers`
+		(`owner_type`, `owner_id`, `circuit_list_id`, `equipment_identifier`)
+	VALUES ('distribution_board_component', NEW.`id`, NEW.`circuit_list_id`, NEW.`equipment_identifier`);
+END;
+--> statement-breakpoint
+CREATE TRIGGER `distribution_board_components_equipment_identifier_update`
+AFTER UPDATE OF `circuit_list_id`, `equipment_identifier` ON `distribution_board_components`
+BEGIN
+	UPDATE `circuit_list_equipment_identifiers`
+	SET `circuit_list_id` = NEW.`circuit_list_id`,
+		`equipment_identifier` = NEW.`equipment_identifier`
+	WHERE `owner_type` = 'distribution_board_component' AND `owner_id` = OLD.`id`;
+END;
+--> statement-breakpoint
+CREATE TRIGGER `distribution_board_components_equipment_identifier_delete`
+AFTER DELETE ON `distribution_board_components`
+BEGIN
+	DELETE FROM `circuit_list_equipment_identifiers`
+	WHERE `owner_type` = 'distribution_board_component' AND `owner_id` = OLD.`id`;
+END;

src/db/migrations/0001_global_devices.sql

@@ -1,12 +0,0 @@
-CREATE TABLE `global_devices` (
-	`id` text PRIMARY KEY NOT NULL,
-	`name` text NOT NULL,
-	`category` text,
-	`quantity` integer NOT NULL,
-	`installed_power_per_unit_kw` real NOT NULL,
-	`demand_factor` real NOT NULL,
-	`voltage_v` real,
-	`phase_count` integer,
-	`power_factor` real,
-	`note` text
-);

src/db/migrations/0002_project_voltage_defaults.sql

@@ -1,3 +0,0 @@
-ALTER TABLE `projects` ADD COLUMN `single_phase_voltage_v` integer NOT NULL DEFAULT 230;
---> statement-breakpoint
-ALTER TABLE `projects` ADD COLUMN `three_phase_voltage_v` integer NOT NULL DEFAULT 400;

src/db/migrations/0003_project_floors_rooms.sql

@@ -1,19 +0,0 @@
-CREATE TABLE `floors` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`name` text NOT NULL,
-	`sort_order` integer NOT NULL DEFAULT 0,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE TABLE `rooms` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`floor_id` text,
-	`room_number` text NOT NULL,
-	`room_name` text NOT NULL,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`floor_id`) REFERENCES `floors`(`id`) ON UPDATE no action ON DELETE set null
-);
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `room_id` text REFERENCES `rooms`(`id`) ON UPDATE no action ON DELETE set null;

src/db/migrations/0004_circuit_lists_and_entry_fields.sql

@@ -1,44 +0,0 @@
-CREATE TABLE `circuit_lists` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`distribution_board_id` text NOT NULL,
-	`name` text NOT NULL,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`distribution_board_id`) REFERENCES `distribution_boards`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_lists_distribution_board_id_unique` ON `circuit_lists` (`distribution_board_id`);
---> statement-breakpoint
-INSERT INTO `circuit_lists` (`id`, `project_id`, `distribution_board_id`, `name`)
-SELECT `id`, `project_id`, `id`, `name` || ' Stromkreisliste'
-FROM `distribution_boards`;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `circuit_list_id` text REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE set null;
---> statement-breakpoint
-UPDATE `consumers` SET `circuit_list_id` = `distribution_board_id` WHERE `distribution_board_id` IS NOT NULL;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `circuit_number` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `description` text;
---> statement-breakpoint
-UPDATE `consumers` SET `description` = `name` WHERE `description` IS NULL;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `device_type` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `phase_type` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `trade_or_cost_group` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `group_name` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `protection_type` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `protection_rated_current` real;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `protection_characteristic` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `cable_type` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `cable_cross_section` text;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `comment` text;

src/db/migrations/0005_project_devices.sql

@@ -1,14 +0,0 @@
-CREATE TABLE `project_devices` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`name` text NOT NULL,
-	`category` text,
-	`quantity` integer NOT NULL,
-	`installed_power_per_unit_kw` real NOT NULL,
-	`demand_factor` real NOT NULL,
-	`voltage_v` real,
-	`phase_count` integer,
-	`power_factor` real,
-	`note` text,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
-);

src/db/migrations/0006_device_display_name.sql

@@ -1,7 +0,0 @@
-ALTER TABLE `global_devices` ADD COLUMN `display_name` text;
---> statement-breakpoint
-UPDATE `global_devices` SET `display_name` = `name` WHERE `display_name` IS NULL;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `display_name` text;
---> statement-breakpoint
-UPDATE `project_devices` SET `display_name` = `name` WHERE `display_name` IS NULL;

src/db/migrations/0007_consumer_device_link.sql

@@ -1,3 +0,0 @@
-ALTER TABLE `consumers` ADD COLUMN `project_device_id` text REFERENCES `project_devices`(`id`) ON UPDATE no action ON DELETE set null;
---> statement-breakpoint
-ALTER TABLE `consumers` ADD COLUMN `is_linked_to_device` integer NOT NULL DEFAULT 0;

src/db/migrations/0008_circuit_first_model.sql

@@ -1,99 +0,0 @@
-CREATE TABLE `circuit_sections` (
-	`id` text PRIMARY KEY NOT NULL,
-	`circuit_list_id` text NOT NULL,
-	`key` text NOT NULL,
-	`display_name` text NOT NULL,
-	`prefix` text NOT NULL,
-	`sort_order` integer NOT NULL DEFAULT 0,
-	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_sections_list_key_unique` ON `circuit_sections` (`circuit_list_id`,`key`);
---> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_sections_list_prefix_unique` ON `circuit_sections` (`circuit_list_id`,`prefix`);
---> statement-breakpoint
-
-CREATE TABLE `circuits` (
-	`id` text PRIMARY KEY NOT NULL,
-	`circuit_list_id` text NOT NULL,
-	`section_id` text NOT NULL,
-	`equipment_identifier` text NOT NULL,
-	`display_name` text,
-	`sort_order` integer NOT NULL DEFAULT 0,
-	`protection_type` text,
-	`protection_rated_current` real,
-	`protection_characteristic` text,
-	`cable_type` text,
-	`cable_cross_section` text,
-	`cable_length` real,
-	`rcd_assignment` text,
-	`terminal_designation` text,
-	`voltage` real,
-	`status` text,
-	`is_reserve` integer NOT NULL DEFAULT 0,
-	`remark` text,
-	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`section_id`) REFERENCES `circuit_sections`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `circuits_list_equipment_identifier_unique` ON `circuits` (`circuit_list_id`,`equipment_identifier`);
---> statement-breakpoint
-
-CREATE TABLE `circuit_device_rows` (
-	`id` text PRIMARY KEY NOT NULL,
-	`circuit_id` text NOT NULL,
-	`linked_project_device_id` text,
-	`legacy_consumer_id` text,
-	`sort_order` integer NOT NULL DEFAULT 0,
-	`name` text NOT NULL,
-	`display_name` text NOT NULL,
-	`phase_type` text,
-	`connection_kind` text,
-	`cost_group` text,
-	`category` text,
-	`level` text,
-	`room_id` text,
-	`room_number_snapshot` text,
-	`room_name_snapshot` text,
-	`quantity` integer NOT NULL,
-	`power_per_unit` real NOT NULL,
-	`simultaneity_factor` real NOT NULL,
-	`cos_phi` real,
-	`remark` text,
-	`overridden_fields` text,
-	FOREIGN KEY (`circuit_id`) REFERENCES `circuits`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`linked_project_device_id`) REFERENCES `project_devices`(`id`) ON UPDATE no action ON DELETE set null,
-	FOREIGN KEY (`room_id`) REFERENCES `rooms`(`id`) ON UPDATE no action ON DELETE set null
-);
---> statement-breakpoint
-
-CREATE TABLE `legacy_consumer_circuit_migrations` (
-	`consumer_id` text PRIMARY KEY NOT NULL,
-	`circuit_id` text NOT NULL,
-	`circuit_device_row_id` text NOT NULL,
-	`circuit_list_id` text NOT NULL,
-	`created_at_iso` text NOT NULL,
-	FOREIGN KEY (`circuit_id`) REFERENCES `circuits`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`circuit_device_row_id`) REFERENCES `circuit_device_rows`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-
-CREATE TABLE `legacy_consumer_migration_reports` (
-	`id` text PRIMARY KEY NOT NULL,
-	`circuit_list_id` text NOT NULL,
-	`legacy_consumer_count` integer NOT NULL,
-	`created_circuit_count` integer NOT NULL,
-	`created_device_row_count` integer NOT NULL,
-	`duplicate_grouped_count` integer NOT NULL,
-	`generated_identifier_count` integer NOT NULL,
-	`unassigned_row_count` integer NOT NULL,
-	`warnings_json` text NOT NULL,
-	`generated_identifiers_json` text NOT NULL,
-	`duplicate_groups_json` text NOT NULL,
-	`created_at_iso` text NOT NULL,
-	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `legacy_consumer_migration_reports_list_unique` ON `legacy_consumer_migration_reports` (`circuit_list_id`);
-

src/db/migrations/0009_project_device_circuit_fields.sql

@@ -1,24 +0,0 @@
-ALTER TABLE `project_devices` ADD COLUMN `phase_type` text NOT NULL DEFAULT 'single_phase';
---> statement-breakpoint
-UPDATE `project_devices`
-SET `phase_type` = CASE WHEN `phase_count` = 3 THEN 'three_phase' ELSE 'single_phase' END;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `connection_kind` text;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `cost_group` text;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `power_per_unit` real NOT NULL DEFAULT 0;
---> statement-breakpoint
-UPDATE `project_devices` SET `power_per_unit` = `installed_power_per_unit_kw`;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `simultaneity_factor` real NOT NULL DEFAULT 1;
---> statement-breakpoint
-UPDATE `project_devices` SET `simultaneity_factor` = `demand_factor`;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `cos_phi` real;
---> statement-breakpoint
-UPDATE `project_devices` SET `cos_phi` = `power_factor`;
---> statement-breakpoint
-ALTER TABLE `project_devices` ADD COLUMN `remark` text;
---> statement-breakpoint
-UPDATE `project_devices` SET `remark` = `note`;

src/db/migrations/0010_circuit_control_requirement.sql

@@ -1 +0,0 @@
-ALTER TABLE `circuits` ADD COLUMN `control_requirement` text;

src/db/migrations/0011_project_device_canonical_fields.sql

@@ -1,9 +0,0 @@
-ALTER TABLE `project_devices` DROP COLUMN `installed_power_per_unit_kw`;
---> statement-breakpoint
-ALTER TABLE `project_devices` DROP COLUMN `demand_factor`;
---> statement-breakpoint
-ALTER TABLE `project_devices` DROP COLUMN `phase_count`;
---> statement-breakpoint
-ALTER TABLE `project_devices` DROP COLUMN `power_factor`;
---> statement-breakpoint
-ALTER TABLE `project_devices` DROP COLUMN `note`;

src/db/migrations/0012_project_revision_foundation.sql

@@ -1,24 +0,0 @@
-CREATE TABLE `project_change_sets` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_revision_id` text NOT NULL,
-	`command_type` text NOT NULL,
-	`payload_schema_version` integer NOT NULL,
-	`forward_payload_json` text NOT NULL,
-	`inverse_payload_json` text NOT NULL,
-	FOREIGN KEY (`project_revision_id`) REFERENCES `project_revisions`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `project_change_sets_revision_unique` ON `project_change_sets` (`project_revision_id`);--> statement-breakpoint
-CREATE TABLE `project_revisions` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`revision_number` integer NOT NULL,
-	`created_at_iso` text NOT NULL,
-	`actor_id` text,
-	`source` text NOT NULL,
-	`description` text,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `project_revisions_project_number_unique` ON `project_revisions` (`project_id`,`revision_number`);--> statement-breakpoint
-ALTER TABLE `projects` ADD `current_revision` integer DEFAULT 0 NOT NULL;

src/db/migrations/0013_project_history_stacks.sql

@@ -1,11 +0,0 @@
-CREATE TABLE `project_history_stack_entries` (
-	`change_set_id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`stack` text NOT NULL,
-	`position` integer NOT NULL,
-	FOREIGN KEY (`change_set_id`) REFERENCES `project_change_sets`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade,
-	CONSTRAINT "project_history_stack_entries_stack_check" CHECK("project_history_stack_entries"."stack" in ('undo', 'redo'))
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `project_history_stack_entries_position_unique` ON `project_history_stack_entries` (`project_id`,`stack`,`position`);

src/db/migrations/0014_project_snapshots.sql

@@ -1,16 +0,0 @@
-CREATE TABLE `project_snapshots` (
-	`id` text PRIMARY KEY NOT NULL,
-	`project_id` text NOT NULL,
-	`source_revision` integer NOT NULL,
-	`schema_version` integer NOT NULL,
-	`name` text NOT NULL,
-	`description` text,
-	`payload_json` text NOT NULL,
-	`payload_sha256` text NOT NULL,
-	`created_at_iso` text NOT NULL,
-	`created_by_actor_id` text,
-	FOREIGN KEY (`project_id`) REFERENCES `projects`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE INDEX `project_snapshots_project_created_idx` ON `project_snapshots` (`project_id`,`created_at_iso`);--> statement-breakpoint
-CREATE UNIQUE INDEX `project_snapshots_project_name_unique` ON `project_snapshots` (`project_id`,`name`);

src/db/migrations/0015_modern_madame_masque.sql

@@ -1,2 +0,0 @@
-ALTER TABLE `project_snapshots` ADD `kind` text DEFAULT 'named' NOT NULL;--> statement-breakpoint
-CREATE INDEX `project_snapshots_project_kind_revision_idx` ON `project_snapshots` (`project_id`,`kind`,`source_revision`);

src/db/migrations/0016_dashing_darkstar.sql

@@ -1,4 +0,0 @@
-ALTER TABLE `projects` ADD `internal_project_number` text;--> statement-breakpoint
-ALTER TABLE `projects` ADD `external_project_number` text;--> statement-breakpoint
-ALTER TABLE `projects` ADD `building_owner` text;--> statement-breakpoint
-ALTER TABLE `projects` ADD `description` text;

src/db/migrations/0017_vengeful_romulus.sql

@@ -1,2 +0,0 @@
-ALTER TABLE `distribution_boards` ADD `floor_id` text REFERENCES floors(id);--> statement-breakpoint
-ALTER TABLE `distribution_boards` ADD `supply_type` text;

src/db/migrations/0018_fancy_argent.sql

@@ -1 +0,0 @@
-ALTER TABLE `projects` ADD `enabled_distribution_board_supply_types` text DEFAULT '["AV","SV","EV","USV","MSR","SiBe"]' NOT NULL;

src/db/migrations/0019_normalize_project_voltages.sql

@@ -1,48 +0,0 @@
-UPDATE `global_devices`
-SET `voltage_v` = NULL;
---> statement-breakpoint
-UPDATE `project_devices` AS `pd`
-SET `voltage_v` = CASE
-  WHEN `pd`.`phase_type` = 'three_phase' THEN `p`.`three_phase_voltage_v`
-  ELSE `p`.`single_phase_voltage_v`
-END
-FROM `projects` AS `p`
-WHERE `p`.`id` = `pd`.`project_id`;
---> statement-breakpoint
-WITH `derived_circuit_voltages` AS (
-  SELECT
-    `c`.`id` AS `circuit_id`,
-    CASE
-      WHEN `cs`.`key` = 'three_phase' THEN `p`.`three_phase_voltage_v`
-      WHEN `cs`.`key` IN ('lighting', 'single_phase') THEN `p`.`single_phase_voltage_v`
-      WHEN EXISTS (
-        SELECT 1
-        FROM `circuit_device_rows` AS `three_phase_row`
-        WHERE `three_phase_row`.`circuit_id` = `c`.`id`
-          AND `three_phase_row`.`phase_type` = 'three_phase'
-      ) AND NOT EXISTS (
-        SELECT 1
-        FROM `circuit_device_rows` AS `other_row`
-        WHERE `other_row`.`circuit_id` = `c`.`id`
-          AND `other_row`.`phase_type` = 'single_phase'
-      ) THEN `p`.`three_phase_voltage_v`
-      ELSE `p`.`single_phase_voltage_v`
-    END AS `derived_voltage`
-  FROM `circuits` AS `c`
-  INNER JOIN `circuit_lists` AS `cl`
-    ON `cl`.`id` = `c`.`circuit_list_id`
-  INNER JOIN `projects` AS `p`
-    ON `p`.`id` = `cl`.`project_id`
-  INNER JOIN `circuit_sections` AS `cs`
-    ON `cs`.`id` = `c`.`section_id`
-)
-UPDATE `circuits`
-SET `voltage` = (
-  SELECT `derived_voltage`
-  FROM `derived_circuit_voltages`
-  WHERE `circuit_id` = `circuits`.`id`
-)
-WHERE `id` IN (
-  SELECT `circuit_id`
-  FROM `derived_circuit_voltages`
-);

src/db/migrations/0020_normalize_phase_types.sql

@@ -1,85 +0,0 @@
-UPDATE `project_devices`
-SET `phase_type` = CASE
-  WHEN LOWER(REPLACE(REPLACE(TRIM(`phase_type`), '-', ''), '_', ''))
-    IN ('1ph', '1phase', '1phasig', 'einphasig', 'singlephase')
-    THEN 'single_phase'
-  WHEN LOWER(REPLACE(REPLACE(TRIM(`phase_type`), '-', ''), '_', ''))
-    IN ('3ph', '3phase', '3phasig', 'dreiphasig', 'threephase')
-    THEN 'three_phase'
-  ELSE `phase_type`
-END
-WHERE LOWER(REPLACE(REPLACE(TRIM(`phase_type`), '-', ''), '_', ''))
-  IN (
-    '1ph',
-    '1phase',
-    '1phasig',
-    'einphasig',
-    'singlephase',
-    '3ph',
-    '3phase',
-    '3phasig',
-    'dreiphasig',
-    'threephase'
-  );
---> statement-breakpoint
-UPDATE `circuit_device_rows`
-SET `phase_type` = CASE
-  WHEN LOWER(REPLACE(REPLACE(TRIM(`phase_type`), '-', ''), '_', ''))
-    IN ('1ph', '1phase', '1phasig', 'einphasig', 'singlephase')
-    THEN 'single_phase'
-  WHEN LOWER(REPLACE(REPLACE(TRIM(`phase_type`), '-', ''), '_', ''))
-    IN ('3ph', '3phase', '3phasig', 'dreiphasig', 'threephase')
-    THEN 'three_phase'
-  ELSE `phase_type`
-END
-WHERE LOWER(REPLACE(REPLACE(TRIM(`phase_type`), '-', ''), '_', ''))
-  IN (
-    '1ph',
-    '1phase',
-    '1phasig',
-    'einphasig',
-    'singlephase',
-    '3ph',
-    '3phase',
-    '3phasig',
-    'dreiphasig',
-    'threephase'
-  );
---> statement-breakpoint
-WITH `derived_circuit_voltages` AS (
-  SELECT
-    `c`.`id` AS `circuit_id`,
-    CASE
-      WHEN `cs`.`key` = 'three_phase' THEN `p`.`three_phase_voltage_v`
-      WHEN `cs`.`key` IN ('lighting', 'single_phase') THEN `p`.`single_phase_voltage_v`
-      WHEN EXISTS (
-        SELECT 1
-        FROM `circuit_device_rows` AS `three_phase_row`
-        WHERE `three_phase_row`.`circuit_id` = `c`.`id`
-          AND `three_phase_row`.`phase_type` = 'three_phase'
-      ) AND NOT EXISTS (
-        SELECT 1
-        FROM `circuit_device_rows` AS `single_phase_row`
-        WHERE `single_phase_row`.`circuit_id` = `c`.`id`
-          AND `single_phase_row`.`phase_type` = 'single_phase'
-      ) THEN `p`.`three_phase_voltage_v`
-      ELSE `p`.`single_phase_voltage_v`
-    END AS `derived_voltage`
-  FROM `circuits` AS `c`
-  INNER JOIN `circuit_lists` AS `cl`
-    ON `cl`.`id` = `c`.`circuit_list_id`
-  INNER JOIN `projects` AS `p`
-    ON `p`.`id` = `cl`.`project_id`
-  INNER JOIN `circuit_sections` AS `cs`
-    ON `cs`.`id` = `c`.`section_id`
-)
-UPDATE `circuits`
-SET `voltage` = (
-  SELECT `derived_voltage`
-  FROM `derived_circuit_voltages`
-  WHERE `circuit_id` = `circuits`.`id`
-)
-WHERE `id` IN (
-  SELECT `circuit_id`
-  FROM `derived_circuit_voltages`
-);

src/db/migrations/0021_fill_missing_phase_types.sql

@@ -1,75 +0,0 @@
-UPDATE `circuit_device_rows`
-SET `phase_type` = COALESCE(
-  (
-    SELECT `pd`.`phase_type`
-    FROM `project_devices` AS `pd`
-    WHERE `pd`.`id` = `circuit_device_rows`.`linked_project_device_id`
-      AND `pd`.`phase_type` IN ('single_phase', 'three_phase')
-  ),
-  (
-    SELECT CASE
-      WHEN `cs`.`key` = 'three_phase' THEN 'three_phase'
-      WHEN `cs`.`key` IN ('lighting', 'single_phase') THEN 'single_phase'
-      ELSE NULL
-    END
-    FROM `circuits` AS `c`
-    INNER JOIN `circuit_sections` AS `cs`
-      ON `cs`.`id` = `c`.`section_id`
-    WHERE `c`.`id` = `circuit_device_rows`.`circuit_id`
-  )
-)
-WHERE `phase_type` IS NULL
-  AND (
-    EXISTS (
-      SELECT 1
-      FROM `project_devices` AS `pd`
-      WHERE `pd`.`id` = `circuit_device_rows`.`linked_project_device_id`
-        AND `pd`.`phase_type` IN ('single_phase', 'three_phase')
-    )
-    OR EXISTS (
-      SELECT 1
-      FROM `circuits` AS `c`
-      INNER JOIN `circuit_sections` AS `cs`
-        ON `cs`.`id` = `c`.`section_id`
-      WHERE `c`.`id` = `circuit_device_rows`.`circuit_id`
-        AND `cs`.`key` IN ('lighting', 'single_phase', 'three_phase')
-    )
-  );
---> statement-breakpoint
-WITH `derived_circuit_voltages` AS (
-  SELECT
-    `c`.`id` AS `circuit_id`,
-    CASE
-      WHEN `cs`.`key` = 'three_phase' THEN `p`.`three_phase_voltage_v`
-      WHEN `cs`.`key` IN ('lighting', 'single_phase') THEN `p`.`single_phase_voltage_v`
-      WHEN EXISTS (
-        SELECT 1
-        FROM `circuit_device_rows` AS `three_phase_row`
-        WHERE `three_phase_row`.`circuit_id` = `c`.`id`
-          AND `three_phase_row`.`phase_type` = 'three_phase'
-      ) AND NOT EXISTS (
-        SELECT 1
-        FROM `circuit_device_rows` AS `single_phase_row`
-        WHERE `single_phase_row`.`circuit_id` = `c`.`id`
-          AND `single_phase_row`.`phase_type` = 'single_phase'
-      ) THEN `p`.`three_phase_voltage_v`
-      ELSE `p`.`single_phase_voltage_v`
-    END AS `derived_voltage`
-  FROM `circuits` AS `c`
-  INNER JOIN `circuit_lists` AS `cl`
-    ON `cl`.`id` = `c`.`circuit_list_id`
-  INNER JOIN `projects` AS `p`
-    ON `p`.`id` = `cl`.`project_id`
-  INNER JOIN `circuit_sections` AS `cs`
-    ON `cs`.`id` = `c`.`section_id`
-)
-UPDATE `circuits`
-SET `voltage` = (
-  SELECT `derived_voltage`
-  FROM `derived_circuit_voltages`
-  WHERE `circuit_id` = `circuits`.`id`
-)
-WHERE `id` IN (
-  SELECT `circuit_id`
-  FROM `derived_circuit_voltages`
-);

src/db/migrations/0022_default_remaining_phase_types.sql

@@ -1,7 +0,0 @@
-UPDATE `circuit_device_rows`
-SET `phase_type` = 'single_phase'
-WHERE `phase_type` IS NULL;
---> statement-breakpoint
-UPDATE `global_devices`
-SET `phase_count` = 1
-WHERE `phase_count` IS NULL OR `phase_count` NOT IN (1, 3);

src/db/migrations/0023_cheerful_night_thrasher.sql

@@ -1 +0,0 @@
-ALTER TABLE `distribution_boards` ADD `simultaneity_factor` real DEFAULT 1 NOT NULL;

src/db/migrations/0024_damp_mister_sinister.sql

@@ -1,150 +0,0 @@
-CREATE TABLE `circuit_list_equipment_identifiers` (
-	`owner_type` text NOT NULL,
-	`owner_id` text NOT NULL,
-	`circuit_list_id` text NOT NULL,
-	`equipment_identifier` text NOT NULL,
-	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_list_equipment_identifiers_owner_unique` ON `circuit_list_equipment_identifiers` (`owner_type`,`owner_id`);--> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_list_equipment_identifiers_list_identifier_unique` ON `circuit_list_equipment_identifiers` (`circuit_list_id`,`equipment_identifier`);--> statement-breakpoint
-CREATE TABLE `circuit_protection_devices` (
-	`circuit_id` text PRIMARY KEY NOT NULL,
-	`type` text NOT NULL,
-	`rated_current_a` real NOT NULL,
-	`fuse_utilization_category` text,
-	`trip_characteristic` text,
-	`rcd_type` text,
-	`rated_residual_current_ma` real,
-	FOREIGN KEY (`circuit_id`) REFERENCES `circuits`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE TABLE `distribution_board_component_protection_devices` (
-	`component_id` text PRIMARY KEY NOT NULL,
-	`type` text NOT NULL,
-	`rated_current_a` real NOT NULL,
-	`fuse_utilization_category` text,
-	`trip_characteristic` text,
-	`rcd_type` text,
-	`rated_residual_current_ma` real,
-	FOREIGN KEY (`component_id`) REFERENCES `distribution_board_components`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE TABLE `distribution_board_components` (
-	`id` text PRIMARY KEY NOT NULL,
-	`circuit_list_id` text NOT NULL,
-	`section_id` text,
-	`equipment_identifier` text NOT NULL,
-	`name` text NOT NULL,
-	`role` text NOT NULL,
-	`placement` text NOT NULL,
-	`sort_order` integer DEFAULT 0 NOT NULL,
-	FOREIGN KEY (`circuit_list_id`) REFERENCES `circuit_lists`(`id`) ON UPDATE no action ON DELETE cascade,
-	FOREIGN KEY (`section_id`) REFERENCES `circuit_sections`(`id`) ON UPDATE no action ON DELETE cascade
-);
---> statement-breakpoint
-CREATE UNIQUE INDEX `distribution_board_components_list_identifier_unique` ON `distribution_board_components` (`circuit_list_id`,`equipment_identifier`);--> statement-breakpoint
-CREATE UNIQUE INDEX `distribution_board_components_section_role_unique` ON `distribution_board_components` (`section_id`,`role`);--> statement-breakpoint
-ALTER TABLE `circuit_sections` ADD `category` text;--> statement-breakpoint
-ALTER TABLE `circuit_sections` ADD `group_number` integer;--> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_sections_list_category_group_unique` ON `circuit_sections` (`circuit_list_id`,`category`,`group_number`);--> statement-breakpoint
-UPDATE `circuit_sections`
-SET
-	`category` = CASE `key`
-		WHEN 'lighting' THEN 'lighting'
-		WHEN 'single_phase' THEN 'single_phase'
-		WHEN 'three_phase' THEN 'three_phase'
-	END,
-	`group_number` = 1
-WHERE `key` IN ('lighting', 'single_phase', 'three_phase');--> statement-breakpoint
-INSERT INTO `circuit_list_equipment_identifiers` (
-	`owner_type`,
-	`owner_id`,
-	`circuit_list_id`,
-	`equipment_identifier`
-)
-SELECT
-	'circuit',
-	`id`,
-	`circuit_list_id`,
-	`equipment_identifier`
-FROM `circuits`;--> statement-breakpoint
-CREATE UNIQUE INDEX `circuit_list_equipment_identifiers_normalized_unique`
-ON `circuit_list_equipment_identifiers` (
-	`circuit_list_id`,
-	lower(trim(`equipment_identifier`))
-);--> statement-breakpoint
-CREATE UNIQUE INDEX `distribution_board_components_fixed_role_unique`
-ON `distribution_board_components` (`circuit_list_id`, `role`)
-WHERE `role` IN ('main_switch', 'surge_protective_device');--> statement-breakpoint
-CREATE TRIGGER `circuits_equipment_identifier_insert`
-AFTER INSERT ON `circuits`
-BEGIN
-	INSERT INTO `circuit_list_equipment_identifiers` (
-		`owner_type`,
-		`owner_id`,
-		`circuit_list_id`,
-		`equipment_identifier`
-	)
-	VALUES (
-		'circuit',
-		NEW.`id`,
-		NEW.`circuit_list_id`,
-		NEW.`equipment_identifier`
-	);
-END;--> statement-breakpoint
-CREATE TRIGGER `circuits_equipment_identifier_update`
-AFTER UPDATE OF `circuit_list_id`, `equipment_identifier` ON `circuits`
-BEGIN
-	UPDATE `circuit_list_equipment_identifiers`
-	SET
-		`circuit_list_id` = NEW.`circuit_list_id`,
-		`equipment_identifier` = NEW.`equipment_identifier`
-	WHERE
-		`owner_type` = 'circuit'
-		AND `owner_id` = OLD.`id`;
-END;--> statement-breakpoint
-CREATE TRIGGER `circuits_equipment_identifier_delete`
-AFTER DELETE ON `circuits`
-BEGIN
-	DELETE FROM `circuit_list_equipment_identifiers`
-	WHERE
-		`owner_type` = 'circuit'
-		AND `owner_id` = OLD.`id`;
-END;--> statement-breakpoint
-CREATE TRIGGER `distribution_board_components_equipment_identifier_insert`
-AFTER INSERT ON `distribution_board_components`
-BEGIN
-	INSERT INTO `circuit_list_equipment_identifiers` (
-		`owner_type`,
-		`owner_id`,
-		`circuit_list_id`,
-		`equipment_identifier`
-	)
-	VALUES (
-		'distribution_board_component',
-		NEW.`id`,
-		NEW.`circuit_list_id`,
-		NEW.`equipment_identifier`
-	);
-END;--> statement-breakpoint
-CREATE TRIGGER `distribution_board_components_equipment_identifier_update`
-AFTER UPDATE OF `circuit_list_id`, `equipment_identifier`
-ON `distribution_board_components`
-BEGIN
-	UPDATE `circuit_list_equipment_identifiers`
-	SET
-		`circuit_list_id` = NEW.`circuit_list_id`,
-		`equipment_identifier` = NEW.`equipment_identifier`
-	WHERE
-		`owner_type` = 'distribution_board_component'
-		AND `owner_id` = OLD.`id`;
-END;--> statement-breakpoint
-CREATE TRIGGER `distribution_board_components_equipment_identifier_delete`
-AFTER DELETE ON `distribution_board_components`
-BEGIN
-	DELETE FROM `circuit_list_equipment_identifiers`
-	WHERE
-		`owner_type` = 'distribution_board_component'
-		AND `owner_id` = OLD.`id`;
-END;

src/db/migrations/meta/_journal.json

@@ -5,176 +5,8 @@
     {
       "idx": 0,
       "version": "6",
-      "when": 1777565414148,
+      "when": 1785499119431,
-      "tag": "0000_bizarre_colossus",
+      "tag": "0000_whole_surge",
-      "breakpoints": true
-    },
-    {
-      "idx": 1,
-      "version": "6",
-      "when": 1777577000000,
-      "tag": "0001_global_devices",
-      "breakpoints": true
-    },
-    {
-      "idx": 2,
-      "version": "6",
-      "when": 1777580000000,
-      "tag": "0002_project_voltage_defaults",
-      "breakpoints": true
-    },
-    {
-      "idx": 3,
-      "version": "6",
-      "when": 1777589000000,
-      "tag": "0003_project_floors_rooms",
-      "breakpoints": true
-    },
-    {
-      "idx": 4,
-      "version": "6",
-      "when": 1777594000000,
-      "tag": "0004_circuit_lists_and_entry_fields",
-      "breakpoints": true
-    },
-    {
-      "idx": 5,
-      "version": "6",
-      "when": 1777597000000,
-      "tag": "0005_project_devices",
-      "breakpoints": true
-    },
-    {
-      "idx": 6,
-      "version": "6",
-      "when": 1777652000000,
-      "tag": "0006_device_display_name",
-      "breakpoints": true
-    },
-    {
-      "idx": 7,
-      "version": "6",
-      "when": 1777680000000,
-      "tag": "0007_consumer_device_link",
-      "breakpoints": true
-    },
-    {
-      "idx": 8,
-      "version": "6",
-      "when": 1777800000000,
-      "tag": "0008_circuit_first_model",
-      "breakpoints": true
-    },
-    {
-      "idx": 9,
-      "version": "6",
-      "when": 1784743200000,
-      "tag": "0009_project_device_circuit_fields",
-      "breakpoints": true
-    },
-    {
-      "idx": 10,
-      "version": "6",
-      "when": 1784746800000,
-      "tag": "0010_circuit_control_requirement",
-      "breakpoints": true
-    },
-    {
-      "idx": 11,
-      "version": "6",
-      "when": 1784832541202,
-      "tag": "0011_project_device_canonical_fields",
-      "breakpoints": true
-    },
-    {
-      "idx": 12,
-      "version": "6",
-      "when": 1784833957929,
-      "tag": "0012_project_revision_foundation",
-      "breakpoints": true
-    },
-    {
-      "idx": 13,
-      "version": "6",
-      "when": 1784835703230,
-      "tag": "0013_project_history_stacks",
-      "breakpoints": true
-    },
-    {
-      "idx": 14,
-      "version": "6",
-      "when": 1785009799979,
-      "tag": "0014_project_snapshots",
-      "breakpoints": true
-    },
-    {
-      "idx": 15,
-      "version": "6",
-      "when": 1785014383032,
-      "tag": "0015_modern_madame_masque",
-      "breakpoints": true
-    },
-    {
-      "idx": 16,
-      "version": "6",
-      "when": 1785254079435,
-      "tag": "0016_dashing_darkstar",
-      "breakpoints": true
-    },
-    {
-      "idx": 17,
-      "version": "6",
-      "when": 1785307189539,
-      "tag": "0017_vengeful_romulus",
-      "breakpoints": true
-    },
-    {
-      "idx": 18,
-      "version": "6",
-      "when": 1785308458789,
-      "tag": "0018_fancy_argent",
-      "breakpoints": true
-    },
-    {
-      "idx": 19,
-      "version": "6",
-      "when": 1785310907349,
-      "tag": "0019_normalize_project_voltages",
-      "breakpoints": true
-    },
-    {
-      "idx": 20,
-      "version": "6",
-      "when": 1785314248007,
-      "tag": "0020_normalize_phase_types",
-      "breakpoints": true
-    },
-    {
-      "idx": 21,
-      "version": "6",
-      "when": 1785314558555,
-      "tag": "0021_fill_missing_phase_types",
-      "breakpoints": true
-    },
-    {
-      "idx": 22,
-      "version": "6",
-      "when": 1785314626476,
-      "tag": "0022_default_remaining_phase_types",
-      "breakpoints": true
-    },
-    {
-      "idx": 23,
-      "version": "6",
-      "when": 1785343645615,
-      "tag": "0023_cheerful_night_thrasher",
-      "breakpoints": true
-    },
-    {
-      "idx": 24,
-      "version": "6",
-      "when": 1785431250141,
-      "tag": "0024_damp_mister_sinister",
       "breakpoints": true
     }
   ]

src/db/repositories/circuit-device-row-move-project-command.repository.ts

@@ -382,9 +382,6 @@ export class CircuitDeviceRowMoveProjectCommandRepository
         equipmentIdentifier: snapshot.equipmentIdentifier,
         displayName: snapshot.displayName,
         sortOrder: snapshot.sortOrder,
-        protectionType: snapshot.protectionType,
-        protectionRatedCurrent: snapshot.protectionRatedCurrent,
-        protectionCharacteristic: snapshot.protectionCharacteristic,
         cableType: snapshot.cableType,
         cableCrossSection: snapshot.cableCrossSection,
         cableLength: snapshot.cableLength,
@@ -423,11 +420,6 @@ export class CircuitDeviceRowMoveProjectCommandRepository
         snapshot.equipmentIdentifier ||
       current.displayName !== snapshot.displayName ||
       current.sortOrder !== snapshot.sortOrder ||
-      current.protectionType !== snapshot.protectionType ||
-      current.protectionRatedCurrent !==
-        snapshot.protectionRatedCurrent ||
-      current.protectionCharacteristic !==
-        snapshot.protectionCharacteristic ||
       current.cableType !== snapshot.cableType ||
       current.cableCrossSection !== snapshot.cableCrossSection ||
       current.cableLength !== snapshot.cableLength ||

src/db/repositories/circuit-device-row-structure-project-command.repository.ts

@@ -77,11 +77,6 @@ export class CircuitDeviceRowStructureProjectCommandRepository
     source: ExecuteCircuitDeviceRowStructureCommandInput["source"],
     row: CircuitDeviceRowSnapshot
   ) {
-    if (source === "user" && row.legacyConsumerId !== null) {
-      throw new Error(
-        "User commands cannot assign legacy consumer ids."
-      );
-    }
     if (source === "user" && !isElectricalPhaseType(row.phaseType)) {
       throw new Error("Device-row phase type is invalid.");
     }

src/db/repositories/circuit-device-row-structure.persistence.ts

@@ -49,7 +49,6 @@ export function toCircuitDeviceRowSnapshot(
     id: row.id,
     circuitId: row.circuitId,
     linkedProjectDeviceId: row.linkedProjectDeviceId,
-    legacyConsumerId: row.legacyConsumerId,
     sortOrder: row.sortOrder,
     name: row.name,
     displayName: row.displayName,

src/db/repositories/circuit-device-row.persistence.ts

@@ -44,7 +44,6 @@ export interface CircuitDeviceRowPatchInput {
 export interface CircuitDeviceRowCreateInput extends CircuitDeviceRowUpdateInput {
   circuitId: string;
   linkedProjectDeviceId?: string;
-  legacyConsumerId?: string;
   sortOrder: number;
 }
 
@@ -110,7 +109,6 @@ export function toCircuitDeviceRowCreateValues(
   return {
     id,
     circuitId: input.circuitId,
-    legacyConsumerId: input.legacyConsumerId ?? null,
     sortOrder: input.sortOrder,
     ...toCircuitDeviceRowUpdateValues(input),
   };

src/db/repositories/circuit-device-row.repository.ts

@@ -25,7 +25,6 @@ export class CircuitDeviceRowRepository {
         id: circuitDeviceRows.id,
         circuitId: circuitDeviceRows.circuitId,
         linkedProjectDeviceId: circuitDeviceRows.linkedProjectDeviceId,
-        legacyConsumerId: circuitDeviceRows.legacyConsumerId,
         sortOrder: circuitDeviceRows.sortOrder,
         name: circuitDeviceRows.name,
         displayName: circuitDeviceRows.displayName,

src/db/repositories/circuit-structure-project-command.repository.ts

@@ -133,11 +133,6 @@ export class CircuitStructureProjectCommandRepository
         throw new Error("Circuit device-row id already exists.");
       }
       for (const row of snapshot.deviceRows) {
-        if (source === "user" && row.legacyConsumerId !== null) {
-          throw new Error(
-            "User commands cannot assign legacy consumer ids."
-          );
-        }
         if (source === "user" && !isElectricalPhaseType(row.phaseType)) {
           throw new Error("Device-row phase type is invalid.");
         }
@@ -158,9 +153,6 @@ export class CircuitStructureProjectCommandRepository
         equipmentIdentifier: snapshot.equipmentIdentifier,
         displayName: snapshot.displayName,
         sortOrder: snapshot.sortOrder,
-        protectionType: snapshot.protectionType,
-        protectionRatedCurrent: snapshot.protectionRatedCurrent,
-        protectionCharacteristic: snapshot.protectionCharacteristic,
         cableType: snapshot.cableType,
         cableCrossSection: snapshot.cableCrossSection,
         cableLength: snapshot.cableLength,
@@ -238,9 +230,6 @@ export class CircuitStructureProjectCommandRepository
       equipmentIdentifier: circuit.equipmentIdentifier,
       displayName: circuit.displayName,
       sortOrder: circuit.sortOrder,
-      protectionType: circuit.protectionType,
-      protectionRatedCurrent: circuit.protectionRatedCurrent,
-      protectionCharacteristic: circuit.protectionCharacteristic,
       cableType: circuit.cableType,
       cableCrossSection: circuit.cableCrossSection,
       cableLength: circuit.cableLength,

src/db/repositories/circuit.persistence.ts

@@ -4,9 +4,6 @@ export interface CircuitCreatePersistenceInput {
   equipmentIdentifier: string;
   displayName?: string;
   sortOrder: number;
-  protectionType?: string;
-  protectionRatedCurrent?: number;
-  protectionCharacteristic?: string;
   cableType?: string;
   cableCrossSection?: string;
   cableLength?: number;
@@ -24,9 +21,6 @@ export interface CircuitPatchPersistenceInput {
   equipmentIdentifier?: string;
   displayName?: string | null;
   sortOrder?: number;
-  protectionType?: string | null;
-  protectionRatedCurrent?: number | null;
-  protectionCharacteristic?: string | null;
   cableType?: string | null;
   cableCrossSection?: string | null;
   cableLength?: number | null;
@@ -47,9 +41,6 @@ export function toCircuitCreateValues(id: string, input: CircuitCreatePersistenc
     equipmentIdentifier: input.equipmentIdentifier,
     displayName: input.displayName ?? null,
     sortOrder: input.sortOrder,
-    protectionType: input.protectionType ?? null,
-    protectionRatedCurrent: input.protectionRatedCurrent ?? null,
-    protectionCharacteristic: input.protectionCharacteristic ?? null,
     cableType: input.cableType ?? null,
     cableCrossSection: input.cableCrossSection ?? null,
     cableLength: input.cableLength ?? null,
@@ -74,13 +65,6 @@ export function toCircuitPatchValues(input: CircuitPatchPersistenceInput) {
   }
   if (has("displayName")) values.displayName = input.displayName ?? null;
   if (input.sortOrder !== undefined) values.sortOrder = input.sortOrder;
-  if (has("protectionType")) values.protectionType = input.protectionType ?? null;
-  if (has("protectionRatedCurrent")) {
-    values.protectionRatedCurrent = input.protectionRatedCurrent ?? null;
-  }
-  if (has("protectionCharacteristic")) {
-    values.protectionCharacteristic = input.protectionCharacteristic ?? null;
-  }
   if (has("cableType")) values.cableType = input.cableType ?? null;
   if (has("cableCrossSection")) {
     values.cableCrossSection = input.cableCrossSection ?? null;

src/db/repositories/distribution-board-structure-project-command.repository.ts

@@ -12,7 +12,6 @@ import {
 import {
   assertDistributionBoardUpdateProjectCommand,
   createDistributionBoardUpdateProjectCommand,
-  legacyDistributionBoardUpdateCommandSchemaVersion,
   type DistributionBoardUpdateField,
   type DistributionBoardUpdatePatch,
   type DistributionBoardUpdateProjectCommand,
@@ -332,19 +331,10 @@ export class DistributionBoardStructureProjectCommandRepository
         getDistributionBoardFieldValue(current, change.field),
       ])
     ) as DistributionBoardUpdatePatch;
-    const currentInverse = createDistributionBoardUpdateProjectCommand(
+    const inverse = createDistributionBoardUpdateProjectCommand(
       current.id,
       inversePatch
     );
-    const inverse =
-      input.command.schemaVersion ===
-      legacyDistributionBoardUpdateCommandSchemaVersion
-        ? ({
-            ...currentInverse,
-            schemaVersion:
-              legacyDistributionBoardUpdateCommandSchemaVersion,
-          } as DistributionBoardUpdateProjectCommand)
-        : currentInverse;
     const updated = database
       .update(distributionBoards)
       .set(patch)

src/db/repositories/distribution-board-subtree-project-command.repository.ts

@@ -0,0 +1,432 @@
+import { and, asc, eq, inArray } from "drizzle-orm";
+import {
+  assertDistributionBoardDeleteSubtreeProjectCommand,
+  assertDistributionBoardInsertSubtreeProjectCommand,
+  createDistributionBoardDeleteSubtreeProjectCommand,
+  createDistributionBoardInsertSubtreeProjectCommand,
+  distributionBoardDeleteSubtreeCommandType,
+  distributionBoardInsertSubtreeCommandType,
+  type DistributionBoardSubtreeProjectCommand,
+} from "../../domain/models/distribution-board-subtree-project-command.model.js";
+import {
+  assertDistributionBoardSubtreeSnapshot,
+  type DistributionBoardSubtreeSnapshot,
+} from "../../domain/models/distribution-board-subtree-snapshot.model.js";
+import type {
+  DistributionBoardSubtreeProjectCommandStore,
+  ExecuteDistributionBoardSubtreeCommandInput,
+} from "../../domain/ports/distribution-board-subtree-project-command.store.js";
+import type { AppDatabase } from "../database-context.js";
+import { circuitDeviceRows } from "../schema/circuit-device-rows.js";
+import { circuitLists } from "../schema/circuit-lists.js";
+import { circuitProtectionDevices } from "../schema/circuit-protection-devices.js";
+import { circuitSections } from "../schema/circuit-sections.js";
+import { circuits } from "../schema/circuits.js";
+import { distributionBoardComponentProtectionDevices } from "../schema/distribution-board-component-protection-devices.js";
+import { distributionBoardComponents } from "../schema/distribution-board-components.js";
+import { distributionBoards } from "../schema/distribution-boards.js";
+import { floors } from "../schema/floors.js";
+import { projectDevices } from "../schema/project-devices.js";
+import { projects } from "../schema/projects.js";
+import { rooms } from "../schema/rooms.js";
+import { executeProjectCommandTransaction } from "./project-command-transaction.persistence.js";
+
+export class DistributionBoardSubtreeProjectCommandRepository
+  implements DistributionBoardSubtreeProjectCommandStore
+{
+  constructor(private readonly database: AppDatabase) {}
+
+  capture(projectId: string, distributionBoardId: string) {
+    return this.captureFrom(
+      this.database,
+      projectId,
+      distributionBoardId
+    );
+  }
+
+  execute(input: ExecuteDistributionBoardSubtreeCommandInput) {
+    if (input.command.type === distributionBoardInsertSubtreeCommandType) {
+      assertDistributionBoardInsertSubtreeProjectCommand(input.command);
+    } else {
+      assertDistributionBoardDeleteSubtreeProjectCommand(input.command);
+    }
+    return executeProjectCommandTransaction(
+      this.database,
+      input,
+      (tx) => this.applyCommand(tx, input.projectId, input.command)
+    );
+  }
+
+  private applyCommand(
+    database: AppDatabase,
+    projectId: string,
+    command: DistributionBoardSubtreeProjectCommand
+  ) {
+    if (command.type === distributionBoardInsertSubtreeCommandType) {
+      this.insert(database, projectId, command.payload.snapshot);
+      return createDistributionBoardDeleteSubtreeProjectCommand(
+        command.payload.snapshot
+      );
+    }
+    if (command.type === distributionBoardDeleteSubtreeCommandType) {
+      const current = this.captureFrom(
+        database,
+        projectId,
+        command.payload.snapshot.distributionBoard.id
+      );
+      if (!sameSnapshot(current, command.payload.snapshot)) {
+        throw new Error(
+          "Distribution-board subtree changed before deletion."
+        );
+      }
+      const deleted = database
+        .delete(distributionBoards)
+        .where(
+          and(
+            eq(
+              distributionBoards.id,
+              current.distributionBoard.id
+            ),
+            eq(distributionBoards.projectId, projectId)
+          )
+        )
+        .run();
+      if (deleted.changes !== 1) {
+        throw new Error(
+          "Distribution-board subtree could not be deleted."
+        );
+      }
+      return createDistributionBoardInsertSubtreeProjectCommand(
+        command.payload.snapshot
+      );
+    }
+    throw new Error("Unsupported distribution-board subtree command.");
+  }
+
+  private captureFrom(
+    database: AppDatabase,
+    projectId: string,
+    distributionBoardId: string
+  ): DistributionBoardSubtreeSnapshot {
+    const distributionBoard = database
+      .select()
+      .from(distributionBoards)
+      .where(
+        and(
+          eq(distributionBoards.id, distributionBoardId),
+          eq(distributionBoards.projectId, projectId)
+        )
+      )
+      .get();
+    if (!distributionBoard) {
+      throw new Error("Distribution board not found.");
+    }
+    const circuitList = database
+      .select()
+      .from(circuitLists)
+      .where(
+        and(
+          eq(circuitLists.distributionBoardId, distributionBoard.id),
+          eq(circuitLists.projectId, projectId)
+        )
+      )
+      .get();
+    if (!circuitList) {
+      throw new Error("Distribution-board circuit list not found.");
+    }
+    const sections = database
+      .select()
+      .from(circuitSections)
+      .where(eq(circuitSections.circuitListId, circuitList.id))
+      .orderBy(asc(circuitSections.sortOrder), asc(circuitSections.id))
+      .all();
+    const components = database
+      .select()
+      .from(distributionBoardComponents)
+      .where(eq(distributionBoardComponents.circuitListId, circuitList.id))
+      .orderBy(
+        asc(distributionBoardComponents.sortOrder),
+        asc(distributionBoardComponents.id)
+      )
+      .all()
+      .map((component) => ({
+        component,
+        protectionDevice:
+          database
+            .select()
+            .from(distributionBoardComponentProtectionDevices)
+            .where(
+              eq(
+                distributionBoardComponentProtectionDevices.componentId,
+                component.id
+              )
+            )
+            .get() ?? null,
+      }));
+    const circuitSnapshots = database
+      .select()
+      .from(circuits)
+      .where(eq(circuits.circuitListId, circuitList.id))
+      .orderBy(asc(circuits.sortOrder), asc(circuits.id))
+      .all()
+      .map((circuit) => {
+        const { isReserve, ...values } = circuit;
+        return {
+          ...values,
+          isReserve: Boolean(isReserve),
+          deviceRows: database
+            .select()
+            .from(circuitDeviceRows)
+            .where(eq(circuitDeviceRows.circuitId, circuit.id))
+            .orderBy(
+              asc(circuitDeviceRows.sortOrder),
+              asc(circuitDeviceRows.id)
+            )
+            .all(),
+          protectionDevice:
+            database
+              .select()
+              .from(circuitProtectionDevices)
+              .where(eq(circuitProtectionDevices.circuitId, circuit.id))
+              .get() ?? null,
+        };
+      });
+    const snapshot: DistributionBoardSubtreeSnapshot = {
+      distributionBoard,
+      circuitList,
+      sections,
+      components,
+      circuits: circuitSnapshots,
+    };
+    assertDistributionBoardSubtreeSnapshot(snapshot);
+    return snapshot;
+  }
+
+  private insert(
+    database: AppDatabase,
+    projectId: string,
+    snapshot: DistributionBoardSubtreeSnapshot
+  ) {
+    assertDistributionBoardSubtreeSnapshot(snapshot);
+    if (
+      snapshot.distributionBoard.projectId !== projectId ||
+      snapshot.circuitList.projectId !== projectId
+    ) {
+      throw new Error(
+        "Distribution-board subtree belongs to another project."
+      );
+    }
+    this.assertProjectReferences(database, projectId, snapshot);
+    this.assertIdsAvailable(database, snapshot);
+
+    database
+      .insert(distributionBoards)
+      .values(snapshot.distributionBoard)
+      .run();
+    database.insert(circuitLists).values(snapshot.circuitList).run();
+    if (snapshot.sections.length > 0) {
+      database.insert(circuitSections).values(snapshot.sections).run();
+    }
+    for (const entry of snapshot.components) {
+      database
+        .insert(distributionBoardComponents)
+        .values(entry.component)
+        .run();
+      if (entry.protectionDevice !== null) {
+        database
+          .insert(distributionBoardComponentProtectionDevices)
+          .values(entry.protectionDevice)
+          .run();
+      }
+    }
+    for (const circuit of snapshot.circuits) {
+      const { deviceRows, protectionDevice, isReserve, ...values } =
+        circuit;
+      database
+        .insert(circuits)
+        .values({ ...values, isReserve: isReserve ? 1 : 0 })
+        .run();
+      if (protectionDevice !== null && protectionDevice !== undefined) {
+        database
+          .insert(circuitProtectionDevices)
+          .values(protectionDevice)
+          .run();
+      }
+      if (deviceRows.length > 0) {
+        database.insert(circuitDeviceRows).values(deviceRows).run();
+      }
+    }
+  }
+
+  private assertProjectReferences(
+    database: AppDatabase,
+    projectId: string,
+    snapshot: DistributionBoardSubtreeSnapshot
+  ) {
+    const project = database
+      .select({
+        enabledSupplyTypes:
+          projects.enabledDistributionBoardSupplyTypes,
+      })
+      .from(projects)
+      .where(eq(projects.id, projectId))
+      .get();
+    if (!project) {
+      throw new Error("Project not found.");
+    }
+    if (
+      snapshot.distributionBoard.supplyType !== null &&
+      !project.enabledSupplyTypes.includes(
+        snapshot.distributionBoard.supplyType
+      )
+    ) {
+      throw new Error(
+        "Distribution-board subtree uses a disabled supply type."
+      );
+    }
+    if (snapshot.distributionBoard.floorId !== null) {
+      const floor = database
+        .select({ projectId: floors.projectId })
+        .from(floors)
+        .where(eq(floors.id, snapshot.distributionBoard.floorId))
+        .get();
+      if (!floor || floor.projectId !== projectId) {
+        throw new Error(
+          "Distribution-board floor does not belong to project."
+        );
+      }
+    }
+    const linkedProjectDeviceIds = uniqueStrings(
+      snapshot.circuits.flatMap((circuit) =>
+        circuit.deviceRows.flatMap((row) =>
+          row.linkedProjectDeviceId === null
+            ? []
+            : [row.linkedProjectDeviceId]
+        )
+      )
+    );
+    if (linkedProjectDeviceIds.length > 0) {
+      const references = database
+        .select({ id: projectDevices.id, projectId: projectDevices.projectId })
+        .from(projectDevices)
+        .where(inArray(projectDevices.id, linkedProjectDeviceIds))
+        .all();
+      if (
+        references.length !== linkedProjectDeviceIds.length ||
+        references.some((reference) => reference.projectId !== projectId)
+      ) {
+        throw new Error(
+          "Distribution-board project-device reference is invalid."
+        );
+      }
+    }
+    const roomIds = uniqueStrings(
+      snapshot.circuits.flatMap((circuit) =>
+        circuit.deviceRows.flatMap((row) =>
+          row.roomId === null ? [] : [row.roomId]
+        )
+      )
+    );
+    if (roomIds.length > 0) {
+      const references = database
+        .select({ id: rooms.id, projectId: rooms.projectId })
+        .from(rooms)
+        .where(inArray(rooms.id, roomIds))
+        .all();
+      if (
+        references.length !== roomIds.length ||
+        references.some((reference) => reference.projectId !== projectId)
+      ) {
+        throw new Error("Distribution-board room reference is invalid.");
+      }
+    }
+  }
+
+  private assertIdsAvailable(
+    database: AppDatabase,
+    snapshot: DistributionBoardSubtreeSnapshot
+  ) {
+    const sectionIds = snapshot.sections.map((section) => section.id);
+    const componentIds = snapshot.components.map(
+      ({ component }) => component.id
+    );
+    const circuitIds = snapshot.circuits.map((circuit) => circuit.id);
+    const deviceRowIds = snapshot.circuits.flatMap((circuit) =>
+      circuit.deviceRows.map((row) => row.id)
+    );
+    const conflicts = [
+      database
+        .select({ id: distributionBoards.id })
+        .from(distributionBoards)
+        .where(eq(distributionBoards.id, snapshot.distributionBoard.id))
+        .get(),
+      database
+        .select({ id: circuitLists.id })
+        .from(circuitLists)
+        .where(eq(circuitLists.id, snapshot.circuitList.id))
+        .get(),
+      sectionIds.length === 0
+        ? undefined
+        : database
+            .select({ id: circuitSections.id })
+            .from(circuitSections)
+            .where(inArray(circuitSections.id, sectionIds))
+            .limit(1)
+            .get(),
+      componentIds.length === 0
+        ? undefined
+        : database
+            .select({ id: distributionBoardComponents.id })
+            .from(distributionBoardComponents)
+            .where(inArray(distributionBoardComponents.id, componentIds))
+            .limit(1)
+            .get(),
+      circuitIds.length === 0
+        ? undefined
+        : database
+            .select({ id: circuits.id })
+            .from(circuits)
+            .where(inArray(circuits.id, circuitIds))
+            .limit(1)
+            .get(),
+      deviceRowIds.length === 0
+        ? undefined
+        : database
+            .select({ id: circuitDeviceRows.id })
+            .from(circuitDeviceRows)
+            .where(inArray(circuitDeviceRows.id, deviceRowIds))
+            .limit(1)
+            .get(),
+    ];
+    if (conflicts.some(Boolean)) {
+      throw new Error("Distribution-board subtree id already exists.");
+    }
+  }
+}
+
+function uniqueStrings(values: string[]) {
+  return [...new Set(values)];
+}
+
+function sameSnapshot(
+  left: DistributionBoardSubtreeSnapshot,
+  right: DistributionBoardSubtreeSnapshot
+) {
+  return canonicalJson(left) === canonicalJson(right);
+}
+
+function canonicalJson(value: unknown): string {
+  if (Array.isArray(value)) {
+    return `[${value.map(canonicalJson).join(",")}]`;
+  }
+  if (value !== null && typeof value === "object") {
+    return `{${Object.entries(value)
+      .sort(([left], [right]) => left.localeCompare(right))
+      .map(
+        ([key, child]) =>
+          `${JSON.stringify(key)}:${canonicalJson(child)}`
+      )
+      .join(",")}}`;
+  }
+  return JSON.stringify(value) ?? "null";
+}

src/db/repositories/floor.repository.ts

@@ -1,4 +1,4 @@
-import { asc, eq } from "drizzle-orm";
+import { and, asc, eq } from "drizzle-orm";
 import type { AppDatabase } from "../database-context.js";
 import { floors } from "../schema/floors.js";
 
@@ -13,4 +13,12 @@ export class FloorRepository {
       .where(eq(floors.projectId, projectId))
       .orderBy(asc(floors.sortOrder), asc(floors.name));
   }
+
+  async findById(projectId: string, floorId: string) {
+    return this.database
+      .select()
+      .from(floors)
+      .where(and(eq(floors.projectId, projectId), eq(floors.id, floorId)))
+      .get() ?? null;
+  }
 }

src/db/repositories/legacy-consumer-migration.repository.ts

@@ -1,142 +0,0 @@
-import crypto from "node:crypto";
-import { eq, inArray, isNull } from "drizzle-orm";
-import type {
-  LegacyMigrationCircuitInput,
-  LegacyMigrationReportInput,
-} from "../../domain/ports/legacy-consumer-migration.store.js";
-import type { AppDatabase } from "../database-context.js";
-import { circuitDeviceRows } from "../schema/circuit-device-rows.js";
-import { circuits } from "../schema/circuits.js";
-import { consumers } from "../schema/consumers.js";
-import { legacyConsumerCircuitMigrations } from "../schema/legacy-consumer-circuit-migrations.js";
-import { legacyConsumerMigrationReports } from "../schema/legacy-consumer-migration-report.js";
-import { toCircuitDeviceRowCreateValues } from "./circuit-device-row.persistence.js";
-import { toCircuitCreateValues } from "./circuit.persistence.js";
-
-export class LegacyConsumerMigrationRepository {
-  constructor(private readonly database: AppDatabase) {}
-
-  async listSourceConsumersByCircuitList(circuitListId: string) {
-    return this.database
-      .select()
-      .from(consumers)
-      .where(eq(consumers.circuitListId, circuitListId));
-  }
-
-  async listUnmigratedConsumers() {
-    return this.database
-      .select({
-        id: consumers.id,
-        projectId: consumers.projectId,
-        circuitListId: consumers.circuitListId,
-      })
-      .from(consumers)
-      .leftJoin(
-        legacyConsumerCircuitMigrations,
-        eq(legacyConsumerCircuitMigrations.consumerId, consumers.id)
-      )
-      .where(isNull(legacyConsumerCircuitMigrations.consumerId));
-  }
-
-  async listMigratedConsumerIds(circuitListId: string) {
-    const rows = await this.database
-      .select({ consumerId: legacyConsumerCircuitMigrations.consumerId })
-      .from(legacyConsumerCircuitMigrations)
-      .where(eq(legacyConsumerCircuitMigrations.circuitListId, circuitListId));
-    return rows.map((row) => row.consumerId);
-  }
-
-  persistCircuitListMigration(input: {
-    circuitListId: string;
-    circuits: LegacyMigrationCircuitInput[];
-    report: LegacyMigrationReportInput;
-  }) {
-    if (input.circuits.some((entry) => entry.circuit.circuitListId !== input.circuitListId)) {
-      throw new Error("All migrated circuits must belong to the target circuit list.");
-    }
-
-    const consumerIds = input.circuits.flatMap((entry) =>
-      entry.deviceRows.map((row) => row.legacyConsumerId)
-    );
-    if (new Set(consumerIds).size !== consumerIds.length) {
-      throw new Error("A legacy consumer may only be migrated once per operation.");
-    }
-
-    const preparedCircuits = input.circuits.map((entry) => {
-      const circuitId = crypto.randomUUID();
-      return {
-        circuitId,
-        circuitValues: toCircuitCreateValues(circuitId, entry.circuit),
-        rows: entry.deviceRows.map((row) => {
-          const rowId = crypto.randomUUID();
-          return {
-            consumerId: row.legacyConsumerId,
-            rowId,
-            rowValues: toCircuitDeviceRowCreateValues(rowId, {
-              ...row,
-              circuitId,
-            }),
-          };
-        }),
-      };
-    });
-    const createdAtIso = new Date().toISOString();
-
-    this.database.transaction((tx) => {
-      if (consumerIds.length > 0) {
-        const existingMappings = tx
-          .select({ consumerId: legacyConsumerCircuitMigrations.consumerId })
-          .from(legacyConsumerCircuitMigrations)
-          .where(inArray(legacyConsumerCircuitMigrations.consumerId, consumerIds))
-          .all();
-        if (existingMappings.length > 0) {
-          throw new Error("A legacy consumer was migrated before this operation completed.");
-        }
-      }
-
-      for (const preparedCircuit of preparedCircuits) {
-        tx.insert(circuits).values(preparedCircuit.circuitValues).run();
-        for (const row of preparedCircuit.rows) {
-          tx.insert(circuitDeviceRows).values(row.rowValues).run();
-          tx
-            .insert(legacyConsumerCircuitMigrations)
-            .values({
-              consumerId: row.consumerId,
-              circuitId: preparedCircuit.circuitId,
-              circuitDeviceRowId: row.rowId,
-              circuitListId: input.circuitListId,
-              createdAtIso,
-            })
-            .run();
-        }
-      }
-
-      const reportValues = {
-        ...input.report,
-        createdAtIso,
-      };
-      const existingReport = tx
-        .select({ id: legacyConsumerMigrationReports.id })
-        .from(legacyConsumerMigrationReports)
-        .where(eq(legacyConsumerMigrationReports.circuitListId, input.circuitListId))
-        .limit(1)
-        .all();
-      if (existingReport.length > 0) {
-        tx
-          .update(legacyConsumerMigrationReports)
-          .set(reportValues)
-          .where(eq(legacyConsumerMigrationReports.id, existingReport[0].id))
-          .run();
-      } else {
-        tx
-          .insert(legacyConsumerMigrationReports)
-          .values({
-            id: crypto.randomUUID(),
-            circuitListId: input.circuitListId,
-            ...reportValues,
-          })
-          .run();
-      }
-    });
-  }
-}

src/db/repositories/project-device-structure-project-command.repository.ts

@@ -34,7 +34,6 @@ const circuitDeviceRowSnapshotFields = [
   "id",
   "circuitId",
   "linkedProjectDeviceId",
-  "legacyConsumerId",
   "sortOrder",
   "name",
   "displayName",

src/db/repositories/project-location-structure-project-command.repository.ts

@@ -2,16 +2,22 @@ import { and, eq } from "drizzle-orm";
 import {
   assertProjectFloorDeleteProjectCommand,
   assertProjectFloorInsertProjectCommand,
+  assertProjectFloorUpdateProjectCommand,
   assertProjectRoomDeleteProjectCommand,
   assertProjectRoomInsertProjectCommand,
+  assertProjectRoomUpdateProjectCommand,
   createProjectFloorDeleteProjectCommand,
   createProjectFloorInsertProjectCommand,
+  createProjectFloorUpdateProjectCommand,
   createProjectRoomDeleteProjectCommand,
   createProjectRoomInsertProjectCommand,
+  createProjectRoomUpdateProjectCommand,
   projectFloorDeleteCommandType,
   projectFloorInsertCommandType,
+  projectFloorUpdateCommandType,
   projectRoomDeleteCommandType,
   projectRoomInsertCommandType,
+  projectRoomUpdateCommandType,
   type ProjectFloorSnapshot,
   type ProjectLocationStructureProjectCommand,
   type ProjectRoomSnapshot,
@@ -22,7 +28,6 @@ import type {
 } from "../../domain/ports/project-location-structure-project-command.store.js";
 import type { AppDatabase } from "../database-context.js";
 import { circuitDeviceRows } from "../schema/circuit-device-rows.js";
-import { consumers } from "../schema/consumers.js";
 import { floors } from "../schema/floors.js";
 import { distributionBoards } from "../schema/distribution-boards.js";
 import { projects } from "../schema/projects.js";
@@ -63,6 +68,9 @@ export class ProjectLocationStructureProjectCommandRepository
           projectId,
           command.payload.floor
         );
+      case projectFloorUpdateCommandType:
+        assertProjectFloorUpdateProjectCommand(command);
+        return this.updateFloor(database, projectId, command.payload.expected, command.payload.target);
       case projectRoomInsertCommandType:
         assertProjectRoomInsertProjectCommand(command);
         return this.insertRoom(
@@ -77,6 +85,9 @@ export class ProjectLocationStructureProjectCommandRepository
           projectId,
           command.payload.room
         );
+      case projectRoomUpdateCommandType:
+        assertProjectRoomUpdateProjectCommand(command);
+        return this.updateRoom(database, projectId, command.payload.expected, command.payload.target);
     }
   }
 
@@ -127,7 +138,7 @@ export class ProjectLocationStructureProjectCommandRepository
       .get();
     if (referencedRoom) {
       throw new Error(
-        "A project floor with assigned rooms cannot be removed by history."
+        "Die Etage kann nicht gelöscht werden, solange Räume zugeordnet sind."
       );
     }
     const referencedDistributionBoard = database
@@ -138,7 +149,7 @@ export class ProjectLocationStructureProjectCommandRepository
       .get();
     if (referencedDistributionBoard) {
       throw new Error(
-        "A project floor assigned to a distribution board cannot be removed by history."
+        "Die Etage kann nicht gelöscht werden, solange eine Verteilung zugeordnet ist."
       );
     }
     const deleted = database
@@ -192,6 +203,70 @@ export class ProjectLocationStructureProjectCommandRepository
     return createProjectRoomDeleteProjectCommand(room);
   }
 
+  private updateFloor(
+    database: AppDatabase,
+    projectId: string,
+    expected: ProjectFloorSnapshot,
+    target: ProjectFloorSnapshot
+  ) {
+    const persisted = database
+      .select()
+      .from(floors)
+      .where(and(eq(floors.id, expected.id), eq(floors.projectId, projectId)))
+      .get();
+    if (!persisted || !sameRecord(expected, persisted)) {
+      throw new Error("Project floor changed before update.");
+    }
+    const updated = database
+      .update(floors)
+      .set({ name: target.name })
+      .where(and(eq(floors.id, expected.id), eq(floors.projectId, projectId)))
+      .run();
+    if (updated.changes !== 1) {
+      throw new Error("Die Etage konnte nicht aktualisiert werden.");
+    }
+    return createProjectFloorUpdateProjectCommand(target, expected);
+  }
+
+  private updateRoom(
+    database: AppDatabase,
+    projectId: string,
+    expected: ProjectRoomSnapshot,
+    target: ProjectRoomSnapshot
+  ) {
+    const persisted = database
+      .select()
+      .from(rooms)
+      .where(and(eq(rooms.id, expected.id), eq(rooms.projectId, projectId)))
+      .get();
+    if (!persisted || !sameRecord(expected, persisted)) {
+      throw new Error("Project room changed before update.");
+    }
+    if (target.floorId) {
+      const targetFloor = database
+        .select({ id: floors.id })
+        .from(floors)
+        .where(and(eq(floors.id, target.floorId), eq(floors.projectId, projectId)))
+        .get();
+      if (!targetFloor) {
+        throw new Error("Project room references a foreign floor.");
+      }
+    }
+    const updated = database
+      .update(rooms)
+      .set({
+        floorId: target.floorId,
+        roomNumber: target.roomNumber,
+        roomName: target.roomName,
+      })
+      .where(and(eq(rooms.id, expected.id), eq(rooms.projectId, projectId)))
+      .run();
+    if (updated.changes !== 1) {
+      throw new Error("Der Raum konnte nicht aktualisiert werden.");
+    }
+    return createProjectRoomUpdateProjectCommand(target, expected);
+  }
+
   private deleteRoom(
     database: AppDatabase,
     projectId: string,
@@ -216,15 +291,9 @@ export class ProjectLocationStructureProjectCommandRepository
       .where(eq(circuitDeviceRows.roomId, expected.id))
       .limit(1)
       .get();
-    const referencedLegacyConsumer = database
+    if (referencedDeviceRow) {
-      .select({ id: consumers.id })
-      .from(consumers)
-      .where(eq(consumers.roomId, expected.id))
-      .limit(1)
-      .get();
-    if (referencedDeviceRow || referencedLegacyConsumer) {
       throw new Error(
-        "A referenced project room cannot be removed by history."
+        "Der Raum kann nicht gelöscht werden, solange er in einem Stromkreis verwendet wird."
       );
     }
     const deleted = database

src/db/repositories/project-settings-project-command.repository.ts

@@ -2,9 +2,6 @@ import { and, eq, isNotNull } from "drizzle-orm";
 import {
   assertProjectSettingsUpdateProjectCommand,
   createProjectSettingsUpdateProjectCommand,
-  legacyProjectSettingsUpdateCommandSchemaVersion,
-  normalizeProjectSettingsValues,
-  previousProjectSettingsUpdateCommandSchemaVersion,
   type ProjectSettingsValues,
 } from "../../domain/models/project-settings-project-command.model.js";
 import type {
@@ -43,49 +40,22 @@ export class ProjectSettingsProjectCommandRepository
     if (!current) {
       throw new Error("Project not found.");
     }
-    const target = normalizeProjectSettingsValues(input.command, current);
+    const target = input.command.payload;
     if (projectSettingsEqual(current, target)) {
       throw new Error("Project settings did not change.");
     }
 
-    const inverse =
+    const inverse = createProjectSettingsUpdateProjectCommand({
-      input.command.schemaVersion ===
+      name: current.name,
-      legacyProjectSettingsUpdateCommandSchemaVersion
+      internalProjectNumber: current.internalProjectNumber,
-        ? {
+      externalProjectNumber: current.externalProjectNumber,
-            schemaVersion: legacyProjectSettingsUpdateCommandSchemaVersion,
+      buildingOwner: current.buildingOwner,
-            type: input.command.type,
+      description: current.description,
-            payload: {
+      singlePhaseVoltageV: current.singlePhaseVoltageV,
-              singlePhaseVoltageV: current.singlePhaseVoltageV,
+      threePhaseVoltageV: current.threePhaseVoltageV,
-              threePhaseVoltageV: current.threePhaseVoltageV,
+      enabledDistributionBoardSupplyTypes:
-            },
+        current.enabledDistributionBoardSupplyTypes,
-          }
+    });
-        : input.command.schemaVersion ===
-            previousProjectSettingsUpdateCommandSchemaVersion
-          ? {
-              schemaVersion:
-                previousProjectSettingsUpdateCommandSchemaVersion,
-              type: input.command.type,
-              payload: {
-                name: current.name,
-                internalProjectNumber: current.internalProjectNumber,
-                externalProjectNumber: current.externalProjectNumber,
-                buildingOwner: current.buildingOwner,
-                description: current.description,
-                singlePhaseVoltageV: current.singlePhaseVoltageV,
-                threePhaseVoltageV: current.threePhaseVoltageV,
-              },
-            }
-          : createProjectSettingsUpdateProjectCommand({
-            name: current.name,
-            internalProjectNumber: current.internalProjectNumber,
-            externalProjectNumber: current.externalProjectNumber,
-            buildingOwner: current.buildingOwner,
-            description: current.description,
-            singlePhaseVoltageV: current.singlePhaseVoltageV,
-            threePhaseVoltageV: current.threePhaseVoltageV,
-            enabledDistributionBoardSupplyTypes:
-              current.enabledDistributionBoardSupplyTypes,
-          });
     assertDisabledSupplyTypesAreUnused(tx, input.projectId, target);
     const updated = tx
       .update(projects)

src/db/repositories/project-snapshot.repository.ts

@@ -4,14 +4,8 @@ import { ProjectRevisionConflictError } from "../../domain/errors/project-revisi
 import { ProjectSnapshotNameConflictError } from "../../domain/errors/project-snapshot-name-conflict.error.js";
 import { createProjectStateRestoreCommand } from "../../domain/models/project-state-restore-command.model.js";
 import {
-  distributionBoardProjectStateSnapshotSchemaVersion,
   deserializeProjectStateSnapshot,
-  legacyProjectStateSnapshotSchemaVersion,
-  previousProjectStateSnapshotSchemaVersion,
   projectStateSnapshotSchemaVersion,
-  simultaneityFactorProjectStateSnapshotSchemaVersion,
-  supplyTypesProjectStateSnapshotSchemaVersion,
-  voltageProjectStateSnapshotSchemaVersion,
 } from "../../domain/models/project-state-snapshot.model.js";
 import type {
   CreateNamedProjectSnapshotInput,
@@ -144,19 +138,7 @@ export class ProjectSnapshotRepository implements ProjectSnapshotStore {
     if (actualChecksum !== stored.payloadSha256) {
       throw new Error("Project snapshot checksum verification failed.");
     }
-    if (
+    if (stored.schemaVersion !== projectStateSnapshotSchemaVersion) {
-      stored.schemaVersion !== legacyProjectStateSnapshotSchemaVersion &&
-      stored.schemaVersion !== previousProjectStateSnapshotSchemaVersion &&
-      stored.schemaVersion !==
-        distributionBoardProjectStateSnapshotSchemaVersion &&
-      stored.schemaVersion !==
-        supplyTypesProjectStateSnapshotSchemaVersion &&
-      stored.schemaVersion !==
-        voltageProjectStateSnapshotSchemaVersion &&
-      stored.schemaVersion !==
-        simultaneityFactorProjectStateSnapshotSchemaVersion &&
-      stored.schemaVersion !== projectStateSnapshotSchemaVersion
-    ) {
       throw new Error("Project snapshot schema version is not supported.");
     }
     const targetState = deserializeProjectStateSnapshot(stored.payloadJson);

src/db/repositories/project-state-restore-command.repository.ts

@@ -18,13 +18,10 @@ import { circuitLists } from "../schema/circuit-lists.js";
 import { circuitProtectionDevices } from "../schema/circuit-protection-devices.js";
 import { circuitSections } from "../schema/circuit-sections.js";
 import { circuits } from "../schema/circuits.js";
-import { consumers } from "../schema/consumers.js";
 import { distributionBoardComponentProtectionDevices } from "../schema/distribution-board-component-protection-devices.js";
 import { distributionBoardComponents } from "../schema/distribution-board-components.js";
 import { distributionBoards } from "../schema/distribution-boards.js";
 import { floors } from "../schema/floors.js";
-import { legacyConsumerCircuitMigrations } from "../schema/legacy-consumer-circuit-migrations.js";
-import { legacyConsumerMigrationReports } from "../schema/legacy-consumer-migration-report.js";
 import { projectDevices } from "../schema/project-devices.js";
 import { projectChangeSets } from "../schema/project-change-sets.js";
 import { projects } from "../schema/projects.js";
@@ -186,10 +183,6 @@ function replaceProjectState(
   database: AppDatabase,
   state: ProjectStateSnapshot
 ) {
-  const upgradeOnlyData = captureUpgradeOnlyData(
-    database,
-    state.project.id
-  );
   database
     .delete(distributionBoards)
     .where(eq(distributionBoards.projectId, state.project.id))
@@ -257,136 +250,6 @@ function replaceProjectState(
     circuitDeviceRows,
     state.circuits.flatMap((circuit) => circuit.deviceRows)
   );
-  restoreCompatibleUpgradeOnlyData(database, state, upgradeOnlyData);
-}
-
-function captureUpgradeOnlyData(
-  database: AppDatabase,
-  projectId: string
-) {
-  const consumerLinks = database
-    .select({
-      id: consumers.id,
-      distributionBoardId: consumers.distributionBoardId,
-      circuitListId: consumers.circuitListId,
-      projectDeviceId: consumers.projectDeviceId,
-      roomId: consumers.roomId,
-    })
-    .from(consumers)
-    .where(eq(consumers.projectId, projectId))
-    .all();
-  const migrationMappings = database
-    .select({
-      consumerId: legacyConsumerCircuitMigrations.consumerId,
-      circuitId: legacyConsumerCircuitMigrations.circuitId,
-      circuitDeviceRowId:
-        legacyConsumerCircuitMigrations.circuitDeviceRowId,
-      circuitListId: legacyConsumerCircuitMigrations.circuitListId,
-      createdAtIso: legacyConsumerCircuitMigrations.createdAtIso,
-    })
-    .from(legacyConsumerCircuitMigrations)
-    .innerJoin(
-      circuitLists,
-      eq(
-        circuitLists.id,
-        legacyConsumerCircuitMigrations.circuitListId
-      )
-    )
-    .where(eq(circuitLists.projectId, projectId))
-    .all();
-  const migrationReports = database
-    .select({
-      id: legacyConsumerMigrationReports.id,
-      circuitListId: legacyConsumerMigrationReports.circuitListId,
-      legacyConsumerCount:
-        legacyConsumerMigrationReports.legacyConsumerCount,
-      createdCircuitCount:
-        legacyConsumerMigrationReports.createdCircuitCount,
-      createdDeviceRowCount:
-        legacyConsumerMigrationReports.createdDeviceRowCount,
-      duplicateGroupedCount:
-        legacyConsumerMigrationReports.duplicateGroupedCount,
-      generatedIdentifierCount:
-        legacyConsumerMigrationReports.generatedIdentifierCount,
-      unassignedRowCount:
-        legacyConsumerMigrationReports.unassignedRowCount,
-      warningsJson: legacyConsumerMigrationReports.warningsJson,
-      generatedIdentifiersJson:
-        legacyConsumerMigrationReports.generatedIdentifiersJson,
-      duplicateGroupsJson:
-        legacyConsumerMigrationReports.duplicateGroupsJson,
-      createdAtIso: legacyConsumerMigrationReports.createdAtIso,
-    })
-    .from(legacyConsumerMigrationReports)
-    .innerJoin(
-      circuitLists,
-      eq(circuitLists.id, legacyConsumerMigrationReports.circuitListId)
-    )
-    .where(eq(circuitLists.projectId, projectId))
-    .all();
-  return { consumerLinks, migrationMappings, migrationReports };
-}
-
-function restoreCompatibleUpgradeOnlyData(
-  database: AppDatabase,
-  state: ProjectStateSnapshot,
-  data: ReturnType<typeof captureUpgradeOnlyData>
-) {
-  const boardIds = new Set(
-    state.distributionBoards.map((entry) => entry.id)
-  );
-  const listIds = new Set(state.circuitLists.map((entry) => entry.id));
-  const deviceIds = new Set(
-    state.projectDevices.map((entry) => entry.id)
-  );
-  const roomIds = new Set(state.rooms.map((entry) => entry.id));
-  const circuitIds = new Set(state.circuits.map((entry) => entry.id));
-  const rowIds = new Set(
-    state.circuits.flatMap((circuit) =>
-      circuit.deviceRows.map((entry) => entry.id)
-    )
-  );
-
-  for (const link of data.consumerLinks) {
-    database
-      .update(consumers)
-      .set({
-        distributionBoardId:
-          link.distributionBoardId &&
-          boardIds.has(link.distributionBoardId)
-            ? link.distributionBoardId
-            : null,
-        circuitListId:
-          link.circuitListId && listIds.has(link.circuitListId)
-            ? link.circuitListId
-            : null,
-        projectDeviceId:
-          link.projectDeviceId && deviceIds.has(link.projectDeviceId)
-            ? link.projectDeviceId
-            : null,
-        roomId:
-          link.roomId && roomIds.has(link.roomId) ? link.roomId : null,
-      })
-      .where(eq(consumers.id, link.id))
-      .run();
-  }
-  insertMany(
-    database,
-    legacyConsumerCircuitMigrations,
-    data.migrationMappings.filter(
-      (entry) =>
-        listIds.has(entry.circuitListId) &&
-        circuitIds.has(entry.circuitId) &&
-        rowIds.has(entry.circuitDeviceRowId)
-    )
-  );
-  insertMany(
-    database,
-    legacyConsumerMigrationReports,
-    data.migrationReports.filter((entry) =>
-      listIds.has(entry.circuitListId)
-    )
-  );
 }
 
 function insertMany<TTable extends Parameters<AppDatabase["insert"]>[0]>(

src/db/repositories/project-state-snapshot.persistence.ts

@@ -145,9 +145,6 @@ export function readProjectStateSnapshot(
       equipmentIdentifier: circuits.equipmentIdentifier,
       displayName: circuits.displayName,
       sortOrder: circuits.sortOrder,
-      protectionType: circuits.protectionType,
-      protectionRatedCurrent: circuits.protectionRatedCurrent,
-      protectionCharacteristic: circuits.protectionCharacteristic,
       cableType: circuits.cableType,
       cableCrossSection: circuits.cableCrossSection,
       cableLength: circuits.cableLength,
@@ -173,7 +170,6 @@ export function readProjectStateSnapshot(
       id: circuitDeviceRows.id,
       circuitId: circuitDeviceRows.circuitId,
       linkedProjectDeviceId: circuitDeviceRows.linkedProjectDeviceId,
-      legacyConsumerId: circuitDeviceRows.legacyConsumerId,
       sortOrder: circuitDeviceRows.sortOrder,
       name: circuitDeviceRows.name,
       displayName: circuitDeviceRows.displayName,

src/db/repositories/room.repository.ts

@@ -1,4 +1,4 @@
-import { asc, eq } from "drizzle-orm";
+import { and, asc, eq } from "drizzle-orm";
 import type { AppDatabase } from "../database-context.js";
 import { rooms } from "../schema/rooms.js";
 
@@ -13,4 +13,12 @@ export class RoomRepository {
       .where(eq(rooms.projectId, projectId))
       .orderBy(asc(rooms.roomNumber), asc(rooms.roomName));
   }
+
+  async findById(projectId: string, roomId: string) {
+    return this.database
+      .select()
+      .from(rooms)
+      .where(and(eq(rooms.projectId, projectId), eq(rooms.id, roomId)))
+      .get() ?? null;
+  }
 }

src/db/schema/circuit-device-rows.ts

@@ -11,7 +11,6 @@ export const circuitDeviceRows = sqliteTable("circuit_device_rows", {
   linkedProjectDeviceId: text("linked_project_device_id").references(() => projectDevices.id, {
     onDelete: "set null",
   }),
-  legacyConsumerId: text("legacy_consumer_id"),
   sortOrder: integer("sort_order").notNull().default(0),
   name: text("name").notNull(),
   displayName: text("display_name").notNull(),

src/db/schema/circuits.ts

@@ -15,9 +15,6 @@ export const circuits = sqliteTable(
     equipmentIdentifier: text("equipment_identifier").notNull(),
     displayName: text("display_name"),
     sortOrder: integer("sort_order").notNull().default(0),
-    protectionType: text("protection_type"),
-    protectionRatedCurrent: real("protection_rated_current"),
-    protectionCharacteristic: text("protection_characteristic"),
     cableType: text("cable_type"),
     cableCrossSection: text("cable_cross_section"),
     cableLength: real("cable_length"),

src/db/schema/consumers.ts

@@ -1,47 +0,0 @@
-import { integer, real, sqliteTable, text } from "drizzle-orm/sqlite-core";
-import { circuitLists } from "./circuit-lists.js";
-import { distributionBoards } from "./distribution-boards.js";
-import { projectDevices } from "./project-devices.js";
-import { projects } from "./projects.js";
-import { rooms } from "./rooms.js";
-
-export const consumers = sqliteTable("consumers", {
-  id: text("id").primaryKey(),
-  projectId: text("project_id")
-    .notNull()
-    .references(() => projects.id, { onDelete: "cascade" }),
-  distributionBoardId: text("distribution_board_id").references(() => distributionBoards.id, {
-    onDelete: "set null",
-  }),
-  circuitListId: text("circuit_list_id").references(() => circuitLists.id, {
-    onDelete: "set null",
-  }),
-  projectDeviceId: text("project_device_id").references(() => projectDevices.id, {
-    onDelete: "set null",
-  }),
-  isLinkedToDevice: integer("is_linked_to_device").notNull().default(0),
-  roomId: text("room_id").references(() => rooms.id, {
-    onDelete: "set null",
-  }),
-  circuitNumber: text("circuit_number"),
-  description: text("description"),
-  name: text("name").notNull(),
-  category: text("category"),
-  deviceType: text("device_type"),
-  phaseType: text("phase_type"),
-  tradeOrCostGroup: text("trade_or_cost_group"),
-  group: text("group_name"),
-  protectionType: text("protection_type"),
-  protectionRatedCurrent: real("protection_rated_current"),
-  protectionCharacteristic: text("protection_characteristic"),
-  cableType: text("cable_type"),
-  cableCrossSection: text("cable_cross_section"),
-  comment: text("comment"),
-  quantity: integer("quantity").notNull(),
-  installedPowerPerUnitKw: real("installed_power_per_unit_kw").notNull(),
-  demandFactor: real("demand_factor").notNull(),
-  voltageV: real("voltage_v"),
-  phaseCount: integer("phase_count"),
-  powerFactor: real("power_factor"),
-  note: text("note"),
-});

src/db/schema/legacy-consumer-circuit-migrations.ts

@@ -1,19 +0,0 @@
-import { sqliteTable, text } from "drizzle-orm/sqlite-core";
-import { circuitDeviceRows } from "./circuit-device-rows.js";
-import { circuitLists } from "./circuit-lists.js";
-import { circuits } from "./circuits.js";
-
-export const legacyConsumerCircuitMigrations = sqliteTable("legacy_consumer_circuit_migrations", {
-  consumerId: text("consumer_id").primaryKey(),
-  circuitId: text("circuit_id")
-    .notNull()
-    .references(() => circuits.id, { onDelete: "cascade" }),
-  circuitDeviceRowId: text("circuit_device_row_id")
-    .notNull()
-    .references(() => circuitDeviceRows.id, { onDelete: "cascade" }),
-  circuitListId: text("circuit_list_id")
-    .notNull()
-    .references(() => circuitLists.id, { onDelete: "cascade" }),
-  createdAtIso: text("created_at_iso").notNull(),
-});
-

src/db/schema/legacy-consumer-migration-report.ts

@@ -1,24 +0,0 @@
-import { integer, sqliteTable, text, unique } from "drizzle-orm/sqlite-core";
-import { circuitLists } from "./circuit-lists.js";
-
-export const legacyConsumerMigrationReports = sqliteTable(
-  "legacy_consumer_migration_reports",
-  {
-    id: text("id").primaryKey(),
-    circuitListId: text("circuit_list_id")
-      .notNull()
-      .references(() => circuitLists.id, { onDelete: "cascade" }),
-    legacyConsumerCount: integer("legacy_consumer_count").notNull(),
-    createdCircuitCount: integer("created_circuit_count").notNull(),
-    createdDeviceRowCount: integer("created_device_row_count").notNull(),
-    duplicateGroupedCount: integer("duplicate_grouped_count").notNull(),
-    generatedIdentifierCount: integer("generated_identifier_count").notNull(),
-    unassignedRowCount: integer("unassigned_row_count").notNull(),
-    warningsJson: text("warnings_json").notNull(),
-    generatedIdentifiersJson: text("generated_identifiers_json").notNull(),
-    duplicateGroupsJson: text("duplicate_groups_json").notNull(),
-    createdAtIso: text("created_at_iso").notNull(),
-  },
-  (table) => [unique("legacy_consumer_migration_reports_list_unique").on(table.circuitListId)]
-);
-

src/domain/models/circuit-device-row-structure-project-command.model.ts

@@ -10,7 +10,6 @@ export interface CircuitDeviceRowSnapshot {
   id: string;
   circuitId: string;
   linkedProjectDeviceId: string | null;
-  legacyConsumerId: string | null;
   sortOrder: number;
   name: string;
   displayName: string;
@@ -101,7 +100,6 @@ export function assertCircuitDeviceRowInsertProjectCommand(
   assertNonEmptyString(row.id, "row.id");
   assertNonEmptyString(row.circuitId, "row.circuitId");
   assertNullableString(row.linkedProjectDeviceId, "row.linkedProjectDeviceId");
-  assertNullableString(row.legacyConsumerId, "row.legacyConsumerId");
   assertFiniteNumber(row.sortOrder, "row.sortOrder");
   assertNonEmptyString(row.name, "row.name");
   assertNonEmptyString(row.displayName, "row.displayName");

src/domain/models/circuit-device-row.model.ts

@@ -2,7 +2,6 @@ export interface CircuitDeviceRow {
   id: string;
   circuitId: string;
   linkedProjectDeviceId?: string;
-  legacyConsumerId?: string;
   sortOrder: number;
   name: string;
   displayName: string;

src/domain/models/circuit-project-command.model.ts

@@ -8,9 +8,6 @@ export interface CircuitUpdateValues {
   equipmentIdentifier: string;
   displayName: string | null;
   sortOrder: number;
-  protectionType: string | null;
-  protectionRatedCurrent: number | null;
-  protectionCharacteristic: string | null;
   cableType: string | null;
   cableCrossSection: string | null;
   cableLength: number | null;
@@ -118,7 +115,6 @@ function assertCircuitUpdateFieldValue(
     return;
   }
   if (
-    field === "protectionRatedCurrent" ||
     field === "cableLength" ||
     field === "voltage"
   ) {
@@ -147,9 +143,6 @@ function isCircuitUpdateField(value: string): value is CircuitUpdateField {
     "equipmentIdentifier",
     "displayName",
     "sortOrder",
-    "protectionType",
-    "protectionRatedCurrent",
-    "protectionCharacteristic",
     "cableType",
     "cableCrossSection",
     "cableLength",

src/domain/models/circuit-structure-project-command.model.ts

@@ -21,9 +21,6 @@ export interface CircuitSnapshot {
   equipmentIdentifier: string;
   displayName: string | null;
   sortOrder: number;
-  protectionType: string | null;
-  protectionRatedCurrent: number | null;
-  protectionCharacteristic: string | null;
   cableType: string | null;
   cableCrossSection: string | null;
   cableLength: number | null;
@@ -115,8 +112,6 @@ export function assertCircuitInsertProjectCommand(
   assertNullableString(circuit.displayName, "circuit.displayName");
   assertFiniteNumber(circuit.sortOrder, "circuit.sortOrder");
   for (const field of [
-    "protectionType",
-    "protectionCharacteristic",
     "cableType",
     "cableCrossSection",
     "rcdAssignment",
@@ -127,10 +122,6 @@ export function assertCircuitInsertProjectCommand(
   ] as const) {
     assertNullableString(circuit[field], `circuit.${field}`);
   }
-  assertNullableNonNegativeNumber(
-    circuit.protectionRatedCurrent,
-    "circuit.protectionRatedCurrent"
-  );
   assertNullableNonNegativeNumber(
     circuit.cableLength,
     "circuit.cableLength"

src/domain/models/circuit-tree.model.ts

@@ -1,7 +1,6 @@
 export interface CircuitTreeDeviceRow {
   id: string;
   linkedProjectDeviceId?: string;
-  legacyConsumerId?: string;
   sortOrder: number;
   name: string;
   displayName: string;
@@ -29,9 +28,6 @@ export interface CircuitTreeCircuit {
   equipmentIdentifier: string;
   displayName?: string;
   sortOrder: number;
-  protectionType?: string;
-  protectionRatedCurrent?: number;
-  protectionCharacteristic?: string;
   cableType?: string;
   cableCrossSection?: string;
   cableLength?: number;
@@ -73,17 +69,6 @@ export interface CircuitTreeResponse {
   footerComponents: CircuitTreeComponent[];
 }
 
-export interface LegacyMigrationReport {
-  circuitListId: string;
-  legacyConsumerCount: number;
-  createdCircuitCount: number;
-  createdDeviceRowCount: number;
-  groupedDuplicateCircuitNumbers: Array<{ normalizedCircuitNumber: string; count: number }>;
-  generatedIdentifiers: string[];
-  unassignedRows: Array<{ consumerId: string; reason: string }>;
-  warnings: string[];
-}
-
 import type { CircuitGroupCategory } from "../../shared/constants/circuit-group.js";
 import type {
   DistributionBoardComponentPlacement,

src/domain/models/circuit.model.ts

@@ -5,9 +5,6 @@ export interface Circuit {
   equipmentIdentifier: string;
   displayName?: string;
   sortOrder: number;
-  protectionType?: string;
-  protectionRatedCurrent?: number;
-  protectionCharacteristic?: string;
   cableType?: string;
   cableCrossSection?: string;
   cableLength?: number;

src/domain/models/distribution-board-project-command.model.ts

@@ -6,8 +6,7 @@ import type { SerializedProjectCommand } from "./project-command.model.js";
 
 export const distributionBoardUpdateCommandType =
   "distribution-board.update" as const;
-export const legacyDistributionBoardUpdateCommandSchemaVersion = 1 as const;
+export const distributionBoardUpdateCommandSchemaVersion = 1 as const;
-export const distributionBoardUpdateCommandSchemaVersion = 2 as const;
 
 export interface DistributionBoardUpdateValues {
   floorId: string | null;
@@ -33,27 +32,17 @@ export interface DistributionBoardUpdateCommandPayload {
   changes: DistributionBoardUpdateFieldChange[];
 }
 
-interface CurrentDistributionBoardUpdateProjectCommand
+export interface DistributionBoardUpdateProjectCommand
   extends SerializedProjectCommand<DistributionBoardUpdateCommandPayload> {
   schemaVersion: typeof distributionBoardUpdateCommandSchemaVersion;
   type: typeof distributionBoardUpdateCommandType;
 }
 
-interface LegacyDistributionBoardUpdateProjectCommand
-  extends SerializedProjectCommand<DistributionBoardUpdateCommandPayload> {
-  schemaVersion: typeof legacyDistributionBoardUpdateCommandSchemaVersion;
-  type: typeof distributionBoardUpdateCommandType;
-}
-
-export type DistributionBoardUpdateProjectCommand =
-  | CurrentDistributionBoardUpdateProjectCommand
-  | LegacyDistributionBoardUpdateProjectCommand;
-
 export function createDistributionBoardUpdateProjectCommand(
   distributionBoardId: string,
   patch: DistributionBoardUpdatePatch
-): CurrentDistributionBoardUpdateProjectCommand {
+): DistributionBoardUpdateProjectCommand {
-  const command: CurrentDistributionBoardUpdateProjectCommand = {
+  const command: DistributionBoardUpdateProjectCommand = {
     schemaVersion: distributionBoardUpdateCommandSchemaVersion,
     type: distributionBoardUpdateCommandType,
     payload: {
@@ -72,9 +61,7 @@ export function assertDistributionBoardUpdateProjectCommand(
   command: SerializedProjectCommand<unknown>
 ): asserts command is DistributionBoardUpdateProjectCommand {
   if (
-    (command.schemaVersion !==
+    command.schemaVersion !== distributionBoardUpdateCommandSchemaVersion ||
-      legacyDistributionBoardUpdateCommandSchemaVersion &&
-      command.schemaVersion !== distributionBoardUpdateCommandSchemaVersion) ||
     command.type !== distributionBoardUpdateCommandType ||
     !isPlainObject(command.payload)
   ) {
@@ -97,9 +84,7 @@ export function assertDistributionBoardUpdateProjectCommand(
       !isPlainObject(change) ||
       (change.field !== "floorId" &&
         change.field !== "supplyType" &&
-        (command.schemaVersion ===
+        change.field !== "simultaneityFactor") ||
-          legacyDistributionBoardUpdateCommandSchemaVersion ||
-          change.field !== "simultaneityFactor")) ||
       seen.has(change.field)
     ) {
       throw new Error(

src/domain/models/distribution-board-structure-project-command.model.ts

@@ -18,36 +18,7 @@ export const distributionBoardInsertCommandType =
   "distribution-board.insert" as const;
 export const distributionBoardDeleteCommandType =
   "distribution-board.delete" as const;
-export const legacyDistributionBoardStructureCommandSchemaVersion = 1 as const;
+export const distributionBoardStructureCommandSchemaVersion = 1 as const;
-export const previousDistributionBoardStructureCommandSchemaVersion = 2 as const;
-export const distributionBoardStructureCommandSchemaVersion = 3 as const;
-
-const legacyDefaultCircuitSectionDefinitions = [
-  {
-    key: "lighting",
-    displayName: "Lighting",
-    prefix: "-1F",
-    sortOrder: 10,
-  },
-  {
-    key: "single_phase",
-    displayName: "Single-phase circuits",
-    prefix: "-2F",
-    sortOrder: 20,
-  },
-  {
-    key: "three_phase",
-    displayName: "Three-phase circuits",
-    prefix: "-3F",
-    sortOrder: 30,
-  },
-  {
-    key: "unassigned",
-    displayName: "Unassigned",
-    prefix: "-UF",
-    sortOrder: 90,
-  },
-] as const;
 
 export const defaultCircuitSectionDefinitions = [
   {
@@ -76,31 +47,6 @@ export const defaultCircuitSectionDefinitions = [
   },
 ] as const;
 
-interface LegacyDistributionBoardStructureSnapshot {
-  distributionBoard: {
-    id: string;
-    projectId: string;
-    name: string;
-  };
-  circuitList: DistributionBoardStructureSnapshot["circuitList"];
-  sections: LegacyCircuitSectionSnapshot[];
-}
-
-interface PreviousDistributionBoardStructureSnapshot {
-  distributionBoard: DistributionBoardStructureSnapshot["distributionBoard"];
-  circuitList: DistributionBoardStructureSnapshot["circuitList"];
-  sections: LegacyCircuitSectionSnapshot[];
-}
-
-interface LegacyCircuitSectionSnapshot {
-  id: string;
-  circuitListId: string;
-  key: string;
-  displayName: string;
-  prefix: string;
-  sortOrder: number;
-}
-
 export interface DistributionBoardStructureSnapshot {
   distributionBoard: {
     id: string;
@@ -140,22 +86,15 @@ export interface DistributionBoardStructureSnapshot {
 export interface NormalizedDistributionBoardStructureSnapshot {
   distributionBoard: DistributionBoardStructureSnapshot["distributionBoard"];
   circuitList: DistributionBoardStructureSnapshot["circuitList"];
-  sections: Array<
+  sections: DistributionBoardStructureSnapshot["sections"];
-    LegacyCircuitSectionSnapshot & {
-      category: CircuitGroupCategory | null;
-      groupNumber: number | null;
-    }
-  >;
   components: DistributionBoardStructureSnapshot["components"];
 }
 
-interface DistributionBoardStructureCommandPayload<
+interface DistributionBoardStructureCommandPayload {
-  TStructure = DistributionBoardStructureSnapshot,
+  structure: DistributionBoardStructureSnapshot;
-> {
-  structure: TStructure;
 }
 
-interface CurrentDistributionBoardStructureProjectCommand
+interface DistributionBoardStructureProjectCommandBase
   extends SerializedProjectCommand<DistributionBoardStructureCommandPayload> {
   schemaVersion: typeof distributionBoardStructureCommandSchemaVersion;
   type:
@@ -163,41 +102,19 @@ interface CurrentDistributionBoardStructureProjectCommand
     | typeof distributionBoardDeleteCommandType;
 }
 
-interface LegacyDistributionBoardStructureProjectCommand
-  extends SerializedProjectCommand<
-    DistributionBoardStructureCommandPayload<LegacyDistributionBoardStructureSnapshot>
-  > {
-  schemaVersion: typeof legacyDistributionBoardStructureCommandSchemaVersion;
-  type:
-    | typeof distributionBoardInsertCommandType
-    | typeof distributionBoardDeleteCommandType;
-}
-
-interface PreviousDistributionBoardStructureProjectCommand
-  extends SerializedProjectCommand<
-    DistributionBoardStructureCommandPayload<PreviousDistributionBoardStructureSnapshot>
-  > {
-  schemaVersion: typeof previousDistributionBoardStructureCommandSchemaVersion;
-  type:
-    | typeof distributionBoardInsertCommandType
-    | typeof distributionBoardDeleteCommandType;
-}
-
 export interface DistributionBoardInsertProjectCommand
-  extends CurrentDistributionBoardStructureProjectCommand {
+  extends DistributionBoardStructureProjectCommandBase {
   type: typeof distributionBoardInsertCommandType;
 }
 
 export interface DistributionBoardDeleteProjectCommand
-  extends CurrentDistributionBoardStructureProjectCommand {
+  extends DistributionBoardStructureProjectCommandBase {
   type: typeof distributionBoardDeleteCommandType;
 }
 
 export type DistributionBoardStructureProjectCommand =
   | DistributionBoardInsertProjectCommand
-  | DistributionBoardDeleteProjectCommand
+  | DistributionBoardDeleteProjectCommand;
-  | PreviousDistributionBoardStructureProjectCommand
-  | LegacyDistributionBoardStructureProjectCommand;
 
 export function createDistributionBoardStructureSnapshot(
   projectId: string,
@@ -296,35 +213,6 @@ export function assertDistributionBoardDeleteProjectCommand(
 export function normalizeDistributionBoardStructureProjectCommand(
   command: DistributionBoardStructureProjectCommand
 ): NormalizedDistributionBoardStructureSnapshot {
-  if (
-    command.schemaVersion ===
-    legacyDistributionBoardStructureCommandSchemaVersion
-  ) {
-    return {
-      distributionBoard: {
-        ...command.payload.structure.distributionBoard,
-        floorId: null,
-        supplyType: null,
-      },
-      circuitList: command.payload.structure.circuitList,
-      sections: command.payload.structure.sections.map(
-        normalizeLegacySection
-      ),
-      components: [],
-    };
-  }
-  if (
-    command.schemaVersion ===
-    previousDistributionBoardStructureCommandSchemaVersion
-  ) {
-    return {
-      ...command.payload.structure,
-      sections: command.payload.structure.sections.map(
-        normalizeLegacySection
-      ),
-      components: [],
-    };
-  }
   return command.payload.structure;
 }
 
@@ -340,26 +228,10 @@ export function invertDistributionBoardStructureProjectCommand(
   } as DistributionBoardStructureProjectCommand;
 }
 
-function normalizeLegacySection(
-  section: LegacyCircuitSectionSnapshot
-): NormalizedDistributionBoardStructureSnapshot["sections"][number] {
-  const category =
-    section.key === "lighting" ||
-    section.key === "single_phase" ||
-    section.key === "three_phase"
-      ? section.key
-      : null;
-  return {
-    ...section,
-    category,
-    groupNumber: category === null ? null : 1,
-  };
-}
-
 export function assertDistributionBoardStructureSnapshot(
   structure: unknown
 ): asserts structure is DistributionBoardStructureSnapshot {
-  assertDistributionBoardStructureSnapshotVersion(structure, "current");
+  assertDistributionBoardStructureSnapshotVersion(structure);
 }
 
 function assertDistributionBoardStructureProjectCommand(
@@ -375,63 +247,36 @@ function assertDistributionBoardStructureProjectCommand(
   ) {
     throw new Error("Unsupported distribution-board structure command.");
   }
-  if (
-    command.schemaVersion ===
-    legacyDistributionBoardStructureCommandSchemaVersion
-  ) {
-    assertDistributionBoardStructureSnapshotVersion(
-      command.payload.structure,
-      "legacy"
-    );
-    return;
-  }
-  if (
-    command.schemaVersion ===
-    previousDistributionBoardStructureCommandSchemaVersion
-  ) {
-    assertDistributionBoardStructureSnapshotVersion(
-      command.payload.structure,
-      "previous"
-    );
-    return;
-  }
   if (
     command.schemaVersion !==
     distributionBoardStructureCommandSchemaVersion
   ) {
     throw new Error("Unsupported distribution-board structure command.");
   }
-  assertDistributionBoardStructureSnapshotVersion(
+  assertDistributionBoardStructureSnapshotVersion(command.payload.structure);
-    command.payload.structure,
-    "current"
-  );
 }
 
 function assertDistributionBoardStructureSnapshotVersion(
-  structure: unknown,
+  structure: unknown
-  version: "legacy" | "previous" | "current"
 ) {
-  const current = version === "current";
   if (
     !isPlainObject(structure) ||
-    Object.keys(structure).length !== (current ? 4 : 3)
+    Object.keys(structure).length !== 4
   ) {
     throw new Error("Distribution-board structure is invalid.");
   }
   const { distributionBoard, circuitList, sections, components } =
     structure;
-  const expectedSections = current
+  const expectedSections = defaultCircuitSectionDefinitions;
-    ? defaultCircuitSectionDefinitions
-    : legacyDefaultCircuitSectionDefinitions;
   if (
     !isPlainObject(distributionBoard) ||
-    Object.keys(distributionBoard).length !==
+    Object.keys(distributionBoard).length !== 5 ||
-      (version === "legacy" ? 3 : 5) ||
     !isPlainObject(circuitList) ||
     Object.keys(circuitList).length !== 4 ||
     !Array.isArray(sections) ||
     sections.length !== expectedSections.length ||
-    (current && (!Array.isArray(components) || components.length !== 2))
+    !Array.isArray(components) ||
+    components.length !== 2
   ) {
     throw new Error("Distribution-board structure is incomplete.");
   }
@@ -441,10 +286,8 @@ function assertDistributionBoardStructureSnapshotVersion(
       `distributionBoard.${field}`
     );
   }
-  if (version !== "legacy") {
+  assertNullableId(distributionBoard.floorId, "distributionBoard.floorId");
-    assertNullableId(distributionBoard.floorId, "distributionBoard.floorId");
+  assertNullableSupplyType(distributionBoard.supplyType);
-    assertNullableSupplyType(distributionBoard.supplyType);
-  }
   for (const [field, value] of Object.entries(circuitList)) {
     assertNonEmptyString(value, `circuitList.${field}`);
   }
@@ -462,7 +305,7 @@ function assertDistributionBoardStructureSnapshotVersion(
     const expected = expectedSections[index];
     if (
       !isPlainObject(section) ||
-      Object.keys(section).length !== (current ? 8 : 6)
+      Object.keys(section).length !== 8
     ) {
       throw new Error("Default circuit section is invalid.");
     }
@@ -477,10 +320,8 @@ function assertDistributionBoardStructureSnapshotVersion(
       section.displayName !== expected.displayName ||
       section.prefix !== expected.prefix ||
       section.sortOrder !== expected.sortOrder ||
-      (current &&
+      section.category !== expected.category ||
-        (!("category" in expected) ||
+      section.groupNumber !== expected.groupNumber
-          section.category !== expected.category ||
-          section.groupNumber !== expected.groupNumber))
     ) {
       throw new Error(
         "Distribution-board structure has invalid default sections."
@@ -488,9 +329,7 @@ function assertDistributionBoardStructureSnapshotVersion(
     }
   }
 
-  if (current) {
+  assertDefaultComponents(components, circuitList.id);
-    assertDefaultComponents(components, circuitList.id);
-  }
 }
 
 function assertDefaultComponents(

src/domain/models/distribution-board-subtree-project-command.model.ts

@@ -0,0 +1,86 @@
+import type { SerializedProjectCommand } from "./project-command.model.js";
+import {
+  assertDistributionBoardSubtreeSnapshot,
+  type DistributionBoardSubtreeSnapshot,
+} from "./distribution-board-subtree-snapshot.model.js";
+
+export const distributionBoardInsertSubtreeCommandType =
+  "distribution-board.insert-subtree" as const;
+export const distributionBoardDeleteSubtreeCommandType =
+  "distribution-board.delete-subtree" as const;
+export const distributionBoardSubtreeCommandSchemaVersion = 1 as const;
+
+interface Payload {
+  snapshot: DistributionBoardSubtreeSnapshot;
+}
+
+export interface DistributionBoardInsertSubtreeProjectCommand
+  extends SerializedProjectCommand<Payload> {
+  schemaVersion: typeof distributionBoardSubtreeCommandSchemaVersion;
+  type: typeof distributionBoardInsertSubtreeCommandType;
+}
+
+export interface DistributionBoardDeleteSubtreeProjectCommand
+  extends SerializedProjectCommand<Payload> {
+  schemaVersion: typeof distributionBoardSubtreeCommandSchemaVersion;
+  type: typeof distributionBoardDeleteSubtreeCommandType;
+}
+
+export type DistributionBoardSubtreeProjectCommand =
+  | DistributionBoardInsertSubtreeProjectCommand
+  | DistributionBoardDeleteSubtreeProjectCommand;
+
+export function createDistributionBoardInsertSubtreeProjectCommand(
+  snapshot: DistributionBoardSubtreeSnapshot
+): DistributionBoardInsertSubtreeProjectCommand {
+  const command: DistributionBoardInsertSubtreeProjectCommand = {
+    schemaVersion: distributionBoardSubtreeCommandSchemaVersion,
+    type: distributionBoardInsertSubtreeCommandType,
+    payload: { snapshot },
+  };
+  assertDistributionBoardInsertSubtreeProjectCommand(command);
+  return command;
+}
+
+export function createDistributionBoardDeleteSubtreeProjectCommand(
+  snapshot: DistributionBoardSubtreeSnapshot
+): DistributionBoardDeleteSubtreeProjectCommand {
+  const command: DistributionBoardDeleteSubtreeProjectCommand = {
+    schemaVersion: distributionBoardSubtreeCommandSchemaVersion,
+    type: distributionBoardDeleteSubtreeCommandType,
+    payload: { snapshot },
+  };
+  assertDistributionBoardDeleteSubtreeProjectCommand(command);
+  return command;
+}
+
+export function assertDistributionBoardInsertSubtreeProjectCommand(
+  command: SerializedProjectCommand<unknown>
+): asserts command is DistributionBoardInsertSubtreeProjectCommand {
+  assertCommand(command, distributionBoardInsertSubtreeCommandType);
+}
+
+export function assertDistributionBoardDeleteSubtreeProjectCommand(
+  command: SerializedProjectCommand<unknown>
+): asserts command is DistributionBoardDeleteSubtreeProjectCommand {
+  assertCommand(command, distributionBoardDeleteSubtreeCommandType);
+}
+
+function assertCommand(
+  command: SerializedProjectCommand<unknown>,
+  type: DistributionBoardSubtreeProjectCommand["type"]
+) {
+  if (
+    command.schemaVersion !== distributionBoardSubtreeCommandSchemaVersion ||
+    command.type !== type ||
+    !isPlainObject(command.payload) ||
+    Object.keys(command.payload).length !== 1
+  ) {
+    throw new Error("Unsupported distribution-board subtree command.");
+  }
+  assertDistributionBoardSubtreeSnapshot(command.payload.snapshot);
+}
+
+function isPlainObject(value: unknown): value is Record<string, unknown> {
+  return value !== null && typeof value === "object" && !Array.isArray(value);
+}

src/domain/models/distribution-board-subtree-snapshot.model.ts

@@ -0,0 +1,465 @@
+import crypto from "node:crypto";
+import {
+  circuitGroupCategories,
+  type CircuitGroupCategory,
+} from "../../shared/constants/circuit-group.js";
+import {
+  distributionBoardComponentPlacements,
+  distributionBoardComponentRoles,
+  type DistributionBoardComponentPlacement,
+  type DistributionBoardComponentRole,
+} from "../../shared/constants/distribution-board-component.js";
+import {
+  distributionBoardSupplyTypes,
+  type DistributionBoardSupplyType,
+} from "../../shared/constants/distribution-board.js";
+import type {
+  BreakerTripCharacteristic,
+  FuseUtilizationCategory,
+  ProtectionDeviceType,
+  RcdType,
+} from "../../shared/constants/protection-device.js";
+import { protectionDeviceConfigurationSchema } from "../../shared/validation/protection-device.schemas.js";
+import {
+  assertCircuitInsertProjectCommand,
+  circuitInsertCommandType,
+  circuitStructureCommandSchemaVersion,
+  type CircuitSnapshot,
+} from "./circuit-structure-project-command.model.js";
+
+export interface DistributionBoardSubtreeSectionSnapshot {
+  id: string;
+  circuitListId: string;
+  key: string;
+  displayName: string;
+  prefix: string;
+  sortOrder: number;
+  category: CircuitGroupCategory | null;
+  groupNumber: number | null;
+}
+
+export interface DistributionBoardSubtreeComponentProtectionSnapshot {
+  componentId: string;
+  type: ProtectionDeviceType;
+  ratedCurrentA: number;
+  fuseUtilizationCategory: FuseUtilizationCategory | null;
+  tripCharacteristic: BreakerTripCharacteristic | null;
+  rcdType: RcdType | null;
+  ratedResidualCurrentMa: number | null;
+}
+
+export interface DistributionBoardSubtreeComponentSnapshot {
+  component: {
+    id: string;
+    circuitListId: string;
+    sectionId: string | null;
+    equipmentIdentifier: string;
+    name: string;
+    role: DistributionBoardComponentRole;
+    placement: DistributionBoardComponentPlacement;
+    sortOrder: number;
+  };
+  protectionDevice:
+    | DistributionBoardSubtreeComponentProtectionSnapshot
+    | null;
+}
+
+export interface DistributionBoardSubtreeSnapshot {
+  distributionBoard: {
+    id: string;
+    projectId: string;
+    name: string;
+    floorId: string | null;
+    supplyType: DistributionBoardSupplyType | null;
+    simultaneityFactor: number;
+  };
+  circuitList: {
+    id: string;
+    projectId: string;
+    distributionBoardId: string;
+    name: string;
+  };
+  sections: DistributionBoardSubtreeSectionSnapshot[];
+  components: DistributionBoardSubtreeComponentSnapshot[];
+  circuits: CircuitSnapshot[];
+}
+
+export function cloneDistributionBoardSubtree(
+  source: DistributionBoardSubtreeSnapshot,
+  name: string,
+  createId: () => string = () => crypto.randomUUID()
+): DistributionBoardSubtreeSnapshot {
+  assertDistributionBoardSubtreeSnapshot(source);
+  const normalizedName = name.trim();
+  assertNonEmptyString(normalizedName, "name");
+
+  const distributionBoardId = createId();
+  const circuitListId = distributionBoardId;
+  const sectionIds = new Map(
+    source.sections.map((section) => [section.id, createId()])
+  );
+  const circuitIds = new Map(
+    source.circuits.map((circuit) => [circuit.id, createId()])
+  );
+  const componentIds = new Map(
+    source.components.map(({ component }) => [component.id, createId()])
+  );
+
+  const clone: DistributionBoardSubtreeSnapshot = {
+    distributionBoard: {
+      ...source.distributionBoard,
+      id: distributionBoardId,
+      name: normalizedName,
+    },
+    circuitList: {
+      ...source.circuitList,
+      id: circuitListId,
+      distributionBoardId,
+      name: `${normalizedName} Stromkreisliste`,
+    },
+    sections: source.sections.map((section) => ({
+      ...section,
+      id: requiredMappedId(sectionIds, section.id),
+      circuitListId,
+    })),
+    components: source.components.map(
+      ({ component, protectionDevice }) => {
+        const componentId = requiredMappedId(
+          componentIds,
+          component.id
+        );
+        return {
+          component: {
+            ...component,
+            id: componentId,
+            circuitListId,
+            sectionId:
+              component.sectionId === null
+                ? null
+                : requiredMappedId(sectionIds, component.sectionId),
+          },
+          protectionDevice:
+            protectionDevice === null
+              ? null
+              : { ...protectionDevice, componentId },
+        };
+      }
+    ),
+    circuits: source.circuits.map((circuit) => {
+      const circuitId = requiredMappedId(circuitIds, circuit.id);
+      return {
+        ...circuit,
+        id: circuitId,
+        circuitListId,
+        sectionId: requiredMappedId(sectionIds, circuit.sectionId),
+        deviceRows: circuit.deviceRows.map((row) => ({
+          ...row,
+          id: createId(),
+          circuitId,
+        })),
+        protectionDevice:
+          circuit.protectionDevice === null ||
+          circuit.protectionDevice === undefined
+            ? null
+            : { ...circuit.protectionDevice, circuitId },
+      };
+    }),
+  };
+  assertDistributionBoardSubtreeSnapshot(clone);
+  return clone;
+}
+
+export function assertDistributionBoardSubtreeSnapshot(
+  value: unknown
+): asserts value is DistributionBoardSubtreeSnapshot {
+  if (
+    !isPlainObject(value) ||
+    Object.keys(value).length !== 5 ||
+    !isPlainObject(value.distributionBoard) ||
+    !isPlainObject(value.circuitList) ||
+    !Array.isArray(value.sections) ||
+    !Array.isArray(value.components) ||
+    !Array.isArray(value.circuits)
+  ) {
+    throw new Error("Distribution-board subtree snapshot is invalid.");
+  }
+  const board = value.distributionBoard;
+  const list = value.circuitList;
+  for (const field of ["id", "projectId", "name"] as const) {
+    assertNonEmptyString(board[field], `distributionBoard.${field}`);
+  }
+  assertNullableString(board.floorId, "distributionBoard.floorId");
+  if (
+    board.supplyType !== null &&
+    !distributionBoardSupplyTypes.includes(
+      board.supplyType as DistributionBoardSupplyType
+    )
+  ) {
+    throw new Error("Distribution-board supply type is invalid.");
+  }
+  assertFiniteNumber(
+    board.simultaneityFactor,
+    "distributionBoard.simultaneityFactor"
+  );
+  if (board.simultaneityFactor < 0 || board.simultaneityFactor > 1) {
+    throw new Error("Distribution-board simultaneity factor is invalid.");
+  }
+  for (const field of [
+    "id",
+    "projectId",
+    "distributionBoardId",
+    "name",
+  ] as const) {
+    assertNonEmptyString(list[field], `circuitList.${field}`);
+  }
+  const circuitListId = list.id;
+  assertNonEmptyString(circuitListId, "circuitList.id");
+  if (
+    list.projectId !== board.projectId ||
+    list.distributionBoardId !== board.id
+  ) {
+    throw new Error("Distribution-board circuit list ownership is invalid.");
+  }
+
+  const sectionIds = new Set<string>();
+  const sectionKeys = new Set<string>();
+  const sectionPrefixes = new Set<string>();
+  const categoryGroups = new Set<string>();
+  for (const section of value.sections) {
+    assertSection(section, circuitListId);
+    registerUnique(sectionIds, section.id, "circuit-section id");
+    registerUnique(sectionKeys, section.key, "circuit-section key");
+    registerUnique(sectionPrefixes, section.prefix, "circuit-section prefix");
+    if (section.category !== null && section.groupNumber !== null) {
+      registerUnique(
+        categoryGroups,
+        `${section.category}:${section.groupNumber}`,
+        "circuit-group number"
+      );
+    }
+  }
+
+  const equipmentIdentifiers = new Set<string>();
+  const componentIds = new Set<string>();
+  const fixedRoles = new Set<string>();
+  const groupRoles = new Set<string>();
+  for (const entry of value.components) {
+    assertComponent(entry, circuitListId, sectionIds);
+    const component = entry.component;
+    registerUnique(componentIds, component.id, "component id");
+    registerEquipmentIdentifier(
+      equipmentIdentifiers,
+      component.equipmentIdentifier
+    );
+    if (
+      component.role === "main_switch" ||
+      component.role === "surge_protective_device"
+    ) {
+      registerUnique(fixedRoles, component.role, "fixed component role");
+    }
+    if (
+      component.role === "group_upstream_protection" ||
+      component.role === "group_residual_current_protection"
+    ) {
+      registerUnique(
+        groupRoles,
+        `${component.sectionId}:${component.role}`,
+        "group component role"
+      );
+    }
+  }
+
+  const circuitIds = new Set<string>();
+  const deviceRowIds = new Set<string>();
+  for (const circuit of value.circuits) {
+    assertCircuitInsertProjectCommand({
+      schemaVersion: circuitStructureCommandSchemaVersion,
+      type: circuitInsertCommandType,
+      payload: { circuit },
+    });
+    if (
+      circuit.circuitListId !== circuitListId ||
+      !sectionIds.has(circuit.sectionId) ||
+      !("protectionDevice" in circuit)
+    ) {
+      throw new Error("Distribution-board circuit ownership is invalid.");
+    }
+    registerUnique(circuitIds, circuit.id, "circuit id");
+    registerEquipmentIdentifier(
+      equipmentIdentifiers,
+      circuit.equipmentIdentifier
+    );
+    for (const row of circuit.deviceRows) {
+      registerUnique(deviceRowIds, row.id, "device-row id");
+    }
+  }
+}
+
+function assertSection(
+  value: unknown,
+  circuitListId: string
+): asserts value is DistributionBoardSubtreeSectionSnapshot {
+  if (!isPlainObject(value) || Object.keys(value).length !== 8) {
+    throw new Error("Distribution-board circuit section is invalid.");
+  }
+  for (const field of ["id", "circuitListId", "key", "displayName", "prefix"] as const) {
+    assertNonEmptyString(value[field], `section.${field}`);
+  }
+  assertFiniteNumber(value.sortOrder, "section.sortOrder");
+  if (value.circuitListId !== circuitListId) {
+    throw new Error("Distribution-board section belongs to another list.");
+  }
+  if (
+    value.category === null
+      ? value.groupNumber !== null
+      : !circuitGroupCategories.includes(
+          value.category as CircuitGroupCategory
+        ) ||
+        !Number.isInteger(value.groupNumber) ||
+        (value.groupNumber as number) <= 0
+  ) {
+    throw new Error("Distribution-board circuit group is invalid.");
+  }
+}
+
+function assertComponent(
+  value: unknown,
+  circuitListId: string,
+  sectionIds: ReadonlySet<string>
+): asserts value is DistributionBoardSubtreeComponentSnapshot {
+  if (
+    !isPlainObject(value) ||
+    Object.keys(value).length !== 2 ||
+    !isPlainObject(value.component)
+  ) {
+    throw new Error("Distribution-board component snapshot is invalid.");
+  }
+  const component = value.component;
+  for (const field of ["id", "circuitListId", "equipmentIdentifier", "name"] as const) {
+    assertNonEmptyString(component[field], `component.${field}`);
+  }
+  if (
+    component.circuitListId !== circuitListId ||
+    !distributionBoardComponentRoles.includes(
+      component.role as DistributionBoardComponentRole
+    ) ||
+    !distributionBoardComponentPlacements.includes(
+      component.placement as DistributionBoardComponentPlacement
+    )
+  ) {
+    throw new Error("Distribution-board component values are invalid.");
+  }
+  assertFiniteNumber(component.sortOrder, "component.sortOrder");
+  assertNullableString(component.sectionId, "component.sectionId");
+  const fixed =
+    component.role === "main_switch" ||
+    component.role === "surge_protective_device";
+  const grouped =
+    component.role === "group_upstream_protection" ||
+    component.role === "group_residual_current_protection";
+  if (
+    (fixed &&
+      (component.placement !== "header" || component.sectionId !== null)) ||
+    (grouped &&
+      (component.placement !== "group" ||
+        typeof component.sectionId !== "string" ||
+        !sectionIds.has(component.sectionId))) ||
+    (component.role === "auxiliary" &&
+      (component.placement !== "footer" || component.sectionId !== null))
+  ) {
+    throw new Error("Distribution-board component placement is invalid.");
+  }
+  if (value.protectionDevice === null) {
+    if (grouped) {
+      throw new Error("Group protection component lacks protection data.");
+    }
+    return;
+  }
+  if (!grouped || !isPlainObject(value.protectionDevice)) {
+    throw new Error("Component protection data is invalid.");
+  }
+  const protection = value.protectionDevice;
+  if (
+    protection.componentId !== component.id ||
+    !protectionDeviceConfigurationSchema.safeParse({
+      type: protection.type,
+      ratedCurrentA: protection.ratedCurrentA,
+      ...(protection.fuseUtilizationCategory === null
+        ? {}
+        : { fuseUtilizationCategory: protection.fuseUtilizationCategory }),
+      ...(protection.tripCharacteristic === null
+        ? {}
+        : { tripCharacteristic: protection.tripCharacteristic }),
+      ...(protection.rcdType === null ? {} : { rcdType: protection.rcdType }),
+      ...(protection.ratedResidualCurrentMa === null
+        ? {}
+        : { ratedResidualCurrentMa: protection.ratedResidualCurrentMa }),
+    }).success
+  ) {
+    throw new Error("Component protection configuration is invalid.");
+  }
+}
+
+function requiredMappedId(
+  ids: ReadonlyMap<string, string>,
+  sourceId: string
+) {
+  const id = ids.get(sourceId);
+  if (!id) {
+    throw new Error("Distribution-board copy reference is invalid.");
+  }
+  return id;
+}
+
+function registerEquipmentIdentifier(
+  identifiers: Set<string>,
+  value: string
+) {
+  registerUnique(
+    identifiers,
+    value.trim().toLocaleLowerCase("de"),
+    "equipment identifier"
+  );
+}
+
+function registerUnique(
+  values: Set<string>,
+  value: string,
+  label: string
+) {
+  if (values.has(value)) {
+    throw new Error(`Distribution-board subtree contains duplicate ${label}.`);
+  }
+  values.add(value);
+}
+
+function assertNonEmptyString(
+  value: unknown,
+  field: string
+): asserts value is string {
+  if (typeof value !== "string" || !value.trim()) {
+    throw new Error(`${field} must be a non-empty string.`);
+  }
+}
+
+function assertNullableString(
+  value: unknown,
+  field: string
+): asserts value is string | null {
+  if (value !== null) {
+    assertNonEmptyString(value, field);
+  }
+}
+
+function assertFiniteNumber(
+  value: unknown,
+  field: string
+): asserts value is number {
+  if (typeof value !== "number" || !Number.isFinite(value)) {
+    throw new Error(`${field} must be finite.`);
+  }
+}
+
+function isPlainObject(value: unknown): value is Record<string, unknown> {
+  return value !== null && typeof value === "object" && !Array.isArray(value);
+}